Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›The biogas H2S scrubber from Shijiazhuang Banghong Technology Co., Ltd. removes hydrogen sulphide from anaerobic digester output, particularly where medium or high-temperature fermentation produces elevated H2S concentrations. Untreated biogas carries H2S that combines with water to form sulphurous acid, accelerating corrosion in metal pipes, valves and flow meters. The unit addresses both equipment protection and atmospheric pollution concerns by treating gas before combustion or further processing.
H2S scrubbers for biogas typically operate through chemical absorption (iron oxide, activated carbon or caustic wash), biological oxidation or biological filtration, though the supplier does not specify the removal method in the source material. The scrubber must handle variable H2S inlet concentrations common to agricultural, sewage and industrial digesters, with outlet concentrations typically required below 50-150 ppm for engine fuel use or below 10 ppm for pipeline injection. Buyers should confirm the supplier's specific media type, regeneration method and expected media replacement intervals for their biogas composition and flow rate.
This equipment serves biogas upgrading plants, combined heat and power installations, and biomethane injection projects where H2S control is mandatory for engine warranties and environmental compliance. Importers should specify biogas flow rate in m³/h, inlet H2S concentration in ppm or mg/m³, and target outlet concentration to ensure sizing compatibility. The supplier's description focuses on the corrosion and pollution problem rather than technical solution details, so direct technical negotiation is essential to define scrubber configuration, vessel materials and control system scope.
| Intended biogas source | Anaerobic fermentation units, especially medium and high-temperature digesters |
| Target contaminant | Hydrogen sulphide (H2S) |
| Corrosion mechanism addressed | H2S + H₂O formation of sulphurous acid on metal surfaces (pipes, valves, flow meters) |
| Secondary pollutant prevented | SO₂ formation from H2S combustion, subsequent sulphurous acid in exhaust |
| Typical H2S removal method | Typical: iron sponge, activated carbon, caustic scrubbing or biological oxidation (confirm supplier's specific technology) |
| Typical outlet H2S for engine fuel | Standard: <50-150 ppm (confirm target with equipment supplier and local regulations) |
| Typical biogas flow range | Standard: 50-5,000 m³/h depending on digester size (specify project requirement to supplier) |
| Vessel material (typical) | Typical: carbon steel with corrosion coating, HDPE or FRP for caustic systems (confirm with supplier) |
| Pressure rating (typical) | Typical: 5-50 mbar working pressure for low-pressure biogas systems (confirm design pressure with supplier) |
| Control system | Not specified by supplier (request whether H2S monitoring, automatic media regeneration or pH control is included) |
Shijiazhuang Banghong Technology Co., Ltd. is located at No. 618 Peace Road, Shijiazhuang 050000, Hebei Province, China. The supplier holds harbour trust tier status with a zero percent response rate and zero recorded average response hours. No additional company history, registration date, employee count, production capacity or certification information is present in the source profile. Buyers should treat the limited response data as a signal to verify communication channels and supplier viability before financial commitment.
The supplier's product focus appears to be biogas treatment equipment, with this H2S scrubber positioned for anaerobic digestion applications. No information is provided about other product lines, installed base, reference customers, or after-sales service capability. The company profile does not mention ISO 9001, ISO 14001, CE marking or other quality or environmental certifications relevant to pressure vessel or gas treatment equipment export. Buyers should request business registration, quality system certificates and at least two reference installations with operating data before proceeding with quotation.
| 企业类型 | Supplier |
| 成立年份 | Contact Supplier |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| 响应时间 | <4h |
| 响应率 | Contact Supplier |
Before ordering from Shijiazhuang Banghong Technology Co., Ltd., verify the company's business licence, any special equipment manufacturing licence for pressure vessels, and environmental protection product certification if required in your market. Request a technical proposal with process description, mass balance, and guaranteed performance parameters rather than accepting a generic product description. Due to the zero response rate, initiate contact through multiple channels (email, phone, WeChat, trade messenger) and document all commitments in writing before payment. Consider an independent factory audit or third-party inspection if order value justifies the cost.
Logistics from Shijiazhuang, Hebei Province benefits from proximity to Tianjin Port, approximately 300 km by road, or to Qingdao Port. Negotiate Incoterms carefully, FOB Tianjin or CIF destination port are standard for such equipment. The scrubber may ship as a skid-mounted unit requiring flatbed transport, or disassembled for container shipment if dimensions permit. Confirm whether the supplier handles export packing for sea freight corrosion protection. For payment, given limited response history, structure terms with substantial deposit held in escrow, letter of credit release against shipping documents, or at minimum milestone-based payments with holdback until successful commissioning.
Quality verification should include a factory acceptance test (FAT) witnessing pressure testing of the vessel if applicable, material certificate review for wetted parts, and functional testing of any control system. On-site, perform a site acceptance test (SAT) measuring actual H2S inlet and outlet concentrations using calibrated instruments over a minimum 24-hour operating period. Verify that the scrubber meets guaranteed outlet concentration at design flow before final acceptance. Maintain a spare media charge for initial operation, as actual biogas composition may differ from design assumptions. Request operation and maintenance manuals in your required language, and confirm supplier availability for remote troubleshooting during the warranty period.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing Biogas H2s Scrubber for your business, securing the right balance of quality and cost is essential. Shijiazhuang Banghong Technology Co., Ltd., a verified supplier based in China, offers this product for international export. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $1000/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is a staple in the Light & Medium Machinery sector with strong demand from importing countries worldwide.
Importing Biogas H2s Scrubber requires careful attention to shipping logistics, customs compliance, and secure payment terms. Shijiazhuang Banghong Technology Co., Ltd. offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading import export marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this Biogas H2s Scrubber has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Light & Medium Machinery category and connect with top-tier exporters on our comprehensive online B2B marketplace. Start your sourcing journey today.
Importing Biogas H2s Scrubber requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for Biogas H2s Scrubber from Shijiazhuang Banghong Technology Co., Ltd. is $1000/Bags on FOB terms from China. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Shijiazhuang Banghong Technology Co., Ltd. through EximNext.
The supplier, Shijiazhuang Banghong Technology Co., Ltd., has set a Minimum Order Quantity (MOQ) of 1 Bags for Biogas H2s Scrubber. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
The HS Code classification for Biogas H2s Scrubber depends on the specific grade and form. Contact Shijiazhuang Banghong Technology Co., Ltd. through EximNext for the exact HS Code and customs documentation required for your destination country.
To import Biogas H2s Scrubber from China, negotiate shipping terms (FOB, CIF, or EXW) directly with Shijiazhuang Banghong Technology Co., Ltd.. Ensure you have the necessary import licenses for Light & Medium Machinery products in your destination country.
Yes, Shijiazhuang Banghong Technology Co., Ltd. is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to Shijiazhuang Banghong Technology Co., Ltd. through EximNext.
Shijiazhuang Banghong Technology Co., Ltd. offers Biogas H2s Scrubber with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
Biogas H2s Scrubber is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Shijiazhuang Banghong Technology Co., Ltd. through our platform.
Shijiazhuang Banghong Technology Co., Ltd. maintains international quality certifications. These ensure that the Biogas H2s Scrubber meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Shijiazhuang Banghong Technology Co., Ltd. will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Shijiazhuang Banghong Technology Co., Ltd..
Discover more products in Light & Medium Machinery from verified suppliers worldwide.