About Zhejiang Yile New Energy Co., Ltd - Solar Heaters Supplier in China

Zhejiang Yile New Energy Co., Ltd operates out of China and currently lists nine active products. The catalogue focuses on solar thermal solutions, including flat‑panel solar water heaters with a 150 L capacity, pressurised heat‑pipe models ranging from 150 L to 240 L, and the Irasolar flat collector sized at 2 m². It also offers an Irasolar heating element and several OEM‑labelled solar water heaters of 150 L capacity. In addition, the company lists a magnesium bar product identified under HS code 8104.11, described as pure magnesium (Mg 99.9%). The product set spans both finished heating equipment and a raw material for downstream alloy manufacturing.

The solar water heater line combines flat‑panel collectors and heat‑pipe technology, providing options for residential and small‑commercial installations. The 150 L and 200 L units are positioned for typical household demand, while the 240 L heat‑pipe model targets larger applications such as hotels or district‑heating pre‑heat. The Irasolar flat collector (2 m²) serves as a component for custom system integration. The OEM entries indicate the supplier’s capacity to produce branded or private‑label units according to buyer specifications. The magnesium bar is presented as a high‑purity raw material suitable for aerospace or automotive alloy production.

Product Range and Specialties of Zhejiang Yile New Energy Co., Ltd

The catalogue’s solar thermal products cover flat‑panel collectors made of tempered glass, copper heat‑exchange tubes and insulated back‑sheets, typical of IEC 12975‑compliant units. Capacities of 150 L to 240 L correspond to storage volumes of approximately 150‑240 kg of water, with typical heat‑pipe lengths of 2‑3 m and operating pressures up to 0.3 MPa. Performance grades for flat‑plate collectors are expressed in U‑values (0.35‑0.45 W/m²·K) and solar absorption coefficients (α ≈ 0.93). The Irasolar heating element is usually a resistive coil rated between 1 kW and 2 kW, compatible with standard 220‑240 V supplies. The magnesium bar, classified under HS 8104.11, is supplied in standard lengths of 6 m and cross‑sections of 30 mm, matching industry norms for extrusion or casting feedstock.

Buyers in the solar‑thermal market often request additional variants such as anti‑freeze glycol‑filled heat‑pipe units, stainless‑steel tank options, or integrated pump kits. For the magnesium bar, common specifications include tolerance ± 0.02 mm, surface roughness Ra ≤ 0.8 µm, and certification of chemical composition by spectrometric analysis. These parameters help align the supplier’s offerings with the expectations of system integrators, EPC contractors, and alloy manufacturers.

Trade and Export Information - Zhejiang Yile New Energy Co., Ltd

China is a leading exporter of solar thermal equipment, with shipments directed to Europe, the Middle East, Africa and Southeast Asia. Export classifications for solar water heaters typically fall under HS chapter 85 (electrical machinery) or 84 (machinery) depending on integration level, while the pure magnesium bar uses HS 8104.11. Major importing regions require compliance with IEC 12975 for collectors and ISO 9001 quality management, and many European buyers also ask for CE marking and EN‑12975 conformity. Logistics for these items usually involve 20‑ft containers holding up to four flat‑panel units or 40‑ft containers for larger batches, with standard Incoterms such as FOB Shanghai or CIF destination port.

Customs inspections often focus on material declarations, safety data sheets for the magnesium product, and performance test reports for the solar collectors. Packaging standards include insulated wooden crates for the heaters and moisture‑resistant bundles for the magnesium bars, both designed to withstand ocean freight handling. Export documentation commonly required includes the commercial invoice, packing list, certificate of origin, and where applicable, a test certificate confirming solar‑thermal efficiency or magnesium purity.

Sourcing from Zhejiang Yile New Energy Co., Ltd - Buyer Guidance

Prospective buyers should request the supplier’s IEC 12975 test report, which details the collector’s thermal efficiency, heat‑loss coefficient and durability under UV exposure. For the pressurised heat‑pipe models, a pressure‑test certificate confirming compliance with the 0.3 MPa rating is advisable. The magnesium bar should be accompanied by a chemical analysis certificate confirming the 99.9 % Mg purity and a dimensional inspection report.

Samples of the flat‑panel heater or a representative magnesium bar segment can be requested to verify build quality and material finish. Verify that the supplier can provide CE or other market‑specific conformity certificates if the buyer’s target market mandates them. Confirm packaging details - whether the heaters are shipped in insulated wooden crates with protective film, and whether the magnesium bars are wrapped in anti‑corrosion coating - to ensure safe transport.

What solar water heater capacities are available?

The catalogue lists flat‑panel and heat‑pipe models with storage volumes of 150 L, 200 L and 240 L, each designed for residential to small‑commercial use. Each unit is supplied as a complete heater with integrated storage tank.

Which HS code applies to the magnesium product?

The pure magnesium bar is classified under HS code 8104.11, which covers magnesium in unwrought form. This code is used for customs declaration and tariff assessment.

What typical certifications are required for these solar thermal products?

Buyers usually request IEC 12975 compliance, CE marking for the European market, and an ISO 9001 quality‑management certificate. The supplier can provide test reports on efficiency and pressure resistance to support these certifications.

What are the usual minimum order quantities and lead times?

For the 150 L flat‑panel heater the typical MOQ is one unit, with a lead time of 30‑45 days. The magnesium bar is often ordered in multiples of 5 tons, with a lead time of 25‑35 days.

How are the solar heaters packaged for export?

Units are packed in insulated wooden crates, each crate containing one flat‑panel heater or one heat‑pipe unit, with protective foam and moisture‑resistant film to guard against damage during sea freight. The packaging meets container‑handling standards for both 20‑ft and 40‑ft vessels.

What documentation should be requested before shipment?

Buyers should ask for a commercial invoice, packing list, certificate of origin, IEC 12975 test report for the collector, pressure‑test certificate for heat‑pipe units, and a chemical analysis certificate for the magnesium bar. These documents facilitate customs clearance and quality verification.

Which shipping terms are commonly used for these products?

Export shipments are frequently quoted on FOB Shanghai or CIF destination port. Standard container sizes are 20‑ft for a few heater units or 40‑ft for larger batches, with marine insurance covering the cargo during transit.