从Indonesia供应商批发进口Albasia Door Core/Door Blank — FOB条款

Albasia Nusa Karya manufactures door core and door blank panels from Albasia wood (Paraserianthes falcataria), a fast-growing plantation species native to Indonesia and widely cultivated in West Java. The standard panel measures 1220 mm by 2440 mm with a nominal 25 mm thickness, toleranced at plus or minus 0.2 mm for thickness, plus or minus 30 mm for width, and plus or minus 40 mm for length. Pitch width, the spacing between structural ribbing elements, ranges from 36 mm to 45 mm with a maximum permitted pitch of 45 mm. Pitch length runs from a minimum 150 mm to a maximum 500 mm. The two outer edge strips are specified as finger-jointed, while internal joints may use butt joint construction. Moisture content is controlled to 10 percent plus or minus 2 percent, a critical parameter for dimensional stability in tropical-to-temperate transit and end-use environments.

The material allows sound knots, dead knots, and puttied defects up to 3 mm, with clear and smooth sanding required for putty application. Hole knots are not permitted. Discolouration and blue stain are both allowed provided the blue stain is sanded smooth. These grading rules align with utilitarian door core specifications rather than decorative face-grade panels, reflecting the product's role as a substrate for veneering or painting in finished door manufacturing. Albasia (Sengon) timber has a low density relative to hardwood alternatives, typically 250-340 kg per cubic metre at 12 percent moisture content, which reduces shipping weight and eases machining for door fabricators. The finger-jointed outer strips improve edge integrity during routing and lock mortising, a detail that distinguishes structurally aware core designs from basic blockboard constructions.

Primary buyers include door manufacturers, joinery workshops, and furniture producers seeking cost-effective core materials for interior flush doors and hollow-core door systems. The lightweight characteristic of Albasia makes it particularly suitable for tall interior doors where mass reduction reduces hinge stress. Export packaging follows standard bundle or palletised formats for containerised freight, though specific strapping, corner protection, and moisture barrier specifications are not stated. Buyers should confirm whether Albasia Nusa Karya supplies raw blanks or can perform preliminary sanding to specified grit, and whether the finger-jointed edge strips are available on all four sides or only the long edges as implied by the specification.

Albasia Nusa Karya operates from Pasopati Street, kilometre 6.2, in Dungusiku, Leuwigoong, Garut, West Java, postal code 44192, placing it within Indonesia's major Albasia plantation belt. The supplier holds a 'harbor' trust tier, indicating basic platform registration without extended verification. The response rate is recorded at 0.00 percent with zero average response hours, which means prospective buyers should not expect rapid quotation through platform messaging alone. Direct outreach via the Garut address or known Indonesian timber trade channels may prove more effective for initial contact and sample requests.

The listing describes the product and its specifications in detail but reveals no information about mill capacity, kiln-drying facility ownership, export licence status, or established export markets. There is no mention of SVLK (Sistem Verifikasi Legalitas Kayu) certification, which is mandatory for Indonesian timber product exports to the EU, UK, and other jurisdictions enforcing EUTR or comparable timber legality regulations. Buyers should therefore treat SVLK availability as an unverified variable and request chain-of-custody documentation before assuming compliance. The absence of stated annual output or client references means due diligence on production scale and reliability falls entirely to the importer.