从Viet Nam供应商批量进口All Kinds Of Stainless Steels

Inox Viet Na Co., Ltd. supplies austenitic stainless steels centred on grades 304 and 316, with chromium content typically 18-20% and nickel 8-14% depending on grade. The 304 variant offers good formability and general corrosion resistance, while 316 adds 2-3% molybdenum for chloride-rich environments. Sheet, bar and tube forms are available with custom dimensions on request. The supplier sources material as an imported-tier trader, with headquarters at 97c Duong Cong Khi Street in Hoc Mon District, Ho Chi Minh City.

Grade 304 stainless steel contains a maximum 0.08% carbon and minimum 16% chromium by standard composition, giving it the characteristic passive oxide layer that self-repairs in oxygenated environments. Grade 316L, the low-carbon variant, limits carbon to 0.03% maximum to prevent sensitisation during welding. Typical mechanical properties include tensile strength of 515-620 MPa for annealed 304 plate, yield strength around 205 MPa, and elongation of 40-60%. Surface finishes range from No. 1 hot-rolled, annealed and pickled through to No. 4 brushed and BA mirror. Mill test certificates should specify heat treatment condition, chemical composition by ladle analysis, and mechanical test results.

Construction buyers use these grades for structural sections, cladding and reinforcement in coastal buildings where 316 is specified within 5 km of salt water. Automotive applications include exhaust systems, trim and fuel tanks. Food processing and pharmaceutical manufacturers require 316L for tanks, piping and equipment subject to CIP/SIP cleaning cycles with chloride-based sanitiser. Medical device makers machine 316LVM for implants and instruments. Importers should confirm whether Inox Viet Na Co., Ltd. stocks mill-certified material with EN 10204 3.1 or 3.2 certificates, or arranges third-party inspection. Payment terms mentioned in source material include L/C and T/T, with FOB and CIF shipping terms offered.

Inox Viet Na Co., Ltd. operates from 97c Duong Cong Khi Street in Hoc Mon District, Ho Chi Minh City, Viet Nam. The supplier is classified as an imported-tier trader, indicating it sources material rather than manufacturing it directly, and holds a harbor trust tier. The response rate is recorded at 0.00% with zero average response hours, which buyers should note when planning outreach. The company markets itself as offering diverse grades, custom sizing and export-quality material with ISO and SGS certification claims, though buyers should independently verify current certificate validity and scope.

The supplier's profile does not disclose year of establishment, production capacity, warehouse footage, employee count, annual revenue, or named client references. No factory audit information, specific quality management system registration numbers, or detailed geographic sourcing routes for the imported material are provided. The address places it in HCMC's northwestern industrial periphery, with proximity to Cat Lai port for export shipment. Buyers should request direct verification of stockholding versus order-on-demand models, and confirm whether the company holds inventory in Viet Nam or brokers direct mill shipments.