Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

The BRC1920X-SDI HD Infrared Laser Camera is a surveillance device built around a 50-degree laser source with a maximum illumination distance of 300 to 800 metres, enabling operators to capture imagery across extensive perimeters in near-total darkness. Its digital illumination angle control adjusts down to a minimum of 0.1 degrees, allowing pinpoint beam concentration or wide-area flood as conditions demand. The camera outputs high-definition video over SDI, a broadcast-standard serial digital interface that preserves uncompressed signal integrity across long cable runs.
The housing is engineered for outdoor deployment, with construction intended to withstand temperature cycling, moisture ingress and mechanical vibration typical of security infrastructure. An infrared laser diode array provides the active illumination source, operating in the near-infrared spectrum invisible to the human eye and therefore covert to subjects under observation. The 0.1-degree minimum angle is standard for precision-targeting applications where spill-over illumination would compromise concealment or waste energy on non-critical areas.
Buyers in border control, critical infrastructure protection and large-scale industrial monitoring integrate this camera into existing video management systems via its SDI backbone, avoiding the latency and compression artefacts common with IP-only alternatives. The 300 to 800 metre range bracket suits mid-to-long-range corridors, coastal perimeters and airfield boundaries where mid-wave thermal cameras would lack the resolution for identification tasks. Before committing, confirm with Hope Wish Photoelectronics Co., Ltd. the exact laser class rating, eye-safety certification and any region-specific import compliance for laser-emitting equipment.
| Laser source angle | 50 degrees maximum |
| Illumination distance | 300 m to 800 m (source range) |
| Minimum illumination angle | 0.1 degrees (digital control) |
| Video output interface | SDI (Serial Digital Interface) |
| Imaging resolution | High-definition (HD) - exact pixel count not stated; confirm with supplier |
| Laser wavelength | Near-infrared (typical 808 nm or 940 nm for covert surveillance; confirm with supplier) |
| Ingress protection rating | Not stated; typical IP66 or IP67 for outdoor security cameras; request test certificate |
| Operating temperature | Not stated; typical -40 degrees C to +60 degrees C for industrial laser cameras; confirm with supplier |
| Power supply | Not stated; typical 12 V DC or 24 V AC for security cameras; confirm voltage and consumption |
| Laser safety class | Not stated; IEC 60825-1 Class 1 or Class 1M typical for commercial surveillance; request classification certificate |
Hope Wish Photoelectronics Co., Ltd. is located at Kaituo Road No. 2269 in Jinan, Shandong Province, China, with postal code 250000. The supplier is classified under an imported tier within the harbour trust band. The listing shows a response rate of 0.00 percent and an average response time of zero hours, which indicates no recorded buyer engagement through this channel.
The company profile does not state its year of establishment, registered capital, factory size, employee count, or any certifications held. No client references, case studies, or export history are provided in the source material. Buyers should treat claims in third-party marketing copy as unverified until corroborated directly by the supplier, and should request a factory profile, ISO quality certificates and laser product safety documentation before advancing to sample or trial orders.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Before placing an order with Hope Wish Photoelectronics Co., Ltd., verify that the company holds a valid business licence with scope covering laser product manufacturing, and request copies of ISO 9001 and any ISO 14001 certificates. Ask for the IEC 60825-1 laser safety test report specific to the BRC1920X-SDI model, not a generic factory certificate. Confirm that the declared laser power and wavelength match the import regulations of your destination country, as many jurisdictions restrict Class 3B or higher lasers without special permits.
Logistics from Jinan, Shandong typically ship through Qingdao or Tianjin port. Lead time, Incoterms and payment terms are not stated in the listing, so negotiate whether the quote is EXW factory, FOB Qingdao or another term. Sea freight to European or North American ports generally takes 25 to 40 days; allow additional time for Chinese export licence processing for laser-controlled items. Payment structures common with Chinese electronics suppliers include 30 percent T/T deposit with 70 percent against B/L copy, but this must be confirmed directly with Hope Wish Photoelectronics Co., Ltd.
On receipt, inspect the camera housing for physical damage and check the laser aperture window for contamination or misalignment. Power the unit in a controlled environment and measure the actual illumination range against a calibrated reflectance target at 100 metres, 300 metres and maximum claimed distance. Verify SDI signal integrity with a waveform monitor for jitter and eye-pattern compliance. Retain all documentation for customs duty classification; laser products often require HS code 9013.20 or 8525.89 depending on local interpretation, and incorrect classification can delay clearance.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
Securing a reliable supply chain for Brc1920x-Sdi Hd Infrared Laser Camera is critical for maintaining your business operations. Hope Wish Photoelectronics Co., Ltd., a verified supplier located in China, provides high-quality Brc1920x-Sdi Hd Infrared ready for international export. By connecting directly with this supplier, buyers can bypass intermediaries, negotiate custom wholesale pricing, and arrange bulk shipments. This product is a key offering within the Products industry, catering to distributors, wholesalers, and importers worldwide.
Navigating the complexities of global sourcing is easier when you have direct access to the right manufacturers and exporters. When importing Brc1920x-Sdi Hd Infrared from China, buyers can discuss shipping logistics, packaging requirements, and preferred payment terms directly with Hope Wish Photoelectronics Co., Ltd.. This seamless communication is powered by EximNext, a premier B2B marketplace that connects ambitious buyers with verified global sellers across every major industry.
We understand that verifying supplier credentials is a top priority for importers. Hope Wish Photoelectronics Co., Ltd. is part of our extensive network of vetted international exporters. Browse more products in the Related category or discover new suppliers across the Products sector. Expand your sourcing capabilities through our trusted global B2B marketplace — the import export marketplace built for serious international trade.
When importing Brc1920x-Sdi Hd Infrared from China, buyers should consider shipping terms (FOB, CIF, EXW), customs documentation requirements, and payment security. Contact the supplier to discuss the best logistics options for your destination country.
Click the "Request Quotation" button to contact Hope Wish Photoelectronics Co., Ltd. directly. The supplier will provide a custom quote based on your required bulk quantity and shipping destination.
Yes, Hope Wish Photoelectronics Co., Ltd. provides Brc1920x-Sdi Hd Infrared for bulk export from China. You can negotiate the MOQ, packaging details, and shipping terms directly with the supplier.
Shipping terms such as FOB, CIF, or EXW can be negotiated directly with Hope Wish Photoelectronics Co., Ltd.. Contact the supplier to discuss the best logistics options for importing Brc1920x-Sdi Hd Infrared to your country.
Send a direct message to Hope Wish Photoelectronics Co., Ltd. through our platform to request a product sample before committing to a large wholesale order.
Hope Wish Photoelectronics Co., Ltd. is a registered and verified supplier on EximNext. We recommend using our secure messaging system and standard international payment methods (L/C, T/T, Escrow).
Request a detailed product data sheet including grade, purity, dimensions, material composition, and applicable industry standards from Hope Wish Photoelectronics Co., Ltd..
Many suppliers on EximNext, including Hope Wish Photoelectronics Co., Ltd., offer custom packaging and private label options for bulk wholesale orders.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services.
Yes, EximNext hosts a wide network of verified Related manufacturers, exporters, and wholesalers across 200+ countries.
Click "Request Quotation" or "Contact Supplier" on this page. Include your required quantity, destination country, and preferred shipping terms. All communications are managed securely through our B2B marketplace.
Discover more products in Products from verified suppliers worldwide.