About Smk Petrochemicals India Pvt. Ltd. - Lubricants and Tools Supplier in India

Smk Petrochemicals India Pvt. Ltd. is an India-based supplier operating an active catalogue of 8 products concentrated in the lubricants and tools & instruments categories. Its listed range is built around industrial and automotive fluid products, covering rust preventive oil, brake fluid, grease, engine oil, neat cutting oil, refrigeration compressor oils, antistatic coning oil, and gear oil. The product mix reflects the kind of multi-grade petroleum and specialty lubricant portfolio that Indian chemical and petrochemical suppliers typically offer to both domestic manufacturing buyers and overseas distributors. With 8 active listings spanning protective, hydraulic, metalworking, refrigeration and gear applications, the supplier covers several of the main functional segments of the industrial lubricant market from a single source. The supplier is registered in India, one of the largest lubricant manufacturing and consumption bases in Asia, where domestic demand is driven by the automotive aftermarket, heavy engineering, textile processing (where antistatic coning oil is used in yarn winding), and the cold-chain and refrigeration equipment sector. Lubricant exports from India are governed by petroleum product regulations and BIS standards, and Indian lubricant producers commonly serve buyers across South Asia, the Middle East, and Africa. The catalogue's mix of automotive fluids (engine oil, brake fluid, gear oil), industrial maintenance products (grease, rust preventive oil), and process-specific oils (neat cutting oil, refrigeration compressor oils, antistatic coning oil) indicates a portfolio aimed at workshops, OEMs, textile units, and refrigeration service companies rather than a single narrow end-use.

Product Range and Specialties of Smk Petrochemicals India Pvt. Ltd.

The catalogue lists 8 lubricant and specialty oil products across functional categories. Protective and maintenance oils include rust preventive oil, a thin-film or solvent-deposit product typically graded by film thickness (light, medium, heavy) and by indoor or outdoor protection duration, and grease, supplied across lithium, lithium-complex, calcium, and sodium soap bases with NLGI consistency grades from #000 to #3 depending on application. Automotive and drivetrain fluids cover engine oil (typically API SP/SN, ACEA A3/B4 or C2/C3 grades in SAE viscosities such as 5W-30, 10W-40, 15W-40), brake fluid (DOT 3, DOT 4, DOT 5.1 per FMVSS 116 / IS 12064), and gear oil (API GL-4 and GL-5 grades in SAE 75W-90, 80W-90, 85W-140 viscosities). Metalworking and process fluids include neat cutting oil, an undiluted straight mineral or fatty-oil based fluid used in machining of ferrous and non-ferrous metals, typically specified by viscosity (ISO VG 10 to VG 46), flash point, and sulphur or chlorine content for compatibility with different workpiece materials. Refrigeration compressor oils are supplied for use with HFC, HCFC and natural refrigerant systems, with common viscosity grades ISO VG 32, 46 and 68 and compatibility for use with R-134a, R-404A, R-410A and ammonia systems. Antistatic coning oil is a textile process lubricant applied during yarn coning and winding to reduce fibre-to-metal friction and static buildup, typically supplied as an emulsifiable or neat oil with controlled conductivity. Together these 8 listings cover the principal industrial lubricant categories that Indian specialty chemical suppliers typically serve.

Trade and Export Information - Smk Petrochemicals India Pvt. Ltd.

Lubricants exported from India generally fall under HS code 2710 (petroleum oils, other than crude), 3403 (lubricating preparations and preparations for the treatment of textiles, leather or other materials), and 3404 (artificial waxes and prepared waxes), with specific subheadings depending on the product: brake fluid is commonly classified under 3819.00, prepared rubber accelerators under 3812, and specialised textile lubricants including antistatic coning oils under 3403.99. Indian lubricant exporters typically ship to South Asian markets (Sri Lanka, Bangladesh, Nepal), the Middle East (UAE, Saudi Arabia, Oman, Egypt), and African markets (Kenya, Nigeria, Tanzania, South Africa), with growing demand from Southeast Asia and Latin America for cost-competitive industrial and automotive grades. For these product categories, buyers typically require product data sheets showing viscosity at 40°C and 100°C, viscosity index, flash point, pour point, TAN/TBN values, and conformance to standards such as API, ACEA, JASO, IS (Bureau of Indian Standards), and where applicable OEM approvals. Packaging for industrial lubricants is typically supplied in 1 L, 5 L, 20 L, 50 L, 200 L drums, and 1000 L IBC tanks, with export shipments commonly arranged on FOB or CIF basis in 20 ft or 40 ft dry container loads, subject to IMDG classification for any flammable or hazardous items. Indian lubricant exports are supported by DGFT licensing for restricted categories, REACH registration for shipments into the European Union, and SDS (Safety Data Sheet) documentation per GHS for all products, which buyers should request and verify before confirming purchase orders.

