Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

This 18-inch flat ribbon IDE cable from STC-Cable enables the connection of two ATA devices, such as hard disk drives or optical drives, to a single motherboard IDE port. It supports the ATA 66, ATA 100, and ATA 133 interface standards, allowing for data transfer rates up to 133 MB/s. The cable's 40-pin, 80-conductor design is standard for Ultra ATA/66 and faster interfaces, providing the necessary signal integrity for reliable performance.
The construction uses a flat ribbon-style cable, which is typical for IDE connections and helps with routing inside a computer case. The 18-inch (approximately 457 mm) length is a common size for internal desktop installations. This cable is designed to connect a Master and a Slave device on the same channel, a standard configuration for systems using the legacy Parallel ATA interface. The connector ends are typically keyed to prevent incorrect insertion.
System integrators, repair technicians, and buyers maintaining older computer hardware are the primary market for this cable. It is used to connect internal peripherals like CD-ROM drives, DVD-ROM drives, tape backup units, and Zip drives. When sourcing from STC-Cable in Shenzhen, buyers should confirm the exact pin configuration and ribbon cable thickness, as these can vary. The listed response rate for the supplier is currently zero, so direct communication to verify stock and minimum order quantities is essential before placing a bulk order.
| Cable Length | 18 inches (457 mm) |
| Interface Standard | Ultra ATA/66, ATA/100, ATA/133 |
| Connector Type | 40-pin, 80-conductor IDE |
| Cable Style | Flat ribbon |
| Supported Drives | 2 (Master and Slave) |
| Maximum Data Rate | 133 MB/s (typical for ATA/133) |
| Typical Conductor Count | 80 conductors (standard for Ultra ATA/66+) |
| Typical Wire Gauge | 28 AWG (standard for internal ribbon cables) |
| Typical Connector Pitch | 2.54 mm (standard IDE pin spacing) |
| Typical Jacket Material | PVC (standard for internal data cables) |
STC-Cable is a supplier based in the Songgang district of Shenzhen, Guangdong, China, with the postal code 518105. The company is listed on the platform with a 'harbor' trust tier. However, its profile shows a response rate of 0.00% and an average response time of 0 hours, indicating that buyer inquiries may not be actively monitored through the platform's messaging system.
The supplier's listing for this IDE cable provides a functional product description but does not disclose details such as company history, production capacity, export experience, or client references. All trade and verification information must be established through direct contact outside of the platform's current response metrics. Buyers are advised to request company documentation and product certifications directly before proceeding with an order.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Before ordering this IDE cable from STC-Cable, verify the exact specifications against your motherboard and drive requirements. Confirm the cable uses an 80-conductor design if you need ATA/66 or faster speeds. Request detailed product photos or a datasheet to inspect connector quality and ribbon cable construction, as these are critical for reliable data transfer.
Discuss logistics and trade terms directly with the supplier. Since the platform response rate is listed as zero, establish contact via alternative methods like email. Clarify minimum order quantity, packaging for bulk shipments (e.g., individual bags or spools), and available shipping methods from Shenzhen. Get a clear lead time estimate for production and dispatch.
For quality assurance, ask STC-Cable if they perform continuity testing on each cable. For a large order, consider requesting a sample batch first to test compatibility and performance with your specific hardware. Verify that the connectors are properly moulded and that the cable length is accurate, as even small deviations can affect installation in tight computer cases.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing 18in Dual Drive Ultra Ata Ide Hard Drive Cable for your business, securing the right balance of quality and cost is essential. STC-Cable, a verified supplier based in China, offers this product for international export. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $3/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is a staple in the Wires & Cables sector with strong demand from importing countries worldwide.
Importing 18in Dual Drive Ultra Ata requires careful attention to shipping logistics, customs compliance, and secure payment terms. STC-Cable offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading B2B marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this 18in Dual Drive Ultra Ata has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Wires & Cables category and connect with top-tier exporters on our comprehensive global B2B marketplace. Start your sourcing journey today.
Importing 18in Dual Drive Ultra Ata requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for 18in Dual Drive Ultra Ata Ide Hard Drive Cable from STC-Cable is $3/Bags on FOB terms from China. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to STC-Cable through EximNext.
The supplier, STC-Cable, has set a Minimum Order Quantity (MOQ) of 1 Bags for 18in Dual Drive Ultra Ata. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
The HS Code classification for 18in Dual Drive Ultra Ata Ide Hard Drive Cable depends on the specific grade and form. Contact STC-Cable through EximNext for the exact HS Code and customs documentation required for your destination country.
To import 18in Dual Drive Ultra Ata from China, negotiate shipping terms (FOB, CIF, or EXW) directly with STC-Cable. Ensure you have the necessary import licenses for Wires & Cables products in your destination country.
Yes, STC-Cable is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to STC-Cable through EximNext.
STC-Cable offers 18in Dual Drive Ultra Ata with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
18in Dual Drive Ultra Ata is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from STC-Cable through our platform.
STC-Cable maintains international quality certifications. These ensure that the 18in Dual Drive Ultra Ata meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. STC-Cable will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with STC-Cable.
Discover more products in Wires & Cables from verified suppliers worldwide.