About Rigid Industries - Furniture Supplier in United Arab Emirates

Rigid Industries is registered in the United Arab Emirates and currently lists 22 active product lines. The catalogue covers metal lockers, metal filing cabinets, metal cupboards, office desks, workstations, steel and sheet‑metal furniture, fire‑resistant safes, glass furniture, interior joinery and an outdoor vertical garden. Products such as the RGD‑13S and RGD‑12S filing cabinets are recorded under HS codes 9403.10 and 9403.20 respectively, while the fire‑resistant safe carries HS code 8303.00 and the interior joinery entry uses HS code 4418.20. The supplier’s top categories include lockers, cabinets, canned vegetables (listed but not detailed), office furniture, steel furniture, wooden furniture and general furniture items.

The material specifications in the catalogue mention cold‑rolled steel with powder‑coated finish, CRCA mild steel sheet, reinforced steel with fire‑resistant insulation and solid timber/MDF/plywood/aluminum/glass for joinery. Metal lockers (RGD‑31S to RGD‑36S) and metal cupboards (RGD‑21S, RGD‑22S) are fabricated from cold‑rolled steel, a common choice for durability and corrosion resistance. The fire‑resistant safes are described as reinforced steel with insulating material designed to meet fire‑rating standards. Interior joinery items list a mix of timber‑based panels and metal frames, reflecting typical office and retail fit‑out requirements. The vertical garden product expands the range into outdoor modular horticulture solutions.

Product Range and Specialties of Rigid Industries

The listed catalogue includes three metal filing cabinets (RGD‑14S, RGD‑13S, RGD‑12S) with HS codes in chapter 94, metal lockers (RGD‑31S‑RGD‑36S), metal cupboards (RGD‑21S, RGD‑22S) and a fire‑resistant safe (HS 8303.00). In the broader furniture segment, the supplier offers metal desks (RGD‑51, RGD‑52S, RGD‑53S), single‑seater and L‑shape workstations with mobile pedestals, steel benches, doors, handrails and sheet‑metal bunk beds. Standard industry grades for such metal furniture typically use 0.8 mm to 1.2 mm gauge cold‑rolled steel, powder‑coat thickness of 80 - 120 µm, and compliance with EN 14015 for metal cabinets. Fire‑resistant safes are usually tested to a 1‑hour or 2‑hour fire rating according to IEC 61752, and buyers often request the corresponding fire‑test certificate. Wooden and MDF joinery items fall under HS 44 and are commonly produced to meet EN 14592 for furniture panels, with moisture content limited to 12 % to avoid warping. The vertical garden system is a modular metal frame designed for outdoor use, typically shipped in flat‑pack crates for container loading.

Trade and Export Information - Rigid Industries

The United Arab Emirates is a regional hub for re‑exporting furniture to the Gulf Cooperation Council, North Africa and South‑East Europe, with most shipments using 20‑ft or 40‑ft containers on roll‑on/roll‑off vessels. HS chapter 94 (furniture) and chapter 83 (safes) are the primary tariff classifications for Rigid Industries’ metal cabinets and fire‑resistant safes, while chapter 44 covers the timber‑based joinery. Importers in the GCC, EU and East Africa usually require CE marking, ISO 9001 quality management certification and, for fire‑rated safes, a fire‑test report conforming to IEC 61752. Standard packaging involves wooden pallets wrapped in stretch film, with corner protectors for large metal lockers and cabinets; anti‑corrosion wax or film may be added for shipments to humid climates. Common Incoterms are FOB Dubai Port or CIF Dubai, allowing buyers to arrange inland transport and customs clearance in the destination country.

Sourcing from Rigid Industries - Buyer Guidance

When sourcing metal filing cabinets or lockers, request the material test report confirming cold‑rolled steel grade (e.g., ASTM A572) and the powder‑coat thickness specification. For fire‑resistant safes, obtain the fire‑rating certificate, the type of insulation used, and verification that the product meets IEC 61752. Buyers of wooden joinery should ask for a moisture content report and confirmation of compliance with EN 14592 or equivalent panel standards. It is advisable to ask for a product data sheet that lists dimensions, load‑bearing capacity (e.g., 200 kg per locker shelf) and weight per unit, as these affect container stowage. Typical minimum order quantities are one unit for sample evaluation, with production runs often starting at 10 - 20 units for metal lockers and 5 units for fire safes, and lead times range from 30 to 45 days after order confirmation.

What HS codes are applied to Rigid Industries’ metal filing cabinets?

The RGD‑13S filing cabinet is listed under HS code 9403.10 and the RGD‑12S filing cabinet under HS code 9403.20, both belonging to chapter 94 for furniture.

Which material standards should I verify for the metal lockers?

Lockers are fabricated from cold‑rolled steel; buyers should request a material test report referencing ASTM A572 or equivalent and confirm powder‑coat thickness of at least 80 µm.

What certification is typically required for the fire‑resistant safe?

The safe should be accompanied by an IEC 61752 fire‑rating test report, usually for a 1‑hour fire resistance, and any applicable CE conformity documentation.

Are there specific packaging requirements for shipping the metal furniture?

Standard practice is to pack each unit on a wooden pallet, wrap with stretch film, add corner protectors, and load in a 20‑ft or 40‑ft container with a weight distribution not exceeding 2,200 kg per pallet.

What documentation is needed for the interior joinery items?

Buyers should ask for a moisture content certificate (≤12 %), a material safety data sheet for the MDF or plywood, and confirmation of compliance with EN 14592 or a comparable furniture panel standard.

What are typical lead times for a full locker set order?

Lead times for metal locker production in the UAE generally range from 30 to 45 days after order confirmation, depending on quantity and any custom finish requirements.

Can I obtain a sample before placing a larger order?

Yes, Rigid Industries can provide a single unit sample of any listed product, such as a filing cabinet or locker, to allow buyers to assess dimensions, finish quality and material compliance.