Elastic AOP White/Clear MX

Silkflex Polymers Sdn Bhd offers an Elastic AOP variant labelled MX, designed for white and clear flexographic printing. The MX blend follows the same two‑component structure as the standard version, with a white base of 97 % white pigment and 3 % fixer, and a coloured mix of 15‑20 % white, 70‑75 % clear resin, 5‑7 % colour pigment and 3 % fixer. Printing guidelines recommend a squeegee hardness of 60‑65 Shore, a mesh of 120 inches per inch and a tension of 25 N / cm². After application the film should be blow‑dried, air‑dried for 2‑4 hours and heat‑cured at 130‑160 °C for two minutes before handling.

In the broader market, MX‑type elastic AOPs are valued for faster cure cycles and improved elasticity at lower temperatures. Standard industry practice keeps fixer content at 3 % to preserve flexibility while limiting yellowing. Typical viscosity for such additives lies in the 30‑40 cPs range at 25 °C, and they are formulated to remain stable for up to 12 months when stored below 25 °C. Silkflex’s MX formulation adheres to these norms, providing a reliable option for high‑speed printing lines.

The MX variant is targeted at manufacturers of stretch‑oriented packaging films, high‑performance labels and coated substrates that require rapid post‑print curing. Buyers such as packaging converters and label producers often seek this product for its balance of elasticity and clear finish. As with the standard version, bulk packaging is offered but exact MOQ, Incoterms and payment conditions must be clarified with Silkflex before any purchase is finalised.

Silkflex Polymers Sdn Bhd is based at No.98 (Lot 9115) Jalan Tengah Ks 10, Telok Gong, Pelabuhan Klang, Selangor 42000, Malaysia. The harbour‑level trust tier confirms that the basic corporate details have been validated by the platform. Its current response rate is recorded as 0 %, indicating that buyers should initiate direct contact to assess communication speed. The company’s product line focuses on polymer additives for printing and coating industries.

The public profile does not list specific certifications, production capacity or minimum order quantities. Prospective purchasers are advised to request a material safety data sheet and any compliance certificates relevant to their market. Shipments originate from the Port Klang region, facilitating sea freight to regional hubs and global destinations.