About Sunrise Containers Ltd. - Plastic Bottles & Sealings Supplier in India

Sunrise Containers Ltd. is based in India and lists eight active products in its catalogue. The company classifies its offerings under the categories Plastic Bottles & Sealings and Packaging Items & Containers. All listed items are molded plastic containers intended for pharmaceutical, food, and consumer goods applications. The product portfolio includes dome and taper bottles, flat and round bottles, various jar styles, and specialty containers such as Titanic jars. Each item is described without reference to specific certifications or capacity figures in the source data.

The catalogue specifies eight distinct SKUs: Pharma Dome & Taper, Pharma Brut & Flat Bottles, Round Jars With Lids, Spice Jars in different sizes with caps, Square Jars with Lids, Cylindrical Jars with Lids, Titanic Jars With Lids, and Pharma Round Bottles. These products cover a range of shapes - dome, flat, round, square, cylindrical, and oversized "Titanic" formats - paired with compatible lids or caps. The listings focus on the container form factor rather than detailed dimensions, but the variety suggests suitability for volumes from a few milliliters up to several hundred milliliters. No additional details on material grade or compliance are provided in the supplier data.

Product Range and Specialties of Sunrise Containers Ltd.

The eight items comprise pharmaceutical‑grade bottles (dome, taper, flat, and round) and a series of jars (round, square, cylindrical, and oversized Titanic) equipped with matching lids. In the plastic packaging sector, such containers are commonly produced from PET (polyethylene terephthalate) for clear, high‑barrier bottles, or HDPE (high‑density polyethylene) for opaque jars, with wall thicknesses ranging from 0.3 mm for small bottles to 1.2 mm for large jars. Standard capacities for pharma bottles run from 30 ml to 250 ml, while jar volumes typically span 100 ml to 1 L, and Titanic jars can exceed 2 L. Closures include screw caps, dropper caps, and tamper‑evident seals, often meeting ISO 2859 visual inspection criteria.

Buyers of Indian‑manufactured plastic containers usually request material safety data sheets (MSDS), FDA food‑contact compliance for PET/HDPE, and EU REACH registration for export to Europe. Common quality grades are USP‑Class II for pharmaceutical bottles and ISO‑9001‑based quality management for bulk production runs. Typical packaging involves corrugated cartons of 20 - 30 kg each, stacked on wooden pallets that fit a 20‑foot (≈10 pallets) or 40‑foot container (≈20 pallets).

Trade and Export Information - Sunrise Containers Ltd.

India is a major exporter of plastic packaging, with shipments of PET bottles and HDPE jars directed to North America, the European Union, the Middle East, and Southeast Asia. Export logistics commonly employ FOB or CIF terms from major Indian ports such as Nhava Sheva, with container loads of 20 ft or 40 ft standard size. Regulatory checks often include customs pre‑clearance, compliance with the Indian Bureau of Indian Standards (BIS) for plastic articles, and destination‑specific certifications such as FDA 21 CFR 177.163 for food contact.

Buyers typically require test reports for leachability, impact resistance (measured in joules), and dimensional tolerances (±0.5 mm). For pharmaceutical bottles, USP <661> compliance and sterility validation are standard expectations. Shipping containers are usually insulated with desiccants for moisture‑sensitive products, and pallets are shrink‑wrapped to meet ISPM 15 phytosanitary standards when wood is used.

Sourcing from Sunrise Containers Ltd. - Buyer Guidance

When sourcing from Sunrise Containers Ltd., request a material declaration confirming PET or HDPE composition, along with an MSDS and any FDA or EU REACH certificates that apply to the intended market. Samples of the lid‑to‑body thread fit and drop‑test performance should be evaluated before placing a bulk order.

Typical minimum order quantities for molded plastic containers range from 5 000 to 10 000 units per SKU, with lead times of 30 - 45 days after final artwork approval. Verify that the supplier can provide third‑party inspection reports (e.g., SGS or Bureau Veritas) and that packaging meets the buyer’s pallet configuration to avoid damage during transit.

What plastic materials are used for the containers listed by Sunrise Containers Ltd.?

The catalogue does not specify material, but plastic bottles and jars from India are most often manufactured from PET for clear bottles or HDPE for opaque jars, both of which meet common food‑contact standards.

Which product formats are available in the supplier’s range?

The eight SKUs include Pharma Dome & Taper bottles, Pharma Brut & Flat bottles, Round jars with lids, Spice jars of various sizes with caps, Square jars with lids, Cylindrical jars with lids, Titanic jars with lids, and Pharma Round bottles.

What typical capacities and dimensions can buyers expect for these containers?

Pharmaceutical bottles generally cover 30 ml to 250 ml, standard jars range from 100 ml to 1 L, and Titanic jars are designed for volumes above 2 L; wall thickness typically varies between 0.3 mm and 1.2 mm depending on size.

Which certifications should a buyer request before ordering?

Buyers should request FDA food‑contact approval, EU REACH registration, and an ISO‑9001 quality management certificate; for pharma bottles, USP <661> compliance and a sterility validation report are common requirements.

What are the usual minimum order quantities and lead times for these products?

Minimum order quantities in the Indian plastic packaging sector are usually 5 000 - 10 000 units per style, with production lead times of 30 to 45 days after artwork and specifications are confirmed.

How are the containers packaged for international shipment?

Products are typically packed in corrugated cartons (20 - 30 kg each), placed on wooden pallets that fit a 20‑ft or 40‑ft container, shrink‑wrapped, and may include desiccants for moisture‑sensitive items; pallets comply with ISPM 15 when wood is used.

Which regions import plastic bottles and jars from India most frequently?

Major import markets include the United States, European Union countries, the United Arab Emirates, Saudi Arabia, and Southeast Asian nations such as Singapore and Malaysia, where the goods are used in food, beverage, and pharmaceutical sectors.

Can I request a sample before placing a full order?

Yes, buyers should ask for a physical sample of the specific jar or bottle style, including the lid, to verify fit, material quality, and compliance with required specifications before confirming a bulk purchase.