About Wanqi Metal Products Factory - Metal Products Supplier in China

Wanqi Metal Products Factory operates out of China and currently lists a catalogue of 100 distinct items. The catalogue spans metal and fiberglass products, cable‑handling tools, and a broad set of resin‑based cable joint kits. Each entry is identified by its product name and, where applicable, an HS‑code such as 8205.59 for traceable rodders or 8544.20 for fiberglass‑core cable ducts. The product mix includes wire cable running rods, fish‑tape pullers, various resin joint kits and specialised cable joints for low‑voltage and telecom applications.

The supplier’s active catalogue also references material specifications, for example epoxy or polyurethane resin compounds, copper conductors of 99.9 % purity, and tin‑plated electrolytic copper (Cu 99.99 %). HS‑code families represented include 8536.90 for cable joints, 8544.49 for electrolytic copper joints, and 8547.90 for Scotchcast resin joints. These entries collectively illustrate Wanqi’s focus on electrical‑infrastructure components rather than finished consumer goods.

Product Range and Specialties of Wanqi Metal Products Factory

Wanqi’s product list concentrates on cable‑handling accessories (wire cable running rods, snake cable haulers) and a large portfolio of resin‑based cable joint kits. In the industry, such kits are typically classified by voltage rating, resin type (epoxy vs. polyurethane) and connector material (copper, brass or aluminium). Standard grades for epoxy resin in cable joints target a dielectric strength of 30 kV/mm and a thermal endurance up to 150 °C, while polyurethane formulations are chosen for flexibility and moisture resistance. Copper conductors used in these kits are commonly required to meet IEC 60228 Class 1 purity (≥99.9 % Cu) and tin plating is applied to improve solderability.

Trade and Export Information - Wanqi Metal Products Factory

China is a major exporter of cable jointing solutions, with shipments frequently destined for Southeast Asian power utilities, Middle‑East telecom operators, and European industrial distributors. The HS‑code groups appearing in Wanqi’s catalogue (8205, 8536, 8544, 8547) fall under the broader Chapter 85 “Electrical machinery and equipment” which often triggers customs checks for conformity to IEC standards and, where applicable, RoHS or REACH compliance. Buyers typically request ISO 9001 quality‑management certification and test reports confirming dielectric strength, tensile strength of the copper conductors and resin cure temperature. Packaging for bulk joint kits usually involves wooden crates or 20‑ft containers, with moisture‑proof liners to protect epoxy components during sea freight.

Sourcing from Wanqi Metal Products Factory - Buyer Guidance

When sourcing from Wanqi, buyers should obtain material data sheets that specify resin type, cure cycle, and copper purity, as well as third‑party test certificates for dielectric strength and heat‑ageing performance. Requesting a sample of the specific joint kit (e.g., the “Resin Cable Jointing Kit for Telecom Cables” HS 8544.70) allows verification of connector fit and resin flow before large orders. Verify that the supplier can provide IEC‑type conformity test reports (such as IEC 60840 for medium‑voltage joints) and inquire about the availability of ISO 9001 or ISO 14001 certificates, which are common but not listed in the supplied facts. Confirm packaging details - typically double‑wall wooden boxes with desiccant packs - and the agreed Incoterm (CIF or FOB) to align with logistics planning.

What types of cable joint kits are listed by Wanqi Metal Products Factory?

The catalogue includes epoxy and polyurethane resin joint kits for low‑voltage, armoured, aluminium and telecom cables, identified under HS‑codes 8536.90, 8544.20, 8544.30, 8544.49, 8544.70 and 8547.90.

Which HS‑codes are associated with the traceable rodder products?

The traceable rodders and duct rodders are recorded under HS‑code 8205.59, which covers hand‑tools and accessories made of metal or composite materials.

What material specifications are provided for the resin joint kits?

Materials are described as epoxy or polyurethane resin compounds combined with copper or brass connectors, with copper purity levels of 99.9 % or 99.99 % and tin plating where noted.

Are there standard certifications buyers should request for these cable joint products?

Buyers commonly request IEC conformity test reports (e.g., IEC 60840), ISO 9001 quality‑management certification, and RoHS compliance documentation for resin‑based electrical components.

What is the typical packaging and shipping format for bulk joint kits?

Bulk kits are usually packed in wooden crates or 20‑ft containers with moisture‑proof liners and desiccant packs to protect epoxy resins during sea transport.

How can a buyer verify the electrical performance of the joint kits?

Request dielectric strength test reports (minimum 30 kV/mm for epoxy resin) and tensile strength data for the copper conductors, which are standard performance metrics in the industry.

What are the common lead times for resin joint kits from Chinese manufacturers?

Lead times generally range from 30 to 45 days after order confirmation, depending on the specific kit configuration and required testing documentation.

Which regions typically import the types of products offered by Wanqi?

Typical import markets include Southeast Asia, the Middle East, Africa and Europe, where power distribution and telecom infrastructure projects drive demand for cable jointing solutions.