Import Biosafety Cabinet — Buy in Bulk from Supplier in India

Saaskin Corporation Private Limited manufactures biosafety cabinets with outer construction in mild steel powder coated and inner chamber in stainless steel, or optionally fully stainless steel construction. The HEPA filtration system uses main filters sized at 610 x 450 x 75 mm, 915 x 450 x 75 mm, 1220 x 450 x 75 mm, or 1830 x 450 x 75 mm, all rated at 0.3 micron retention efficiency. A corresponding pre-filter bank in 600 x 120 x 50 mm to 1800 x 120 x 50 mm dimensions with 10 micron rating protects the main HEPA, with an additional exhaust HEPA filter of matching main filter dimensions providing redundant containment.

The work access is through a 5 mm polycarbonate door, with gas supply via a dedicated gas cock and electrical provision through a 3-pin 230V/20A socket. Illumination is provided by 20W or 40W LED fittings, supplemented by a 15W or 30W UV germicidal lamp for decontamination cycles. A pressure gauge is fitted as standard for filter monitoring, though the noise level of 65 ± 5 dB at operating speed should be considered for installation in noise-sensitive laboratory zones. The unit operates on 230V AC 50Hz single-phase supply, consistent with Indian and most European electrical standards.

These Class II biosafety cabinets suit microbiology laboratories, pharmaceutical quality control, and clinical diagnostic facilities handling risk group 2 and 3 agents. The multiple width options accommodate single-person to three-person operation, with the 1830 mm width supporting high-throughput screening workflows. Buyers should confirm whether the duct connection is included or remains within their scope, as the source notes 6 inch diameter ducting as buyer responsibility. Importing from Chennai, Tamil Nadu, allows sea freight to most Asian, African, and Middle Eastern ports with competitive transit times.

Saaskin Corporation Private Limited operates from a first-floor office at 275/184, Golden Enclave on Periyar E V R Salai (PH Road) in Kilpauk, Chennai, Tamil Nadu, India. The supplier holds a harbor-tier trust designation with a 0.00% response rate and no recorded response hours, indicating that direct engagement outside standard inquiry platforms may be necessary for timely communication. The registered address is a commercial office rather than manufacturing premises, suggesting the company may operate on an assembly or trading model rather than in-house fabrication.

The supplier profile does not indicate ISO 9001 certification, in-house calibration capability, installed base references, or after-sales service network coverage. No information is provided about design registration, type testing to EN 12469, or NSF/ANSI 49 international certification. Buyers should request evidence of factory acceptance testing protocols and installation qualification documentation before committing to purchase.