About Shenzhen Jianchen Industrial Co., Ltd. - Vinyl Floorings Supplier in China

Shenzhen, China hosts Shenzhen Jianchen Industrial Co., Ltd., which currently lists five active flooring products. The catalogue is organised under the top categories Vinyl Floorings, PVC Floorings and Blocks, Tiles & Slabs, reflecting a focus on resilient floor coverings used in residential and commercial interiors.

The product list includes Bonie vinyl plank, Bonie luxury flooring, Bonie homogeneous PVC floor, Bonie vinyl tile and Bonie heterogeneous PVC floor. The Bonie vinyl tile is recorded with HS code 3918.10 and is described as a PVC multi‑layer composite reinforced with glass fibre, aligning it with standard classifications for vinyl tiles in international trade.

Product Range and Specialties of Shenzhen Jianchen Industrial Co., Ltd.

The supplier’s catalogue offers a mix of vinyl and PVC flooring formats: planks, luxury sheets, homogeneous and heterogeneous boards, and a tile product with a specific HS code. In the wider industry, vinyl flooring is commonly produced as luxury vinyl tiles (LVT) or stone‑plastic composites (SPC) with wear‑layer thicknesses ranging from 0.2 mm to 0.6 mm and overall thicknesses between 2 mm and 8 mm. Homogeneous PVC floorings are typically fully polymer‑based, while heterogeneous versions combine a wear layer with a backing layer to improve dimensional stability.

Typical quality grades for these products are defined by standards such as EN 14041 for vinyl flooring, ASTM F1700 for PVC floorboards and ISO 9002 for manufacturing processes. Buyers frequently specify fire‑class ratings (e.g., Class B according to EN 13501‑1), slip‑resistance values (R‑value 35 - 45), and VOC emissions below 0.5 mg m‑3 to meet indoor‑air‑quality regulations.

Trade and Export Information - Shenzhen Jianchen Industrial Co., Ltd.

China is a leading exporter of resilient flooring, with shipments of vinyl and PVC floorings regularly directed to the United States, European Union, Middle East and Southeast Asian markets. The HS‑code family 3918 covers plastic tiles and flooring, and the specific 3918.10 code used for the Bonie vinyl tile is standard for PVC tiles reinforced with glass fibre, facilitating customs clearance under the usual tariff rates for this chapter.

Importers of vinyl flooring typically require CE marking, ISO 9001 quality‑system certification and compliance with fire‑safety standards such as EN 13501‑1. Goods are usually packed on Euro‑pallets, placed in 20‑ft or 40‑ft containers, and shipped under Incoterms like FOB Shenzhen or CIF destination port. Chinese exporters often provide pre‑shipment inspection reports and material safety data sheets to satisfy buyer due‑diligence processes.

Sourcing from Shenzhen Jianchen Industrial Co., Ltd. - Buyer Guidance

When sourcing from this supplier, buyers should obtain a detailed product data sheet that lists thickness, wear‑layer composition, fire‑rating class and VOC emission levels. Requesting test reports for slip resistance (ASTM C1028), wear resistance (DIN 53837) and fire performance (EN 13501‑1) helps verify that the flooring meets target market regulations.

Samples of the Bonie vinyl tile and other floorings are usually supplied in standard 0.5 m × 0.5 m sections, allowing evaluation of surface texture and colour consistency. Typical minimum order quantities range from one full 20‑ft container (approximately 1,000 m² of 6 mm thick tile) to larger volumes for bulk projects, with lead times of 30 - 45 days after order confirmation, subject to factory scheduling and shipping arrangements.

What HS code is assigned to the Bonie vinyl tile?

The Bonie vinyl tile is classified under HS code 3918.10, which covers vinyl tiles made of plastics such as PVC and includes glass‑fiber reinforcement.

Which certifications are commonly required for vinyl and PVC flooring imports?

Importers generally request CE marking, ISO 9001 quality‑system certification and fire‑rating certificates such as EN 13501‑1. Additional test reports for slip resistance and VOC emissions are also standard.

What typical thickness and wear‑layer specifications apply to the listed products?

Vinyl planks and tiles in this segment are often 2 mm to 8 mm thick, with wear‑layer thicknesses between 0.2 mm and 0.6 mm. Homogeneous PVC floors are usually solid throughout, while heterogeneous boards combine a thinner wear layer with a backing layer.

How are the flooring products usually packaged for export?

Products are commonly stacked on Euro‑pallets, shrink‑wrapped, and loaded into 20‑ft or 40‑ft containers. Tile packs may be placed in cardboard cartons of 0.5 m × 0.5 m sections for easier handling.

What documentation should a buyer request before placing an order?

Buyers should ask for a product data sheet, material safety data sheet, fire‑rating test report, slip‑resistance test results and any relevant CE or ISO certificates. Pre‑shipment inspection reports are also advisable.

What are typical minimum order quantities and lead times for these flooring products?

Minimum orders often start at one full 20‑ft container, roughly 1,000 m² of 6 mm tile, with lead times of 30 to 45 days after order confirmation, depending on production scheduling and shipping terms.