About Zhejiang Kyungshin Automobile Parts Co., Ltd. - Automobile Parts Supplier in China

Zhejiang Kyungshin Automobile Parts Co., Ltd. is based in China and currently lists twelve active products across a spectrum of automotive components. The catalogue includes engine bearings (HS 8483.30), pistons, piston rings, crankshafts (HS 8483.60), engine valves, gaskets, oil and water pumps, brake pads (HS 8708.83), clutch bearings (HS 8482.40), valve seals, and ball joints (HS 7307.19). Each entry is tied to a material family such as steel‑backed Babbitt, aluminum alloy, copper‑lead for bearings, forged steel 42CrMo4 or EN24T for crankshafts, ceramic/organic friction compounds for brake pads, and chrome or high‑carbon chromium steel for clutch bearings. The product set also covers carbon steel ASTM A105, stainless steel 304/316, and alloy steel variants for ball joints.

The supplier’s top‑level categories include Bearings, Piston & Piston Rings, Industrial Valves & Gauges, Industrial Pumps, Automobile Gears, Shafts & Clutches, Gaskets, Automobile Brakes & Spare Parts, and Flanges. The listed items therefore span core power‑train parts (engine bearings, pistons, crankshafts), fluid‑handling equipment (oil and water pumps), friction devices (brake pads, clutch bearings), sealing solutions (gaskets, valve seals) and structural hardware (ball joints). No additional product lines or certifications are stated in the provided data.

Product Range and Specialties of Zhejiang Kyungshin Automobile Parts Co., Ltd.

The product list contains engine bearings made from steel‑backed Babbitt, aluminum alloy or copper‑lead, pistons and piston rings of unspecified material, crankshafts forged from 42CrMo4, EN24T or ductile iron, and engine valves without a disclosed material. Oil and water pumps are offered as industrial pumps, while brake pads use a ceramic or organic friction compound on a steel backing plate. Clutch bearings are supplied in chrome steel (GCr15/AISI 52100) or high‑carbon chromium steel, and ball joints are fabricated from carbon steel ASTM A105, stainless steel 304/316, or alloy steel. The catalogue also references gaskets, valve seals and flanges without material detail.

In the automotive aftermarket, engine bearings are commonly produced to ISO 15243 or DIN 2601 specifications, with hardness values between 150‑200 HB and clearance tolerances of ±0.025 mm. Pistons and rings typically follow ISO 9001‑based dimensional tolerances of ±0.02 mm and are cast in hypereutectic aluminum or forged steel for high‑performance applications. Crankshafts are graded to ISO 14033, with surface roughness Ra ≤ 0.8 µm. Brake pads are classified into organic, ceramic and semi‑metallic grades, each with a prescribed friction coefficient range (0.30‑0.45) and temperature resistance up to 300 °C. Clutch bearings adhere to ISO 9033, and ball joints are often supplied to ISO 7626 with a minimum tensile strength of 700 MPa for alloy variants.

Trade and Export Information - Zhejiang Kyungshin Automobile Parts Co., Ltd.

China remains one of the world’s largest exporters of automotive mechanical components, supplying Europe, North America, Southeast Asia and the Middle East. The HS codes recorded (8483.30, 8483.60, 8708.83, 8482.40, 7307.19) place these items in Chapter 84 (machinery) and Chapter 73 (iron and steel) of the Harmonised System, which are subject to standard customs documentation, country‑of‑origin marking and, where required, anti‑dumping duties for specific markets.

Buyers typically request ISO 9001 or IATF 16949 quality management certification, mill test certificates (MTC) for steel grades, and compliance with regional standards such as ECE R‑90 for brake components or SAE J‑446 for piston rings. Packaging for heavy metal parts is usually in wooden crates with moisture‑resistant liners, while smaller items like valve seals may be packed in corrugated boxes with polymer film. Sea freight in 20‑ft or 40‑ft containers under FOB or CIF terms is the common logistics mode, with container load factors ranging from 1,200 kg for brake pads to 3,500 kg for bulk steel bearings.

Sourcing from Zhejiang Kyungshin Automobile Parts Co., Ltd. - Buyer Guidance

When sourcing from this supplier, buyers should request detailed material certificates for each steel grade (e.g., GCr15, ASTM A105) and hardness test reports for bearing and clutch components. Dimensional inspection reports aligned with ISO tolerances, as well as performance test data for brake pads (friction coefficient, wear rate) and piston rings (ring gap, blow‑by pressure), are standard verification items. Samples of critical parts such as engine bearings or brake pads are usually provided in small‑batch shipments to allow OEM‑level testing before full‑scale orders.

Typical minimum order quantities in the Chinese automotive parts market range from 500 units for precision bearings to 2,000 units for bulk‑produced gaskets, with lead times of 30‑45 days after order confirmation. Buyers should confirm packaging specifications (crate dimensions, anti‑corrosion coating) and clarify the applicable Incoterm (FOB Shanghai or CIF Shanghai) to align with their supply‑chain schedule.

What automotive components does Zhejiang Kyungshin list in its catalogue?

The catalogue includes engine bearings, pistons, piston rings, crankshafts, engine valves, gaskets, oil and water pumps, brake pads, clutch bearings, valve seals and ball joints, each linked to the HS codes provided in the facts.

Which HS codes are associated with the listed products?

Engine bearings use HS 8483.30, crankshafts HS 8483.60, brake pads HS 8708.83, clutch bearings HS 8482.40 and ball joints HS 7307.19. Other items are classified under the broader Chapter 84 or Chapter 73 families.

What materials are specified for the engine bearing and clutch bearing products?

Engine bearings are described as steel‑backed Babbitt, aluminum alloy or copper‑lead; clutch bearings are made from chrome steel (GCr15/AISI 52100) or high‑carbon chromium steel.

Are there typical quality standards buyers should request for these parts?

Buyers normally ask for ISO 15243 or DIN 2601 compliance for bearings, ISO 9033 for clutch bearings, and ISO 9001/IATF 16949 quality management certificates for the overall production system.

What are common packaging methods for the heavy metal components?

Heavy items such as bearings and crankshafts are typically packed in wooden crates with moisture‑resistant liners, while smaller parts like valve seals are placed in corrugated boxes with protective polymer film.

What Incoterms are usually applied to shipments from China for these automotive parts?

Suppliers often quote FOB Shanghai or CIF Shanghai, allowing buyers to choose between on‑board freight costs or freight‑included delivery.

What documentation should a buyer verify before confirming an order?

Mill test certificates for steel grades, hardness reports, dimensional inspection reports, and, for brake pads, friction‑coefficient test results should be reviewed to ensure compliance with OEM specifications.

What are typical lead times and minimum order quantities for the listed products?

Lead times are generally 30‑45 days after order confirmation, with minimum order quantities ranging from about 500 units for precision bearings to 2,000 units for bulk‑produced gaskets or pumps.