About Taima Food Ws23 Cooling Agent Co., Ltd. - Food Additives Supplier in China

Taima Food Ws23 Cooling Agent Co., Ltd. is a China-based supplier operating in the chemicals and allied products segment, with a catalogue of 5 active product listings concentrated in food additives, specifically synthetic cooling agents used in oral care and food applications. The supplier's listings centre on menthane-carboxamide cooling compounds marketed under the WS series designations (WS-3, WS-5, WS-12 and WS-23), which are widely used in toothpaste, mouthwash, confectionery, beverages and flavoured chewing-gum formulations. Four of the five listed products are explicitly tagged for toothpaste use, while one is positioned as a food-additive grade, reflecting the dual oral-care and food-application positioning typical of this chemical family. The supplier is registered in China, the world's largest producer of synthetic cooling agents and a global exporter of menthol-derived specialty chemicals.

The WS-series compounds listed by the supplier belong to the family of N-substituted p-menthane-3-carboxamides, a class developed as longer-lasting and higher-intensity alternatives to natural l-menthol. Listed products with HS code 2932.99 fall under the international Harmonized System chapter for heterocyclic compounds containing an unfused pyran ring, the heading that also covers most other synthetic flavour and fragrance molecules. Buyers sourcing cooling agents for toothpaste typically look at grades differentiated by cooling intensity (WS-23 is generally regarded as the strongest, followed by WS-3, WS-5 and WS-12), residual taste profile and suitability for either cosmetic or food-contact use. The supplier's mix of oral-care and food-additive listings aligns with the two principal end-use segments that drive global demand for these specialty chemicals.

Product Range and Specialties of Taima Food Ws23 Cooling Agent Co., Ltd.

Taima Food Ws23 Cooling Agent Co., Ltd. lists 5 active products across two related categories, Chemicals & Allied Products and Food Additives, all of which are synthetic cooling agents in powder form. The catalogue includes WS-5 (N-Ethyl-p-menthane-3-carboxamide), WS-12 (N-Ethyl-p-menthane-3-carboxamide, formula C13H25NO), WS-3, WS-23 and a food-additive grade of WS-12, with HS code 2932.99 assigned to the WS-5 and WS-12 toothpaste grades. Synthetic cooling agents in this family are typically supplied as white to off-white crystalline powders with assays of 98.0-99.5% by HPLC, melting points in the 55-95 °C range depending on the specific WS compound, and residual solvent levels controlled to ICH Q3C limits for food and oral-care applications.

Buyers in this segment typically compare grades on three parameters: cooling intensity on a 1-100 relative scale (WS-23 is the most intense, WS-3 and WS-12 are mid-range, WS-5 is moderate with a smoother profile), onset and duration of cooling sensation (commonly 5-30 minutes depending on dose and matrix), and absence of bitterness or burning at typical use levels of 50-500 ppm in toothpaste and 10-100 ppm in food and beverage applications. The WS-series compounds are commonly used alongside or in place of natural l-menthol (CAS 2216-51-5) in sugar-free gum, mint confectionery, toothpaste, mouthwash, topical analgesics and e-liquid flavour systems. Standard packaging in this category is 1 kg, 5 kg, 10 kg and 25 kg aluminium-foil or fibre drums, with 20 ft container loads of roughly 8-12 metric tons depending on pack size.

Trade and Export Information - Taima Food Ws23 Cooling Agent Co., Ltd.

Synthetic cooling agents under HS code 2932.99 are a globally traded specialty chemical, with China supplying a large share of world production alongside producers in India, Germany, Japan and the United States. Major importing regions for WS-series compounds include the European Union (especially Germany, France and the Netherlands for flavour houses), the United States (oral-care and confectionery manufacturers), Southeast Asia (Indonesia, Thailand and Vietnam for oral-care and chewing-gum production), the Middle East and North Africa (oral-care contract manufacturers), and increasingly Africa and Latin America as toothpaste and confectionery manufacturing capacity expands in those regions. China's export footprint in this category is supported by an integrated menthol and terpene chemical industry, with many producers located in Shandong, Jiangsu, Zhejiang and Hubei provinces.

For food-additive grade material, buyers in regulated markets typically require compliance with FCC (Food Chemicals Codex) monographs, EU Regulation 1334/2008 for flavouring substances, US 21 CFR for food additives, and JECFA evaluations where applicable, while toothpaste-grade material is generally supplied under cosmetic or personal-care regulatory frameworks such as EU Regulation 1223/2009. Common documentation requested in this trade includes a Certificate of Analysis (COA) with HPLC assay and impurity profile, a Material Safety Data Sheet (SDS), residual solvent statements, heavy-metal test reports, allergen declarations and, for food grades, a non-GMO and sometimes halal or kosher statement. Shipments are usually moved on Incoterms FOB or CIF in 20 ft containers, with cool-chain handling rarely required for these stable crystalline powders but moisture-controlled packaging standard. Inspection and pre-shipment verification by SGS, Intertek or Bureau Veritas is common for first-time buyers.

