Import Breccia Aqua High Glossy Tiles — Buy in Bulk from Supplier in India

Estto Cera manufactures Breccia Aqua High Glossy Tiles as large-format porcelain stoneware with dimensions of 600 by 1200 mm, a size category that minimizes grout joints and creates visually continuous surfaces. The high-gloss glaze produces specular reflection that amplifies ambient light, a characteristic exploited in retail and hospitality interiors where spatial perception matters. The breccia patterning mimics natural stone fragmentation, with tonal variation across the tile face requiring batch planning for consistent installation appearance. This listing originates from Gujarat or Rajasthan ceramic production zones, where Indian manufacturers have developed particular strength in polished glazed vitrified tile output for Middle Eastern and African export markets.

The ceramic body is formulated from refined clay, feldspar and quartz sintered at temperatures exceeding 1200 degrees Celsius, producing vitrified porcelain with water absorption typically below 0.5% for this product category. The high-gloss surface layer consists of glazed coating fired in a second pass, achieving hardness sufficient for residential and light commercial foot traffic but potentially susceptible to visible scratching under abrasive contamination. Rectified edges, if offered, allow butt-joint installation with minimal grout width, though confirm whether Estto Cera supplies rectified or pressed-edge variants. The 600 by 1200 mm format at typical 9-11 mm thickness yields approximately 33 kilograms per square metre installed weight, a figure that structural substrates and adhesive specification must accommodate.

Primary buyers include residential developers, hotel operators, retail chain designers and commercial office fit-out contractors seeking cost-effective stone aesthetics with ceramic performance predictability. Applications span living room flooring, bathroom walls and floors, hotel lobbies, restaurant interiors and retail showroom surfaces where the reflective gloss supports brand presentation. The supplier indicates suitability for both floor and wall use, though gloss levels above 80 GU on floors require slip resistance verification for wet areas through pendulum or ramp testing. Importers should confirm whether Estto Cera provides matching skirting tiles, decorative borders or complementary matte variants for slip-critical zones, and whether the stated ISO and CE compliance refers to current, auditable certifications or aspirational standards.

Estto Cera holds harbor-tier platform verification with imported-tier supplier classification, indicating the company sources certain inputs or technologies from outside India while manufacturing domestically. The zero percent response rate and zero average response hours suggest limited platform-mediated communication history, so direct contact through the provided business channels is necessary for reliable engagement. The supplier's location in India's ceramic manufacturing belt provides access to raw material supply chains and established export logistics for Middle Eastern, African and South Asian markets, though specific export destinations and experience are not stated in the available profile.

No information is provided about factory size, annual output, years of operation, specific production equipment such as digital printing lines or continuous firing kilns, or quality management certification status. The source description references ISO and CE compliance, but the listing does not confirm current certification numbers, scopes, or accreditation bodies, requiring direct verification. Buyers should ascertain whether Estto Cera operates its own manufacturing or functions as a trading company sourcing from multiple production facilities, as this affects batch consistency and quality accountability. The supplier's capabilities in customised colour matching, bespoke size development, or project-specific large volume supply should be confirmed before tender participation or specification inclusion.