About Pneumatic Components Ltd - Industrial Valves & Gauges Supplier in South Korea (Republic Of Korea)

Based in South Korea (Republic Of Korea), Pneumatic Components Ltd lists six active products across four top categories: Industrial Valves & Gauges, Cooking Gas Stoves, Regulators & Burners, Industrial Cylinders, and Cosmetics & Beauty Products. The catalogue includes a solenoid valve, a filter‑regulator‑lubricator (FRL) unit, an air cylinder, a one‑touch fitting, a ball valve model KHB3K, and a dermatological acne patch. Each item is identified by its generic product name without additional specifications in the source data, and the supplier is classified in the “harbor” trust tier. The product set spans typical pneumatic hardware and a single cosmetic item. The solenoid valve and ball valve fall under the industrial valve segment, the FRL and air cylinder serve compressed‑air system applications, the one‑touch fitting provides quick‑connect solutions, and the Dr. Wonder Pimple Patch represents a hydrocolloid skin‑care product. No HS‑code details are provided, so the description relies on the product types and the supplier’s stated categories.

Product Range and Specialties of Pneumatic Components Ltd

The solenoid valve catalogue entry is a standard electrically actuated valve used for on‑off control of pneumatic circuits. In the industry, such valves are commonly supplied in NEMA 4X or IP66 enclosures, with pressure ratings from 0.1 to 1 MPa and coil voltages of 24 V DC or 110/220 V AC. The ball valve listed as “ALL Land - KHB3K” aligns with ANSI/ASME B16.34 Class 150 to 300, typically fabricated from forged carbon steel or stainless steel (AISI 304/316) and featuring a 0.5‑inch to 2‑inch bore range. The Filter Regulator Lubricator (FRL) is a combined unit that cleans, reduces, and lubricates compressed air; industry units usually cover flow capacities of 10‑200 L/min, pressure regulation from 0.1‑0.7 MPa, and incorporate stainless‑steel filter cartridges (ISO 8573‑1 Class 1‑3). Air cylinders are supplied in bore diameters from 25 mm to 200 mm, with working pressures up to 10 bar, and conform to ISO 15500‑1 material and testing standards. One‑touch fittings are quick‑connect couplings, often made of brass or stainless steel, with standard 1/4‑inch to 3/8‑inch NPT threads. The Dr. Wonder Pimple (Acne) Patch is a hydrocolloid dermatological product, typically produced under ISO 22716 good manufacturing practice for cosmetics, with a typical patch size of 2 cm × 2 cm and a moisture‑absorbing polymer base.

Trade and Export Information - Pneumatic Components Ltd

South Korea is a major exporter of pneumatic components, with the majority of shipments destined for East Asian manufacturing hubs, European automation firms, and North American OEMs. Exported solenoid valves and ball valves usually fall under HS Chapter 84 (HS 8481 for solenoids, HS 8482/8483 for valves), while FRL units and air cylinders are classified under HS 8424 and HS 8425 respectively. Cosmetic patches are recorded under HS 3004 for dermatological preparations. Buyers typically request CE marking, ISO 9001 quality management certification, and where applicable UL or IECEx approval for equipment used in hazardous atmospheres. Packaging follows industry norms: valves and cylinders are packed in wooden crates or reinforced cardboard with moisture‑resistant liners; FRL units are palletized with protective foam; quick‑connect fittings are boxed in anti‑static bags; cosmetic patches are sealed in sterile foil packs. Standard Incoterms for Korean exporters include FOB Busan or CIF Shanghai, with container loads of 20 ft (≈15 m³) or 40 ft (≈30 m³) depending on product volume.

Sourcing from Pneumatic Components Ltd - Buyer Guidance

When sourcing from Pneumatic Components Ltd, buyers should request the latest material test reports (e.g., tensile strength for steel bodies, corrosion resistance data) and pressure‑test certificates that verify compliance with ISO 15500 for cylinders and ASME B16.34 for ball valves. For the FRL unit, a filtration efficiency test (ISO 8573‑1) and regulator accuracy report are customary. Cosmetic buyers should ask for a Certificate of Analysis, safety data sheet, and proof of ISO 22716 GMP compliance. Samples are typically provided in single‑unit quantities for valves and fittings, and in a 10‑piece set for the acne patches. Minimum order quantities often start at one container load for bulk hardware (≈1,000 units of valves or cylinders) and at 500 units for the FRL. Lead times in South Korea range from 4 weeks for standard valve models to 8 weeks for customized FRL units, while cosmetic patches may require 6‑8 weeks due to sterile packaging. Verification of CE or other conformity marks before shipment helps reduce customs holds.

What HS codes are applicable to the products listed by Pneumatic Components Ltd?

Typical HS classifications are 8481 for solenoid valves, 8482/8483 for ball valves, 8424 for filter‑regulator‑lubricator units, 8425 for air cylinders, 3926 for plastic quick‑connect fittings, and 3004 for dermatological acne patches.

Which certifications should a buyer request for the pneumatic hardware?

Buyers normally request CE marking, ISO 9001 quality‑management certification, and where the equipment may be used in explosive atmospheres, IECEx or UL certification. Material test reports and pressure‑test certificates should also be supplied.

What are the typical material specifications for the ball valve KHB3K?

Ball valves of this type are generally forged carbon steel or stainless steel (AISI 304/316), conform to ANSI/ASME B16.34 Class 150‑300, and have a pressure rating of up to 1.6 MPa (230 psi) with a 0.5‑inch to 2‑inch bore.

How is the Filter Regulator Lubricator (FRL) tested for performance?

FRL units are usually tested for filtration efficiency according to ISO 8573‑1 (Class 1‑3), pressure regulation accuracy within ±5 % of setpoint, and flow capacity measured in L/min at standard temperature and pressure.

What documentation is required for the Dr. Wonder Pimple (Acne) Patch?

Buyers should obtain a Certificate of Analysis, a safety data sheet, proof of compliance with ISO 22716 GMP, and, if required by the destination market, a dermatological product registration number.

What are the common packaging and shipping methods for these products?

Industrial valves and cylinders are typically crated in wooden boxes with moisture‑resistant liners; FRL units are palletized with foam inserts; quick‑connect fittings are boxed in anti‑static bags; cosmetic patches are sealed in sterile foil packs. Shipments are usually sent in 20‑ft or 40‑ft containers under FOB Busan or CIF Shanghai terms.

What are typical lead times for orders from this supplier?

Standard valve and cylinder orders are generally ready for shipment within 4 weeks, customized FRL units may require up to 8 weeks, and the cosmetic acne patches usually need 6‑8 weeks for production and sterile packaging.

What minimum order quantities (MOQ) apply to the listed products?

Hardware such as solenoid valves, ball valves, and air cylinders often have an MOQ of one container load (≈1,000 units), while FRL units may start at 500 units. The acne patches are commonly ordered in batches of at least 5,000 patches per lot.