About Shenzhen Fushiyuan Rubber& Plastic Factory - Rubber Items Supplier in China

Shenzhen, China is the base of Shenzhen Fushiyuan Rubber& Plastic Factory, which currently lists five active rubber‑based products. The supplier is classified as an imported tier with a harbor trust tier, and its primary catalogue category is Rubber Items. The product portfolio includes a rubber bumper, rubber gasket or seal gasket, rubber grommet, a rubber‑with‑metal hybrid item, and adhesive rubber feet. Each entry is recorded under the generic HS chapter 40 that covers rubber and plastic articles. The factory’s catalogue focuses on components commonly used in automotive, machinery and consumer‑goods applications.

The listed items correspond to typical HS code families such as HS 4016 for other vulcanised rubber articles (e.g., bumpers and grommets) and HS 4017 for tubes or hoses where applicable, while rubber gaskets often fall under HS 4015. These products are manufactured from standard rubber compounds including natural rubber (NR), styrene‑butadiene rubber (SBR) and ethylene‑propylene‑diene monomer (EPDM). The adhesive rubber feet are supplied as self‑adhesive pads designed for vibration damping. The metal‑integrated rubber component combines a steel or aluminum core with a surrounding rubber layer for reinforced sealing. All five products are presented without specific certifications in the provided data.

Product Range and Specialties of Shenzhen Fushiyuan Rubber& Plastic Factory

The factory’s catalogue enumerates a rubber bumper, a rubber gasket/seal, a rubber grommet, a rubber‑with‑metal assembly and adhesive rubber feet. Rubber bumpers are typically produced in durometer ranges of Shore A 30 to 80, with dimensions tailored to the mounting surface, and are often supplied in blocks or pre‑cut shapes. Gaskets and seal gaskets are commonly formulated from NBR for oil resistance or EPDM for weather resistance, conforming to ISO 3601 dimensions and compression‑set limits below 20 % after 24 h at 70 °C. Rubber grommets serve as strain‑relief inserts and are usually sized from 2 mm to 20 mm inner diameter, with wall thicknesses matching the host material. The metal‑integrated rubber product integrates a steel or aluminum core encapsulated by a rubber layer, a configuration used for reinforced seals. Adhesive rubber feet are offered as self‑adhesive pads with durometer 40‑60 Shore A and adhesive backing suitable for metal or plastic substrates.

In the broader rubber components market, buyers often specify grades such as EPDM 70 (ISO 1629) for high ozone and heat resistance, or NBR 50 for fuel‑oil environments. Compliance with ISO 9001 quality management and REACH chemical safety registration is frequently required for export destinations. For automotive applications, UL 94 flammability ratings and ASTM D2000 material classifications are standard references. Typical packaging includes bulk cartons or wooden crates, with each crate loaded on a 20‑foot or 40‑foot container depending on volume.

Trade and Export Information - Shenzhen Fushiyuan Rubber& Plastic Factory

China ranks among the world’s largest exporters of vulcanised rubber components, and Shenzhen’s logistics hub provides direct access to maritime routes for containerised shipments. Rubber items such as bumpers, gaskets and grommets from this region are routinely shipped to automotive manufacturers in Europe, machinery assemblers in North America, and consumer‑goods producers in Southeast Asia. The products fall under HS chapter 40, with specific sub‑headings HS 4016 (other rubber articles) and HS 4015 (gaskets), which are subject to standard customs valuation and inspection procedures in the destination country.

Importers typically request certificates of compliance such as ISO 9001, ISO 14001, REACH registration and, where applicable, UL or ASTM test reports for hardness, tensile strength and compression set. Packing standards often involve moisture‑resistant poly‑bagging inside wooden pallets, with container loading plans that respect the weight limits of 20‑ton 20‑foot containers or 28‑ton 40‑foot containers. Common Incoterms used by Chinese rubber component exporters include FOB Shenzhen Port and CIF destination, allowing buyers to arrange onward transport and customs clearance.

Sourcing from Shenzhen Fushiyuan Rubber& Plastic Factory - Buyer Guidance

Prospective buyers should request the material data sheet that details the rubber compound, durometer (Shore A), temperature range, tensile strength (MPa) and compression‑set values. Asking for ISO 9001 and REACH certificates, as well as any third‑party test reports (e.g., ASTM D2240 for hardness, ASTM D395 for compression set), helps verify that the items meet industry standards. Samples of at least five units per product type are advisable to assess fit, finish and performance before confirming larger orders.

Typical minimum order quantities for these rubber components range from 500 to 1 000 pieces per SKU, with lead times of 30‑45 days from order confirmation to shipment. Verify that packaging meets the buyer’s freight requirements, such as double‑wall cartons or wooden crates, and confirm the Incoterm (FOB Shenzhen or CIF) to align responsibilities. Conduct a pre‑shipment inspection or request a third‑party quality audit if the buyer’s market mandates it.

What rubber products does Shenzhen Fushiyuan Rubber& Plastic Factory offer?

The catalogue lists five rubber items - a rubber bumper, a rubber gasket/seal gasket, a rubber grommet, a rubber‑with‑metal product and adhesive rubber feet - all classified under the Rubber Items category.

Which HS codes are applicable to the listed products?

The items generally fall under HS chapter 40; rubber bumpers and grommets use HS 4016 (other vulcanised rubber articles), while rubber gaskets are commonly coded under HS 4015 (gaskets).

What material specifications should buyers verify?

Buyers should check the rubber compound (e.g., NBR, EPDM, SBR), durometer (Shore A 30‑80), temperature resistance range, tensile strength in MPa and compression‑set percentage after 24 h at 70 °C.

Which certifications are typically required for these rubber components?

Importers usually require ISO 9001 quality‑management certification, REACH chemical‑safety registration, and, for automotive uses, UL 94 flammability or ASTM D2000 material classification reports.

What are the typical packaging and container options?

Products are packed in moisture‑resistant poly‑bags, placed in double‑wall cartons, and loaded on standard 20‑foot or 40‑foot containers, with total crate weights respecting 20‑ton and 28‑ton limits respectively.

What is the usual minimum order quantity and lead time?

Minimum order quantities are typically 500‑1 000 pieces per SKU, and the standard production lead time ranges from 30 to 45 days after order confirmation.