About Samadian Trading Company - Chemicals Supplier in Turkey

Turkey‑based Samadian Trading Company lists sixteen active products that span chemicals, fertilizers, construction materials, stone products and related allied goods. The catalogue includes caustic soda, urea 46, calcium hypochlorite, mineral water, evaporative coolers, pumice, bitumen, cement, limestone powder and ground granulated blast furnace slag, among other items. Each entry is tied to a specific HS‑code family where provided, for example 2815.12 for caustic soda and 2523.29 for hydraulic cement. The supplier’s portfolio therefore covers HS chapters 28 (organic and inorganic chemicals), 25 (mineral products) and 26 (cements and concrete).

The product list shows a focus on high‑purity inorganic chemicals such as sodium hydroxide (98‑99 % purity) and calcium hypochlorite, standard fertilizer grade urea with 46 % nitrogen, and construction‑grade materials like Gabbro granite and natural pumice. Bulk chemicals are typically shipped in 200 L drums or bulk containers, while stone and cement products are offered in bagged or bulk freight formats. The inclusion of mineral water and hand‑washing liquid expands the range into consumer‑grade liquids, each subject to separate food‑grade or hygiene standards.

Product Range and Specialties of Samadian Trading Company

Samadian’s catalogue groups its items into three practical clusters: inorganic chemicals (caustic soda, calcium hypochlorite, urea 46, hand‑washing liquid), construction/mineral products (cement, limestone powder, GGBS, pumice, Gabbro granite, shrink roll) and ancillary goods (mineral water, evaporative coolers, fresh vegetables, crude oil). In the chemical segment, buyers normally expect caustic soda at 98‑99 % purity, low heavy‑metal content and a moisture level below 0.5 %. Urea 46 is the standard nitrogen‑fertiliser grade with 46 % N, low ammonium nitrate impurity and a granule size of 2‑4 mm. Calcium hypochlorite is typically supplied with 65‑70 % available chlorine and a moisture limit of 5 %. For construction minerals, pumice is used as a lightweight aggregate with bulk density 0.5‑0.8 g cm‑3 and silica content above 60 %. Ground granulated blast furnace slag (GGBS) must contain ≥90 % glass phase and is graded for cement replacement rates up to 70 %. Cement variants listed (Type II, Type V, pozzolanic) correspond to ASTM C150 and EN 197 specifications, with compressive strength classes 32.5‑45 MPa.

Trade and Export Information - Samadian Trading Company

Turkey is a major exporter of inorganic chemicals and construction minerals to the EU, Middle‑East and North‑African markets. HS chapter 28 chemicals such as caustic soda (2815) and calcium hypochlorite (2828) generally require REACH registration, an SDS and, where applicable, ISO 9001 quality‑management certification. Mineral products under HS 25 and 26 are often inspected for heavy‑metal limits and compliance with EN 12457 (leaching) before shipment. Typical export logistics involve FOB Istanbul or Izmir ports, with bulk shipments in 20‑ft or 40‑ft containers for chemicals, and open‑top containers or bulk carriers for cement, limestone powder and GGBS. Buyers in the EU frequently request CE‑marked safety data and conformity to EN 14683 for hand‑washing liquids, while the Middle‑East market emphasizes halal‑compatible certifications for food‑grade mineral water.

Sourcing from Samadian Trading Company - Buyer Guidance

When sourcing from Samadian, request a current Material Safety Data Sheet (MSDS) and a Certificate of Analysis (CoA) for each chemical product; these documents should detail purity, moisture, heavy‑metal limits and compliance with REACH or local regulations. For stone and cement products, ask for mill test reports, compressive‑strength certificates (ASTM C150 or EN 197) and, where relevant, a quarry licence or export permit. Verify that the GGBS batch meets the ≥90 % glass‑content specification and that the limestone powder lists CaCO₃ purity (typically >94 %). Samples are usually provided in 5‑kg drums for chemicals, 25‑kg bags for cement and a small slab for stone, allowing buyers to run independent laboratory checks before confirming volume orders.

Which HS codes apply to Samadian Trading Company’s main products?

Caustic soda is classified under HS 2815.12, calcium hypochlorite under 2828.10, pumice under 2513.10 and hydraulic cement under 2523.29. Ground granulated blast furnace slag uses HS 2618.00. Other items follow the standard HS chapters for chemicals (28), mineral products (25) and construction materials (26).

What purity level should I expect for the caustic soda supplied?

The listed material is sodium hydroxide with a purity of 98‑99 % by weight. Buyers typically verify this through a CoA that also shows moisture below 0.5 % and heavy‑metal concentrations under regulatory limits.

Which certifications are normally required for calcium hypochlorite imports?

Importers generally request an SDS, a CoA showing 65‑70 % available chlorine, and proof of REACH registration or an equivalent local chemical safety certification. ISO 9001 quality‑management certification is also commonly demanded.

How is cement from Turkey usually packaged for export?

Hydraulic cement is shipped in 25 kg or 50 kg polypropylene bags, and in bulk for large orders using open‑top containers. The packaging must meet EN 13688 standards for moisture resistance during sea transport.

What documentation is needed for exporting mineral water from Turkey?

Buyers should obtain a health certificate issued by the Turkish Ministry of Health, a laboratory report confirming microbiological limits (e.g., total coliform < 1 CFU/100 mL), and compliance with ISO 22000 or the EU Drinking Water Directive.

What are typical lead times for ground granulated blast furnace slag shipments?

Lead times for GGBS range from 3 to 6 weeks after order confirmation, depending on production batch size and container availability. Early confirmation of shipping terms (FOB Istanbul) helps align schedules.

Are there specific import regulations for pumice from Turkey?

Pumice classified under HS 2513.10 is subject to phytosanitary inspection in some regions and must meet the EN 12457 leaching limits for heavy metals. Importers often request a test report confirming bulk density and silica content.

How can I request a sample of urea 46?

Samadian provides a 5‑kg sample of urea 46, shipped in a sealed bag, accompanied by a CoA that details nitrogen content (46 % N), granule size distribution and moisture level (typically < 0.5 %). Samples are usually dispatched under FOB terms.