从China供应商批发进口304l Stainless Steel — FOB条款

China Economic Steel Group (guangdong) supplies 304L stainless steel in multiple product forms including coil, strip, plate, sheet, tube, pipe, flat bar and round bar, all based on the low-carbon austenitic grade UNS S30403 with nominal 18 percent chromium and 8 percent nickel. The material conforms to ASTM A240/A240M-20a, EN 10088-2:2005, JIS G4304-2005, GB/T 3280-2015 and IS 6911:2017, giving buyers flexibility to specify the certification standard matching their project requirements. The supplier indicates availability in welded pipe from 1/2 inch to 24 inch NPS per ASTM A312, a common specification for process piping in chemical, pharmaceutical and food processing plants where post-weld annealing is impractical.

The reduced carbon content in 304L, held below 0.03 percent, addresses sensitisation risks that occur when standard 304 is heated into the 450 to 850 degrees Celsius range during welding or thermal cycling. This makes 304L particularly suitable for multipass welded structures, dished heads, and piping systems where subsequent solution annealing is impossible. Mechanical properties for the grade include minimum tensile strength of 485 MPa and minimum yield strength of 170 MPa, with typical elongation around 40 percent in the annealed condition, supporting forming operations such as rolling, bending and deep drawing without intermediate heat treatment. Surface finishes range from hot-rolled No. 1 to cold-rolled 2B, BA, or polished, depending on product form and customer specification.

Industrial buyers source 304L for heat exchanger tubing, chemical reactor vessels, dairy and brewery processing equipment, pharmaceutical clean piping, and architectural trim in corrosive atmospheres. The grade's resistance to organic acids, nitric acid and food industry cleaning chemicals makes it a default selection for hygienic applications. China Economic Steel Group (guangdong) positions this material for international trade, though buyers must independently confirm stock availability, minimum order quantities, lead times and exact dimensional programmes, as these operational specifics are not provided in the listing data.

China Economic Steel Group (guangdong) is located at Guanglong Industrial Zone, Chencun Town, Shunde District, Foshan City, Guangdong Province, 258000, China, a region with established stainless steel processing and distribution infrastructure. The supplier holds a harbour trust tier on this marketplace but displays zero response rate and zero average response hours, indicating no tracked enquiry activity or an inactive account. No verification of manufacturing capability, ISO certification, export licence, or registered capital appears in the available profile, so buyers should conduct independent due diligence before transferring funds.

The listing presents 304L stainless steel across an unusually broad range of product forms, suggesting trading or stocking operations rather than primary mill production. The reference to multiple international standards (ASTM, EN, JIS, GB, IS) implies access to export-oriented material, but buyers must confirm which standard and inspection level applies to their specific order. The absence of stated MOQ, lead time, or price band requires direct negotiation; importers should request references from previous shipments to comparable markets and verify that the supplier can provide EN 10204 3.1 or 3.2 mill certificates for the requested product form.