Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

ACTIVE WHOLESALE LLC offers brass scrap recovered from industrial and manufacturing operations across the United States, with a copper-zinc alloy composition spanning 55-85% copper and 15-45% zinc. The material arrives as clean segregated scrap, brass turnings, and cuttings, all positioned for remelting in foundries and secondary metal production facilities. This is bulk material for export, with metal recovery rates dependent on the specific scrap form and contamination level.
The brass scrap falls within standard Cu-Zn alloy ranges, with copper content varying significantly based on whether the source material is yellow brass (approximately 60-70% copper), red brass (85% copper), or plumbing brass grades. Zinc acts as the primary alloying element, with trace lead, tin, or iron possible depending on the original application (valves, fittings, machined components, or decorative articles). Clean, uncoated scrap commands premium recovery; mixed or contaminated lots require additional sorting or preprocessing before smelting. The supplier notes industrial sourcing channels, which typically yield more consistent chemistry than post-consumer collection streams.
Foundries, secondary smelters, and metal refiners constitute the primary buyers, using this feedstock to produce ingots, billets, or direct-cast products without virgin mining. Common end-uses include plumbing fixtures, electrical connectors, decorative hardware, and musical instrument components. Buyers should verify current alloy split, contamination thresholds, and any ferrous or non-ferrous attachments before committing. Packaging and shipment terms, including container loading and Incoterms, must be confirmed directly with ACTIVE WHOLESALE LLC given the unverified response rate.
| Copper content | 55-85% (supplier-stated range) |
| Zinc content | 15-45% (supplier-stated range) |
| Alloy family | Copper-zinc (Cu-Zn) brass |
| Typical material forms | Brass turnings, cuttings, clean segregated scrap (typical) |
| Typical brass scrap density | 8.4-8.7 g/cm³ depending on copper percentage (standard) |
| Typical melting range | 900-940°C for common yellow brass grades (standard) |
| Typical copper recovery rate | 85-95% for clean, uncoated scrap (typical industry range) |
| Intended processing route | Remelting in foundries and secondary metal production |
| Typical contaminant to monitor | Ferrous attachments, leaded components, oil residues (standard) |
| Source profile | Industrial and manufacturing operations recovery |

ACTIVE WHOLESALE LLC maintains a registered address at 2266 Lilac Avenue, Bloomington, California, 92316, placing the supplier within the greater Los Angeles logistics basin with access to the Port of Long Beach and Port of Los Angeles for export shipments. The supplier tier is marked as 'imported' with a 'harbor' trust classification, indicating a marketplace-imported profile rather than a platform-native verified account. The response rate stands at 0.00% with zero average response hours recorded, which signals that direct communication attempts through standard channels may not yield timely replies.
The company profile does not state founding year, employee count, annual turnover, specific furnace or processing equipment, nor named domestic or international clients. No certifications (ISO, RIOS, ISO 14001) are listed, and no documented environmental compliance or scrap metal dealer licensing is mentioned. The business positions itself as a wholesale exporter of bulk brass scrap, with material sourced from industrial and manufacturing channels rather than consumer recycling streams. Buyers should conduct independent due diligence on licensing, past shipment records, and reference checks before advancing deposits or signing contracts.
Premium brass scrap sourced from industrial and manufacturing operations, containing a copper-zinc alloy composition suitable for remelting and recycling in foundries and metalworking facilities worldwide. This bulk brass scrap material is ideal for export and international trade, offering consistent quality for smelters and secondary metal producers. Available in various forms including brass turnings, cuttings, and clean segregated scrap meeting international specifications for efficient processing and high metal recovery rates.
| 企业类型 | Supplier |
| 成立年份 | Contact Supplier |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| 响应时间 | <4h |
| 响应率 | Contact Supplier |
Before placing an order with ACTIVE WHOLESALE LLC, verify that the supplier holds valid California scrap metal dealer licensing and federal_exporter registration if required for your destination country. Request recent assay reports from independent laboratories showing actual copper, zinc, lead, and iron percentages for the specific lot you intend to purchase. Confirm that material origin documentation is available, as some jurisdictions restrict import of scrap metals lacking provenance records. Ask for reference customers or shipment tracking numbers from past brass scrap exports to validate operational capability beyond the listing claims.
Logistics arrangements must be clarified directly with the supplier, including whether material loads at a California inland terminal or requires drayage to the Port of Long Beach or Los Angeles for ocean freight. Standard Incoterms for US-origin scrap exports are FOB (Free On Board) or CFR (Cost and Freight), though CIF may be negotiable for bulk container loads. Payment terms should be confirmed, typically ranging from letter of credit to documentary collection for initial transactions, with open account terms possible only after established trading history. Lead times depend on scrap consolidation periods and vessel scheduling, current port congestion, and any pre-export inspection requirements.
Upon arrival, conduct independent third-party inspection for weight verification (draft survey or weighbridge), moisture content, and representative sampling for laboratory assay. Reject lots exceeding contracted contaminant thresholds or falling outside the specified copper range. Retain samples from each container for potential dispute resolution. Ensure customs documentation lists correct HS codes (7404.00 for copper waste and scrap in most tariff schedules, though precise classification varies by copper content and form). Maintain chain-of-custody records for environmental compliance audits, and confirm that any required import licences for non-ferrous metal waste are current in your jurisdiction.
Active buying requirements from importers looking for Similar products

