About Zhengzhou Jinshui Industry & Commerce Co., Ltd. - Wires & Cables Supplier in China

Zhengzhou Jinshui Industry & Commerce Co., Ltd. is based in Zhengzhou, China. The company lists eight active products in its online catalogue. Its offerings are grouped under the Wires & Cables, Electric Conductors and Coaxial Cables categories. The portfolio focuses on aluminium and copper conductors used for overhead lines and service‑drop installations. Product families are identified by HS chapters that cover aluminium alloy conductors and insulated wires.

The catalogue includes All Aluminum Alloy Conductor (AAAC), All Aluminum Conductor Overhead Cable, Aluminum Conductors with Steel Reinforcement and Copper Core PVC Insulation Wire. Duplex Overhead Cable Service Drop and Aerial Cable PE Insulation 6 AWG Shepherd are listed for aerial distribution networks. The Bare Conductor Aluminum Cable (AAC/ACSR) is recorded with HS code 7614.90, placing it in the aluminium alloy article chapter. Material specifications note aluminium alloy 1350‑H19 for AAC and 6201‑T81 steel core for ACSR, with a galvanized steel sheath. Service Drop‑Aluminum Conductor completes the range, targeting low‑voltage distribution systems.

Product Range and Specialties of Zhengzhou Jinshui Industry & Commerce Co., Ltd.

The eight catalogue items comprise aluminium alloy conductors (AAAC), aluminium‑steel reinforced conductors (ACSR), copper core PVC insulated wire, duplex overhead service drops and a PE‑insulated aerial cable. AAAC is typically supplied in grades such as 1350‑H19, offering a minimum tensile strength of 140 MPa and an electrical conductivity of about 61 % IACS. ACSR combines aluminium strands with a galvanized steel core (6201‑T81) to achieve higher tensile strength (≈200 MPa) while retaining aluminium’s conductivity. Copper core PVC wires are normally produced in cross‑sections from 0.5 mm² to 240 mm², with insulation rated for 0.6/1 kV and fire‑performance compliance to IEC 60332. Service‑drop and aerial cables are commonly supplied in 6 AWG (≈4 mm²) or larger, with PE jackets that meet IEC 60502 for low‑voltage aerial applications.

Typical industry specifications for these product families include IEC 60228 for conductor class, IEC 60332 for fire‑resistance of insulated wires, and IEC 60502 for voltage class. Buyers often request certificates confirming alloy composition (e.g., Al 1350‑H19) and steel grade (e.g., 6201‑T81) for ACSR, as well as test reports for tensile strength, sag, and thermal‑rating. Coaxial cable specifications, while not listed in the catalogue, generally follow IEC 61175, with characteristic impedances of 50 Ω or 75 Ω and polyethylene dielectric.

Trade and Export Information - Zhengzhou Jinshui Industry & Commerce Co., Ltd.

China is one of the world’s largest exporters of aluminium conductors and copper insulated wires, and the HS code 7614.90 used for the Bare Conductor Aluminum Cable falls under Chapter 76 (Aluminium and aluminium articles). Related insulated copper wires are classified under HS 8544, which covers electric conductors of copper. Major import regions for these goods include South‑East Asia, the Middle East, Africa and Latin America, where expanding power‑distribution networks drive demand. Importers typically require IEC conformity, ISO 9001 quality‑management certification and, where applicable, RoHS or CE marking for environmental and safety compliance.

Logistically, conductors are shipped on wooden spools or coils packed in 20‑ft or 40‑ft containers, often with moisture‑barrier liners. Standard Incoterms used by Chinese exporters are FOB Shenzhen or CIF destination ports in the buyer’s region. Chinese customs inspections frequently verify HS code declaration, material certificates and compliance with the destination country’s electrical standards before release.

Sourcing from Zhengzhou Jinshui Industry & Commerce Co., Ltd. - Buyer Guidance

Buyers should request a full material test certificate that details alloy composition (e.g., Al 1350‑H19) and steel grade (e.g., 6201‑T81) for the aluminium‑steel reinforced products, together with IEC‑type test reports for tensile strength, sag and thermal rating. For copper‑core PVC wire, a certificate of conductivity (minimum 58 % IACS) and fire‑performance test results to IEC 60332 are standard verification documents. It is advisable to confirm that the supplier’s ISO 9001 certification is current and to obtain a copy of any applicable CE or RoHS declarations before placing an order.

Typical minimum order quantities for bulk conductors range from 10 tonnes to 20 tonnes per grade, with lead times of 30‑45 days after order confirmation. Samples of a representative strand or a short length of insulated wire can be requested for laboratory testing of mechanical and electrical properties. Buyers should verify packaging details - such as coil diameter, pallet configuration and container loading plan - to ensure safe transport and compliance with the destination port’s handling rules.

What product categories does Zhengzhou Jinshui list in its catalogue?

The catalogue includes aluminium alloy conductors (AAAC), aluminium‑steel reinforced conductors (ACSR), copper core PVC insulated wire, duplex overhead service drops, a PE‑insulated aerial cable and a bare aluminium conductor listed under HS 7614.90.

Which HS code applies to the Bare Conductor Aluminum Cable?

The Bare Conductor Aluminum Cable is recorded with HS code 7614.90, which is part of the aluminium alloy article chapter.

What material grades are specified for the aluminium conductors?

The aluminium conductor uses alloy 1350‑H19 for AAAC and alloy 6201‑T81 for the steel core of ACSR, with a galvanized steel sheath for added strength.

What certifications should a buyer request for these conductors?

Buyers should ask for IEC test reports (e.g., IEC 60228, IEC 60332), an up‑to‑date ISO 9001 quality‑management certificate, and any relevant CE or RoHS declarations depending on the import market.

What are typical packaging and shipping formats for these products?

Conductors are usually wound on wooden spools, placed on pallets, and loaded into 20‑ft or 40‑ft containers. Shipping terms commonly used are FOB or CIF, with moisture‑barrier liners to protect the metal surface.

What sample or testing procedures are recommended before a full order?

Request a short length of the conductor or a coil segment for laboratory testing of tensile strength, conductivity and fire resistance. Compare the test results to the IEC specifications mentioned in the product data sheet.

What are typical lead times and minimum order quantities?

Lead times are generally 30‑45 days after order confirmation, and minimum order quantities are commonly set at 10 tonnes per product grade, though they may vary with the specific conductor size.

Which regions most frequently import these types of conductors from China?

Importers in South‑East Asia, the Middle East, Africa and Latin America are the largest buyers of Chinese aluminium and copper conductors, driven by expanding electricity distribution networks.