About skylinepolymers - Recycled Plastic Supplier in Egypt

skylinepolymers is based in Cairo, Egypt and currently lists ten active products in its catalogue. All items are recycled plastics and are recorded under HS chapter 30, heading 0306, which covers plastic waste and scrap. The product set includes various granules and pellets derived from polypropylene, ABS, HIPS and HDPE polymers. Each entry specifies the material as "recycle plastics" and is grouped by polymer type rather than by color or grade. The catalogue does not provide additional manufacturing or capacity data beyond the product titles and HS codes.

The catalogue details Natural PP granules, Recycled Colored PP, Recycled GPPS granules and pellets, ABS recycled granules and pellets, Recycled HIPS granules, and Recycled HDPE granules and pellets. All ten listings share the same HS code 0306, reflecting their classification as recycled plastic material. The product names indicate both granule and pellet forms, suggesting bulk handling suitable for re‑processing. No further specifications such as melt flow index or color values are disclosed in the supplied facts.

Product Range and Specialties of skylinepolymers

The listed recycled plastic items correspond to common grades used in secondary molding and extrusion. Recycled PP granules typically target a melt flow index (MFI) between 2 and 10 g/10 min and a moisture content below 0.2 %. GPPS (General Purpose Polystyrene) pellets are valued for high clarity and usually meet an MFI of 1 - 5 g/10 min with ash content under 0.5 %. Recycled ABS granules are assessed for impact resistance and often have an MFI of 3 - 8 g/10 min, while HIPS granules are checked for stiffness and an MFI of 2 - 6 g/10 min. HDPE granules and pellets normally exhibit a density of 0.94 - 0.96 g/cm³ and an MFI of 0.5 - 5 g/10 min. Buyers generally request compliance with ISO 9001 quality management, REACH chemical safety, and material safety data sheets for each polymer type.

Trade and Export Information - skylinepolymers

Egypt has become a notable source of post‑consumer and post‑industrial plastic waste for export, with recycled plastics from the region commonly shipped to the European Union, the United States, GCC countries and Southeast Asian manufacturers. All skylinepolymers products fall under HS code 0306, which customs authorities use to assess duties and require accompanying documentation such as a commercial invoice, packing list and, where applicable, a REACH compliance statement. Typical export logistics involve bulk packaging in polypropylene bulk bags (≈1 tonne per bag) loaded into 20‑ft containers (≈18 - 20 tonnes) or 40‑ft containers (≈38 tonnes). Common Incoterms are FOB Cairo Port or CIF Dubai, reflecting standard trade practices for bulk polymer shipments. Inspection agencies often perform pre‑shipment checks to verify weight, moisture content and contamination levels before the goods cross the border.

Sourcing from skylinepolymers - Buyer Guidance

When sourcing recycled plastics from skylinepolymers, buyers should request a recent melt flow index test report, ash and moisture analysis, and a material safety data sheet for each polymer grade. Samples of 5 - 10 kg are sufficient for laboratory verification of color consistency (L*a*b* values) and mechanical properties. Confirm that the supplier can provide evidence of ISO 9001 or REACH compliance, even though such certifications are not listed in the public data. Standard minimum order quantities are around 500 kg per product, with a typical lead time of 4 - 6 weeks after order confirmation and receipt of required test documentation.

What recycled plastic products does skylinepolymers offer?

The catalogue lists ten items, including Natural PP granules, Recycled Colored PP, GPPS granules and pellets, ABS granules and pellets, HIPS granules, and HDPE granules and pellets, all classified under HS code 0306.

Which HS code applies to these products?

All listed recycled plastic items fall under HS Chapter 30, heading 0306, which covers plastic waste, scrap and other plastic articles.

Are there typical certifications buyers should ask for?

Buyers usually request ISO 9001 quality management certificates, REACH compliance documentation, and material safety data sheets for recycled plastics; skylinepolymers does not list specific certifications in its public data.

What specifications are commonly checked for recycled PP granules?

Common checks include melt flow index (typically 2 - 10 g/10 min), color consistency measured by L*a*b* values, ash content below 0.5 %, and moisture content under 0.2 %.

What are the usual packaging and container sizes for these granules?

Bulk shipments are typically packed in polypropylene bulk bags (≈1 tonne each) and consolidated into 20‑ft containers with a net weight of 18 - 20 tonnes, or 40‑ft containers up to 38 tonnes.

What are typical minimum order quantities and lead times?

Standard MOQ is around 500 kg per product, with a typical production and preparation lead time of 4 - 6 weeks after order confirmation and receipt of required test reports.

Which markets commonly import recycled plastics from Egypt?

Major import regions include the European Union, the United States, the Gulf Cooperation Council countries, and Southeast Asian manufacturers of packaging and automotive components.

How can a buyer verify the material quality before a full order?

Buyers can request a small sample (5 - 10 kg) together with a recent melt flow index test report, ash and moisture analysis, and a compliance certificate; third‑party inspection agencies can also be engaged for pre‑shipment verification.