Compare alternatives, find similar products and connect with verified suppliers
When sourcing Brass Scrap for your business, securing the right balance of quality and cost is essential. ACTIVE WHOLESALE LLC, a verified supplier based in United States, offers this product with key specifications including Clean Brass Scrap, Brass Turnings, Brass Cuttings, Copper 55-85%, Zinc 15-45%, trace lead and other elements, and Variable - turnings, cuttings, borings, or shredded scrap. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $300/Metric Ton and manage bulk orders with a minimum order quantity (MOQ) of 10 Metric Ton. This product is actively traded under HS Code 7404.00, making it a staple in the Brass sector with strong demand from importing countries worldwide.
Importing Brass Scrap requires careful attention to shipping logistics, customs compliance, and secure payment terms. ACTIVE WHOLESALE LLC offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. To ensure a smooth transaction, buyers should verify import duties for HS Code 7404.00 in their destination country. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading import export marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this Brass Scrap has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Brass category and connect with top-tier exporters on our comprehensive online B2B marketplace. Start your sourcing journey today.
Importing Brass Scrap requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties for HS Code 7404.00 in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for Brass Scrap from ACTIVE WHOLESALE LLC is $300/Metric Ton on FOB terms from United States. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to ACTIVE WHOLESALE LLC through EximNext.
The supplier, ACTIVE WHOLESALE LLC, has set a Minimum Order Quantity (MOQ) of 10 Metric Ton for Brass Scrap. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
For international shipping and customs clearance, Brass Scrap is classified under HS Code 7404.00. Buyers should verify their local customs regulations to determine applicable import duties and taxes for this classification.
To import Brass Scrap from United States, negotiate shipping terms (FOB, CIF, or EXW) directly with ACTIVE WHOLESALE LLC. Ensure you have the necessary import licenses for Brass products in your destination country.
Yes, ACTIVE WHOLESALE LLC is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
The key specifications for Brass Scrap supplied by ACTIVE WHOLESALE LLC include Clean Brass Scrap, Brass Turnings, Brass Cuttings, Copper 55-85%, Zinc 15-45%, trace lead and other elements, and Variable - turnings, cuttings, borings, or shredded scrap. For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to the supplier through EximNext.
ACTIVE WHOLESALE LLC offers Brass Scrap with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
Brass Scrap is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from ACTIVE WHOLESALE LLC through our platform.
ACTIVE WHOLESALE LLC maintains international quality certifications. These ensure that the Brass Scrap meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. ACTIVE WHOLESALE LLC will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with ACTIVE WHOLESALE LLC.
Discover more products in Brass from verified suppliers worldwide.