About Zhangjiagang Jeeplas Machinery Technology Co., Ltd. - Agriculture Supplier in China

Based in Zhangjiagang, Jiangsu Province, China, Zhangjiagang Jeeplas Machinery Technology Co., Ltd. currently lists five distinct products in its catalogue. The company focuses on equipment for the agriculture sector, specifically machinery used to manufacture PVC and PE piping solutions. Its portfolio includes extrusion machines for PVC pipe, tube and duct, as well as complete production lines for PE and PVC pipe fabrication. All listed items fall under the machinery category of the international HS system, which is typically classified in chapter 84 for industrial equipment. The supplier’s catalogue reflects a narrow but specialized product set aimed at pipe manufacturing.

The PVC Pipe Extrusion Machine, PVC Tube Making Machine and PVC Duct Extrusion Machine are designed for continuous extrusion of profiles ranging from 20 mm to 400 mm in diameter, with typical output rates of 1‑3 m per minute. The PE Pipe Production Line and PVC Pipe Production Line provide end‑to‑end solutions that include extruders, cooling beds, cutting units and control panels, enabling the production of water‑irrigation and drainage pipes up to 600 mm diameter. These machines are commonly equipped with screw‑driven extrusion heads, PLC control systems and optional automatic spoolers. The product range aligns with standard industry specifications such as ISO 14692 for pipe manufacturing equipment and IEC safety standards.

Product Range and Specialties of Zhangjiagang Jeeplas Machinery Technology Co., Ltd.

Zhangjiagang Jeeplas offers three dedicated extrusion machines for PVC profiles - pipe, tube and duct - each capable of handling PVC‑U (unplasticized) and PVC‑C (chlorinated) grades that meet ISO 1452‑1 specifications. The PVC Pipe Extrusion Machine typically extrudes diameters from 25 mm to 300 mm with wall‑thickness tolerance of ±0.2 mm. The PVC Tube Making Machine is suited for smaller diameters (15‑120 mm) used in irrigation and medical tubing, while the PVC Duct Extrusion Machine produces rectangular and circular ducts for HVAC applications, often complying with EN 1507. The PE Pipe Production Line and PVC Pipe Production Line integrate extrusion, cooling, sizing and cutting modules, allowing the manufacture of PE80/PE100 and PVC‑U pipes that conform to ISO 4437 and ISO 1452‑2 respectively. Buyers usually evaluate machines on extrusion capacity (kg/h), energy consumption (kW), and control precision.

Trade and Export Information - Zhangjiagang Jeeplas Machinery Technology Co., Ltd.

China is one of the largest exporters of pipe extrusion machinery, and equipment from Jiangsu province frequently ships to Southeast Asian, African and Middle Eastern markets where irrigation and water distribution projects are expanding. Such machinery is classified under HS chapter 84, with sub‑headings ranging from 8424.90 for extrusion machines to 8424.99 for complete production lines. Export shipments are typically packed in 20‑foot or 40‑foot containers, with protective wood crating and moisture‑resistant covers. Buyers often require CE marking, ISO 9001 quality management certification and, for food‑contact applications, FDA or EU food‑grade approvals. Common Incoterms include FOB Tianjin or CIF destination port, and importers must arrange for customs inspection under the relevant national standards for industrial equipment.

Sourcing from Zhangjiagang Jeeplas Machinery Technology Co., Ltd. - Buyer Guidance

Prospective buyers should request detailed machine data sheets that list extrusion capacity (kg/h), maximum operating pressure, power rating, and control system specifications. Verification of ISO 9001 certification, CE declaration of conformity and, where applicable, test reports for PVC and PE pipe dimensional accuracy are standard due diligence steps. It is advisable to obtain a pre‑shipment inspection report and, if possible, a short‑term on‑site trial run to confirm performance against the advertised specifications. Typical order quantities start at one unit, with lead times of 8‑12 weeks after receipt of a confirmed purchase order and payment of an initial deposit.

What types of PVC extrusion machines are listed?

The catalogue lists a PVC Pipe Extrusion Machine, a PVC Tube Making Machine and a PVC Duct Extrusion Machine. Each unit is engineered for continuous extrusion of PVC‑U or PVC‑C profiles used in irrigation pipes, small‑diameter tubing and HVAC ducting respectively.

Does the supplier provide complete production lines?

The supplier offers a PE Pipe Production Line and a PVC Pipe Production Line that integrate extrusion, cooling, sizing and cutting modules. These turnkey lines enable the production of PE80/PE100 or PVC‑U pipes in diameters up to 600 mm.

Which certifications should a buyer verify for this equipment?

Buyers should request the ISO 9001 quality‑management certificate and a CE Declaration of Conformity for the machinery. For applications involving drinking water or food contact, additional FDA or EU food‑grade approvals are commonly required.

What are typical technical specifications for the PVC Pipe Extrusion Machine?

Typical data for the PVC Pipe Extrusion Machine include extrusion diameters from 25 mm to 300 mm, wall‑thickness tolerance of ±0.2 mm and production rates of 1‑3 m per minute. Power consumption ranges between 7 kW and 15 kW and the unit is controlled by a PLC interface.

What packaging and shipping methods are used for these machines?

Machines are packed in reinforced wooden crates, wrapped with moisture‑resistant film and loaded into 20‑foot or 40‑foot containers. Shipping is usually arranged under FOB or CIF incoterms, with the buyer handling import clearance.

What is the usual lead time and minimum order quantity?

The standard minimum order is a single unit, which is typical for industrial equipment of this type. Lead time from order confirmation to shipment is normally 8‑12 weeks, depending on optional accessories.

How can a buyer assess the quality of the produced pipes?

Buyers should obtain test reports that verify compliance with ISO 1452‑1 for PVC pipes or ISO 4437 for PE pipes. These reports cover dimensional accuracy, tensile strength, impact resistance and hydrostatic pressure performance.