Import 300x600 Mm Porcelain Tiles — Buy in wholesale FOB from Supplier in India

Ace Ceramica produces 300 x 600 mm porcelain tiles from its base in Ahmedabad, Gujarat, a state that accounts for a significant share of India's ceramic and vitrified tile output. The 300 x 600 mm format is a standard rectangular wall and floor tile size, offering a 1:2 aspect ratio that suits both horizontal and vertical installations. Porcelain tiles in this dimension are typically pressed at higher densities than ceramic alternatives, giving lower water absorption, usually below 0.5 per cent by ISO 10545-3 testing. The supplier's source description positions these as interior-oriented tiles for kitchens, bathrooms, and general residential rooms, rather than heavy-traffic commercial floors.

Porcelain body tiles of this class are generally made from refined clay, feldspar, and quartz, fired at 1200-1300 degrees Celsius to achieve vitrification. The 300 x 600 mm size is commonly produced in thicknesses from 8 mm to 10.5 mm for standard wall applications, and up to 12 mm for light commercial floor use. Surface finishes vary within the category: glazed porcelain may carry matte, gloss, or satin surfaces, while full-body or double-loaded versions offer through-colour consistency. Gujarat's ceramic belt benefits from local feldspar and quartz deposits, plus established gas-fired kiln infrastructure, which supports consistent output. Typical rectified edge options in this size allow for grout joints as narrow as 2 mm in precision installations.

The primary buyers for 300 x 600 mm porcelain tiles are residential developers, interior fit-out contractors, and tile distributors serving the retail trade. In India's domestic market, this size dominates bathroom wall cladding and kitchen backsplashes; for export, it suits apartment and hospitality projects where a mid-format tile is preferred over large slabs. Packaging is typically carton-boxed on wooden pallets, with 5-6 pieces per box covering roughly 0.9 to 1.08 square metres depending on thickness and corner protection. Buyers should confirm with Ace Ceramica whether the offering is glazed or unglazed, the precise thickness, and the surface finish variant, as these affect both duty classification and installation specification.

Ace Ceramica operates from an address in Phase 2 of Naroda GIDC, Ahmedabad, Gujarat, placing it within one of India's densest ceramic manufacturing corridors. The Gujarat Industrial Development Corporation zone at Naroda hosts hundreds of tile and sanitaryware operations, with established supply chains for raw materials and logistics connectivity to Mundra and Kandla ports. The supplier's trust tier is listed as harbour, and its response rate is shown as 0.00 per cent with zero average response hours recorded. These signals suggest the profile is present on the platform but may not be actively monitored for inbound enquiries through this channel.

The available profile data for Ace Ceramica does not state founding year, production capacity, number of employees, export destinations, or certification holdings. No factory audit status, ISO registration, or specific quality-control protocols are mentioned in the source material. Buyers should therefore treat direct communication as essential: verify production lead times, whether the company manufactures directly or sources from third-party kilns, and what quality-assurance documentation accompanies shipments. The physical address provided, 213-214/1 on Road-C, Lane-8, is specific enough for site-visit planning if due diligence requires it.