Sourcing from Smk Petrochemicals India Pvt. Ltd. - Buyer Guidance

Buyers sourcing from Smk Petrochemicals India Pvt. Ltd. should request the technical data sheet (TDS) and material safety data sheet (MSDS) for each specific product, with viscosity, flash point, pour point, and applicable industry standard conformance (API, ACEA, IS, NLGI, DOT) clearly stated. For engine oil, gear oil and brake fluid, lot-wise test reports covering viscosity index, TBN, water content and foaming characteristics should be requested, along with confirmation of any OEM approvals the buyer requires. For neat cutting oil and antistatic coning oil, buyers should ask for application-specific parameters such as sulphur content, emulsion stability, and conductivity values relevant to their machining or textile process. Before placing a recurring order, it is advisable to request free samples for in-house evaluation against the buyer's own performance criteria, and to confirm the supplier's production capacity, lead time, and ability to supply private-label or custom-formulated grades if needed. Packaging compatibility (new steel drums versus reconditioned), batch traceability, and shelf-life declarations are standard verification points for lubricant procurement. Documentation typically required at the time of shipment includes a commercial invoice, packing list, certificate of origin (preferential or non-preferential depending on the destination), MSDS in the destination country's language, and for certain markets a certificate of analysis (COA) per lot. Confirming these documents and specifications in writing prior to order confirmation reduces the risk of grade or regulatory non-conformance at the receiving end.

What product categories does Smk Petrochemicals India Pvt. Ltd. supply?

The supplier lists 8 active products across lubricants and tools & instruments, including rust preventive oil, brake fluid, grease, engine oil, neat cutting oil, refrigeration compressor oils, antistatic coning oil, and gear oil. The range covers automotive, industrial maintenance, metalworking, refrigeration, and textile process lubrication segments.

Which industry standards should I request for the engine oil and gear oil?

Buyers of engine oil typically request API SP, SN Plus or older API grades, ACEA A3/B4 or C2/C3, and SAE viscosity grades such as 5W-30, 10W-40 or 15W-40. For gear oil, API GL-4 and GL-5 with SAE 75W-90, 80W-90 or 85W-140 are the most common specifications to confirm in writing.

What brake fluid grades are commonly available from Indian lubricant suppliers?

Brake fluid is typically offered in DOT 3, DOT 4 and DOT 5.1 grades conforming to FMVSS 116 and IS 12064, with wet and dry boiling point values stated on the technical data sheet. Buyers should request the latest COA confirming boiling point and pH for the supplied lot.

Which HS codes apply to the products in this catalogue?

Lubricating oils and greases are generally classified under HS 2710 and 3403, brake fluid under HS 3819.00, and specialised textile process oils such as antistatic coning oil under HS 3403.99. Buyers should confirm the exact 6-digit HS code with the supplier based on the specific product and formulation at the time of enquiry.

What is the typical packaging for industrial lubricants exported from India?

Industrial lubricants are commonly packed in 1 L, 5 L, 20 L, 50 L and 200 L drums, and 1000 L IBC tanks for bulk shipments. Export consignments are typically loaded in 20 ft or 40 ft dry containers on FOB or CIF terms, with palletisation or shrink-wrapping as per the buyer's requirement.

Which documents should I request before confirming a purchase order?

Request the technical data sheet, MSDS per GHS, certificate of analysis for the offered lot, and a sample for in-house testing. For export shipments, also confirm the commercial invoice, packing list, certificate of origin, and any REACH or destination-country regulatory documentation required for lubricants.

What is the typical application for antistatic coning oil?

Antistatic coning oil is a textile process lubricant applied during yarn winding and coning to reduce fibre-to-metal friction and control static buildup. Buyers in spinning and yarn processing units typically specify conductivity, emulsion stability, and compatibility with the specific yarn count being processed.

What is the typical lead time and MOQ for lubricant export orders from India?

Lead time depends on whether the grade is a standard formulation or a custom blend, with standard grades typically dispatched within 7 to 15 days of confirmed order and custom grades requiring 21 to 45 days. Minimum order quantities vary by product and packaging, with bulk drum and IBC orders generally starting at one pallet or 20 to 50 drum lots, which should be confirmed directly with the supplier at the time of enquiry.