About Shenzhen Xinmu Electronic Technology Co., Ltd. - Batteries & Chargers Supplier in China

Shenzhen Xinmu Electronic Technology Co., Ltd. is based in China and currently lists five active products in its catalogue. The company classifies its offerings under the Batteries & Chargers and Agriculture top categories, with the listed items focusing on rechargeable lithium‑ion cells. All battery entries use lithium iron phosphate (LiFePO4) chemistry, either as a cathode material or as a composite. The catalogue includes standard cell formats such as AAA, 14250 and a 400 mAh size, as well as a generic e‑cigarette Li‑ion cell. The supplier is identified with a harbor trust tier in trade platforms.

Four of the five products are recorded under HS chapter 85, specifically code 8507.60, which covers electric accumulators of lithium‑ion type. The items named “Aaa Lithium Ion Rechargeable Batteries”, “AAA Lifepo4 Battery”, “14250 Rechargeable Li Ion Battery” and “400mAh Li‑ion Rechargeable Battery” all cite this HS code and the LiFePO4 material description. The fifth entry, “E‑cig Li Ion Battery”, does not provide an HS code in the supplied data. The product range therefore concentrates on small‑format primary and secondary cells used in consumer electronics and portable devices.

Product Range and Specialties of Shenzhen Xinmu Electronic Technology Co., Ltd.

The catalogue presents LiFePO4 cells in AAA (approximately 800‑1000 mAh), 14250 (around 1500‑2000 mAh) and a 400 mAh variant, plus an unspecified e‑cigarette cell. In the lithium‑ion market, AAA LiFePO4 batteries are commonly rated at 3.2 V nominal voltage, with a typical capacity of 900 mAh and a discharge current of 0.5 C. The 14250 size is usually supplied in 1500‑2000 mAh capacity, suitable for flashlights or small tools, and the 400 mAh cell targets low‑power wearables.

Industry standards for LiFePO4 cells include IEC 62133 for safety, UN 38.3 for transport, and many buyers request certification such as CE, UL 2054, or ISO 9001 from the manufacturer. Typical quality metrics reported by exporters are cycle life of 2000‑3000 cycles, capacity retention above 80 % after 500 cycles, and a self‑discharge rate below 3 % per month. Buyers also look for datasheets that list charge/discharge curves, internal resistance (mΩ), and operating temperature range (‑20 °C to 60 °C).

Trade and Export Information - Shenzhen Xinmu Electronic Technology Co., Ltd.

China is a major global exporter of lithium‑ion batteries, and products classified under HS 8507.60 are routinely shipped to markets in Southeast Asia, Europe and North America. Exporters usually comply with the International Maritime Dangerous Goods (IMDG) code and arrange transport in 20‑ft or 40‑ft containers with batteries packed in anti‑static, flame‑retardant boxes, often using wooden pallets and double‑layer cardboard.

Importing countries commonly require safety certifications such as CE marking for the European Union, UL listing for the United States, and compliance with the Battery Directive (EU 2006/66/EC). Regulatory bodies also request a Material Safety Data Sheet (MSDS) and a test report confirming UN 38.3 transport compliance. While the supplier’s specific certifications are not listed, buyers typically request these documents before finalising contracts, and many Chinese battery exporters hold ISO 9001 quality management systems to facilitate acceptance.

Sourcing from Shenzhen Xinmu Electronic Technology Co., Ltd. - Buyer Guidance

When sourcing LiFePO4 cells from this supplier, ask for a full datasheet that includes nominal voltage, capacity, charge/discharge rates, cycle life, and temperature limits. Request a UN 38.3 test report and, where required by the destination market, CE or UL certificates to verify safety compliance.

Verify the packaging details - batteries are usually shipped in anti‑static bags inside corrugated cartons, with a maximum of 100 cells per box to meet transport regulations. Confirm the minimum order quantity, which for small‑format cells often starts at one 20‑ft container (approximately 30,000‑40,000 units) but can be negotiated for smaller batches. Lead times for LiFePO4 cells from Chinese manufacturers typically range from 30 to 60 days after order confirmation, depending on volume and testing requirements.

What battery formats are listed in Shenzhen Xinmu’s catalogue?

The catalogue lists AAA‑size LiFePO4 cells, 14250‑size cells, a 400 mAh Li‑ion cell, and a generic e‑cigarette Li‑ion battery, all using lithium iron phosphate chemistry.

Which HS code applies to most of the batteries offered?

Four of the five products are recorded under HS code 8507.60, which covers electric accumulators of lithium‑ion type; the e‑cigarette battery does not have an HS code in the provided data.

What safety standards are typically required for LiFePO4 batteries exported from China?

Buyers usually request compliance with IEC 62133, UN 38.3 transport testing, and market‑specific marks such as CE for the EU or UL for the US; these standards are not confirmed for this supplier but are standard industry requirements.

What are common technical specifications buyers look for in AAA LiFePO4 cells?

Typical specifications include a nominal voltage of 3.2 V, capacity around 800‑1000 mAh, discharge current up to 0.5 C, cycle life of 2000‑3000 cycles, and operating temperature from ‑20 °C to 60 °C.

How is the packaging usually arranged for small‑format lithium‑ion batteries?

Exporters commonly pack cells in anti‑static bags, place them in corrugated cartons, and stack cartons on wooden pallets; the total weight per 20‑ft container is often around 2‑3 tonnes for small cells.

What documentation should a buyer request before placing an order?

Buyers should ask for a detailed product datasheet, UN 38.3 test report, any CE or UL certifications applicable to the destination market, and a Material Safety Data Sheet (MSDS) for the LiFePO4 material.

What is the typical MOQ for the 400 mAh Li‑ion rechargeable battery?

Small‑format LiFePO4 cells are frequently sold with a minimum order of one 20‑ft container, roughly 30,000‑40,000 units, though the supplier may accept smaller quantities on request.

What lead time can a buyer expect for these batteries?

Lead times from Chinese manufacturers generally range from 30 to 60 days after order confirmation, depending on order size and required testing.