Sourcing from Taima Food Ws23 Cooling Agent Co., Ltd. - Buyer Guidance

Buyers evaluating Taima Food Ws23 Cooling Agent Co., Ltd. should request a full Certificate of Analysis for the specific WS compound and grade they intend to purchase, confirming HPLC assay (typically reported as 98.0-99.5%), melting point, loss on drying, residue on ignition and heavy-metal content against the relevant pharmacopoeial or FCC limits. For toothpaste applications, buyers should confirm whether the grade is intended for cosmetic/oral-care use and request an SDS aligned with GHS classification, while for food-additive applications confirmation of FCC or equivalent food-grade compliance, plus allergen and GMO statements, should be obtained before order placement. A 100 g to 1 kg pre-shipment sample for in-house sensory and stability testing is standard practice in this category and is the most reliable way to compare cooling intensity, duration and off-note profile against an incumbent supplier. Lead times for WS-series cooling agents from Chinese producers typically run 7-15 days for stock grades and 20-40 days for custom assay or particle-size specifications, with minimum order quantities commonly starting at 1 kg for samples, 25 kg for trial orders and 100-500 kg for commercial runs. Buyers should also clarify packaging format (aluminium-foil bag inside fibre drum is the industry norm), storage conditions (cool, dry, below 25 °C), shelf life (typically 24 months sealed), and whether the supplier can provide regulatory support documents for the destination market, as these compounds are subject to country-specific positive-list requirements for both food and cosmetic use.

What products does Taima Food Ws23 Cooling Agent Co., Ltd. supply?

The supplier lists 5 active products, all synthetic cooling agents in powder form under the WS series, including WS-3, WS-5, WS-12 and WS-23 grades marketed for toothpaste use, plus a food-additive grade of WS-12. The WS-5 and WS-12 toothpaste grades are classified under HS code 2932.99, the heading for heterocyclic flavour and fragrance compounds.

Which WS cooling agent is the strongest?

In this product family, WS-23 is generally regarded as the highest-intensity cooling compound, followed by WS-3 and WS-12 in the mid-range, with WS-5 producing a smoother, more moderate cooling profile. Actual performance depends on dose, matrix and the presence of other flavour ingredients.

What documents should I request before ordering?

Buyers should request a Certificate of Analysis with HPLC assay, an SDS aligned with GHS, residual solvent and heavy-metal test reports, and, for food-additive grades, FCC or equivalent food-grade compliance plus allergen and GMO declarations. For oral-care grades, confirmation of cosmetic or personal-care regulatory compliance for the destination market is advisable.

What is the typical minimum order quantity?

Sample quantities of 100 g to 1 kg are commonly available for sensory and stability trials, with trial orders starting around 25 kg and commercial minimum order quantities typically in the 100-500 kg range. Buyers should confirm the specific MOQ for the WS grade and packaging format they require.

What is the typical lead time?

Stock grades of WS-series cooling agents from Chinese producers are usually dispatched within 7-15 days, while custom assay, particle-size or packaging specifications typically require 20-40 days. Sea-freight transit from China to most major ports adds a further 15-35 days depending on destination.

How are WS cooling agents packaged and shipped?

Industry-standard packaging is 1 kg, 5 kg, 10 kg or 25 kg aluminium-foil bags inside fibre drums, with 20 ft container loads of roughly 8-12 metric tons depending on pack size. These are stable crystalline powders that do not require temperature-controlled shipping, though moisture-controlled handling is standard.

Which regions typically import WS-series cooling agents from China?

Major importing regions include the European Union, the United States, Southeast Asia (Indonesia, Thailand, Vietnam), the Middle East and North Africa, and growing markets in Latin America and Africa, driven by oral-care, confectionery and chewing-gum manufacturing. China is one of the world's principal producers of menthol-derived specialty cooling chemicals.

Are these cooling agents suitable for both food and toothpaste use?

The WS-series compounds can be used in both segments, but food-additive and oral-care grades are typically produced under different regulatory and quality frameworks. Buyers should specify the end use at enquiry stage so the supplier can confirm whether the offered grade meets FCC, EU Regulation 1334/2008, or cosmetic regulations such as EU 1223/2009 as applicable.