About Shandong Yingzhi Technology Development Co., Ltd. - Power Plant Spares Supplier in China

Shandong Yingzhi Technology Development Co., Ltd. is based in China and currently lists five active products in its catalogue. The company’s catalogue is grouped under the categories Power Plant Spares, Power Plants and Heavy Machinery, reflecting a focus on large‑scale energy equipment. The listed items include a Turnkey power plant, Power plant boiler, Boiler and BTG package, BTG boiler and a Circulating Fluidized Bed (CFB) boiler. Each product falls within the machinery and equipment HS chapter 84, which covers boilers, turbines and related plant components. The supplier is classified as an imported tier with a harbor trust tier, indicating that it operates through third‑party logistics for cross‑border shipments.

The Turnkey power plant entry suggests a complete plant solution that integrates generation, steam and power conversion equipment. Boiler‑related entries such as Power plant boiler, Boiler and BTG package, BTG boiler and CFB boiler refer to specific steam‑generation units that are commonly rated in megawatts (MW) and designed to operate at pressures up to 30 MPa or higher. While the catalogue does not provide technical dimensions, buyers can expect typical boiler specifications such as steam temperature 540 °C, water‑wall tube thickness 25 mm and design compliance with ASME Section I or equivalent Chinese standards. The CFB boiler is a subtype that uses a fluidized bed for fuel flexibility and lower emissions, a configuration frequently exported from China to emerging power markets.

Product Range and Specialties of Shandong Yingzhi Technology Development Co., Ltd.

The product list covers complete plant solutions and individual boiler units. Turnkey power plants usually combine a gas turbine or steam turbine, generators, balance‑of‑plant equipment and control systems, often sized from 50 MW to 300 MW for utility‑scale projects. Standard boiler grades for power‑plant boilers are classified by pressure (low, medium, high) and fuel type (coal, gas, biomass), with typical efficiency targets of 85‑90 % and emissions limits that meet local environmental regulations. BTG (Bottoming Turbine‑Generator) packages are designed to recover waste heat from the boiler exhaust, commonly rated at 10‑30 % of the primary turbine output. Circulating Fluidized Bed boilers are valued for their ability to burn low‑grade fuels while maintaining sulfur dioxide emissions below 200 mg/Nm³, and they are often built to meet IEC 62264 and ISO 9001 quality frameworks.

Trade and Export Information - Shandong Yingzhi Technology Development Co., Ltd.

China is a major exporter of power‑generation equipment, and the HS‑84 chapter captures most of the relevant tariff lines, such as 8401 for steam turbines, 8402 for gas turbines, and 8403‑8404 for various boiler types. Export shipments of turnkey plants and boiler modules are typically loaded in 40‑foot containers for smaller units or in open‑top containers and flat‑rack trucks for larger modules, with freight terms frequently quoted as CIF or FOB. Major import regions include Southeast Asia, the Middle East, Africa and South America, where expanding grid capacity drives demand for both new plants and retrofits. Buyers usually request certificates such as ISO 9001, ISO 14001, CE marking for equipment sold within the EU, and compliance documents for the relevant national standards (e.g., GB/T in China). Inspection agencies often perform pre‑shipment verification under the Shanghai Inspection and Quarantine (CIQ) regime, and HS codes in the 84.71‑84.73 range may be subject to anti‑dumping duties in certain jurisdictions.

Sourcing from Shandong Yingzhi Technology Development Co., Ltd. - Buyer Guidance

When sourcing from Shandong Yingzhi Technology Development Co., Ltd., buyers should obtain detailed technical datasheets that list boiler pressure, steam temperature, rated capacity (MW), fuel flexibility and emission control features. Requesting third‑party test reports or factory acceptance test (FAT) certificates helps verify that the equipment meets ASME, IEC or comparable standards. Buyers are advised to confirm the presence of ISO 9001 or ISO 14001 certification, and to ask for CE or other market‑specific conformity certificates before finalizing contracts. Clarify packaging details - whether the boiler modules are crate‑packed, palletized or shipped as oversize cargo - and verify the incoterm to align responsibilities for freight, insurance and customs clearance. Lead times for turnkey plants can range from 12 to 24 months, while individual boiler units may be delivered within 6 to 12 months depending on capacity and customization.

What types of power‑plant equipment does Shandong Yingzhi Technology Development Co., Ltd. list?

The catalogue includes a Turnkey power plant, a standard Power plant boiler, a Boiler and BTG package, a BTG boiler and a Circulating Fluidized Bed (CFB) boiler, all classified under the machinery HS chapter 84.

Which HS codes are relevant for the listed products?

Typical HS codes fall within chapter 84, such as 8401 for steam turbines, 8403 for water‑tube boilers and 8404 for other boiler types, but the exact sub‑heading depends on the specific configuration and capacity.

What certifications are commonly required for these boiler and plant products?

Buyers usually request ISO 9001 quality management, ISO 14001 environmental management, CE marking for EU markets, and compliance with ASME Section I or the Chinese GB/T boiler standards.

How are the boiler units typically packaged for export?

Smaller boiler modules are often crate‑packed or palletized in 40‑ft containers; larger units are shipped as oversize cargo on open‑top containers, flat‑rack trucks or sea‑deck freight, secured with steel strapping.

What are typical lead times for a Turnkey power plant versus an individual boiler?

A Turnkey power plant generally requires 12 - 24 months from order to commissioning, while an individual boiler unit can be manufactured and shipped within 6 - 12 months, depending on capacity and customization.

Which markets most frequently import Chinese power‑plant equipment?

Key import regions include Southeast Asia, the Middle East, Africa and South America, where expanding electricity infrastructure drives demand for boilers, turbines and BTG packages.

What documentation should a buyer request before placing an order?

Buyers should ask for detailed technical datasheets, factory acceptance test reports, third‑party inspection certificates, and any applicable conformity certificates such as CE, ISO 9001 or ASME compliance.

Are there any typical minimum order quantities (MOQs) for these products?

MOQs depend on the equipment size; turnkey projects are inherently large, while individual boiler units may have MOQs ranging from one unit to a small batch, often defined by the manufacturer’s production schedule.