About Zabih Siddiqi - Cement Supplier in Pakistan

Zabih Siddiqi operates from Pakistan and currently lists seven active products in its catalogue. The product set covers ordinary Portland cement (OPC) and clinker variants, carbon‑steel billets, steam coal, and laterite nickel ore, each tied to specific HS‑code families such as 2523 for cement products and 7207 for steel billets. The supplier’s catalogue specifies material compositions, for example mild steel with 0.12‑0.25 % carbon and nickel ore containing 2.5‑4 % nickel oxide, providing clear technical baselines for buyers. The listed items include OPC cement (HS 2523.29) described as grade 42.5, OPC clinker (HS 2523.10), cement clinker (HS 2523.21), steel billets (HS 7207.12), steam coal (no HS code provided), and nickel ore (HS 2604.00). These entries reflect typical export classifications used in international trade, allowing importers to match customs documentation and product specifications accurately.

Product Range and Specialties of Zabih Siddiqi

The cement portfolio comprises ordinary Portland cement (OPC) grade 42.5 and three clinker forms (OPC clinker, cement clinker, and general clinker) that conform to standards such as ASTM C150 and EN 197‑1. Typical OPC specifications include a compressive strength of 42.5 MPa at 28 days, fineness of ≤ 350 m²/kg, and a sulfate content ≤ 0.6 %. Steel billets are carbon‑steel (mild steel) with carbon content between 0.12 % and 0.25 %, matching common grades like ASTM A36 or EN 10025‑2, with tensile strength around 400‑460 MPa. Steam coal is usually classified by calorific value (≈ 4 800 - 5 200 kcal/kg) and ash content (< 15 %). Nickel laterite ore is typically processed for a nickel oxide grade of 2.5‑4 % Ni, and buyers often require a moisture content below 5 % and a particle size below 10 mm. These industry benchmarks help buyers compare the supplier’s offerings with global norms.

Trade and Export Information - Zabih Siddiqi

Pakistan is a recognized exporter of cement and clinker to the Middle East, North Africa and South Asian markets, where demand for rapid infrastructure development drives imports. Steel billets from Pakistan often reach regional steel mills in Bangladesh, Sri Lanka and the Gulf Cooperation Council (GCC) states, with HS 7207.12 used for customs clearance. Steam coal exports are generally directed to neighboring countries for power generation, while laterite nickel ore is sourced by smelters in India and Indonesia that require HS 2604.00 documentation. Commonly requested certifications for these commodities include ISO 9001 quality management, ISO 14001 environmental compliance, and product‑specific certificates such as CE marking for cement or ASTM test reports for steel billets. Standard shipment terms involve containerised cement (20‑foot containers holding ~ 25 tonnes) and bulk handling for coal and ore, with Incoterms like CIF or FOB frequently applied.

Sourcing from Zabih Siddiqi - Buyer Guidance

Buyers should request a recent mill test report for cement and clinker that lists strength class, fineness, chemical composition and sulfate content, as well as a certificate of conformity to ASTM C150 or EN 197‑1. For steel billets, a tensile test report, chemical analysis (C, Mn, Si, S, P) and dimensional tolerances (length 6‑12 m, diameter 100‑150 mm) are typical verification documents. Nickel ore purchases normally require an assay report showing Ni, Fe, SiO₂ and moisture, together with a sampling procedure compliant with ISO 17025. Steam coal enquiries should be backed by a calorific value test, ash and moisture analysis, and a bulk density measurement. In all cases, confirming the HS code, country of origin labeling and any required export licenses before order placement reduces customs delays.

What HS codes are used for the cement products listed by Zabih Siddiqi?

The ordinary Portland cement (OPC) and its variants are classified under HS 2523.29, while OPC clinker uses HS 2523.10 and general cement clinker falls under HS 2523.21.

Which grade and standards apply to the OPC cement offered?

The OPC is described as grade 42.5 and typically conforms to ASTM C150 or EN 197‑1, which specify a 28‑day compressive strength of 42.5 MPa and limits on sulfate and chloride content.

What material specifications define the steel billets?

The billets are carbon‑steel (mild steel) with carbon content between 0.12 % and 0.25 %, matching common grades such as ASTM A36. Typical tensile strength is 400‑460 MPa and dimensions are 6‑12 m in length with diameters of 100‑150 mm.

How is nickel ore quality measured for this supplier?

Nickel ore is laterite type with Ni 2.5‑4 % and is usually verified by an assay report that includes nickel oxide, iron, silica and moisture content, often performed under ISO 17025 standards.

What tests are standard for steam coal shipments?

Buyers normally request calorific value (≈ 4 800 - 5 200 kcal/kg), ash content (< 15 %), moisture (< 5 %) and bulk density measurements, documented in a recent lab analysis.

Which certifications should a buyer request before importing these products?

Typical certifications include ISO 9001 for quality management, ISO 14001 for environmental compliance, and product‑specific test reports such as ASTM mill certificates for cement or tensile test reports for steel billets.

What packaging and container sizes are common for the cement products?

Cement and clinker are usually shipped in 20‑foot containers holding about 25 tonnes per container, or in bulk bags of 25 tonnes for larger volumes, with moisture‑resistant lining to protect the product.

What Incoterms are frequently used for these exports from Pakistan?

Exporters often use FOB (Free on Board) for bulk shipments and CIF (Cost, Insurance, Freight) for containerised cement, allowing the buyer to control insurance and freight arrangements.