About Ningbo Pioneer Adhesive Co., Ltd. - Silicon Sealants Supplier in China

Ningbo Pioneer Adhesive Co., Ltd. is based in Ningbo, China and lists six active adhesive products. The catalogue includes a blister pack super glue, a modified acrylic AB glue, a 5‑minute clear epoxy AB glue, an RTV silicone gasket maker, a general‑purpose silicone sealant, and a 20 g cyanoacrylate adhesive. These items fall under the broader HS chapter 35 adhesive category, typically classified under HS 3506.00 for polymer adhesives. The supplier’s primary market segment is silicone sealants, as indicated by the top‑category label. The product set spans both silicone‑based sealants and solvent‑free acrylic, epoxy, and cyanoacrylate chemistries.

The listed silicone products are supplied as RTV (room‑temperature vulcanising) formulations used for gasket creation and general sealing, while the acrylic and epoxy items are two‑component systems designed for rapid cure and high strength. The 20 g cyanoacrylate tube provides instant bonding for small‑scale applications. Typical specifications for these classes include operating temperature ranges from - 40 °C to +200 °C for silicone sealants, tensile strengths of 15 - 30 MPa for epoxy, and shear strengths of 10 - 20 MPa for acrylic adhesives. All six products are offered in standard retail packaging such as blister packs, 20 g tubes, and 500 ml cartridges, facilitating bulk shipment in 20‑ft containers.

Product Range and Specialties of Ningbo Pioneer Adhesive Co., Ltd.

The catalogue covers five distinct adhesive chemistries: a blister‑pack super glue (cyanoacrylate), a modified acrylic AB glue, a fast‑cure clear epoxy AB glue, an RTV silicone gasket maker, a general‑purpose silicone sealant, and a 20 g cyanoacrylate tube. In the silicone segment, buyers commonly encounter neutral‑cure and acetoxy‑cure grades, with typical DIN 6800 or ISO 11600 compliance for compression set and tensile strength. Acrylic AB systems are usually formulated to meet ASTM D1002 shear standards, while quick‑cure epoxy adhesives often target a 5‑minute gel time and tensile strengths around 30 MPa. Cyanoacrylate adhesives are evaluated against ASTM D3359 adhesion tests and are supplied in low‑viscosity or high‑viscosity grades depending on the intended substrate.

Trade and Export Information - Ningbo Pioneer Adhesive Co., Ltd.

China is a major exporter of polymer adhesives, and products classified under HS 3506.00 are shipped to regions including Southeast Asia, Europe, and North America. Importers typically require compliance with REACH registration, ISO 9001 quality management, and, for food‑contact silicone sealants, FDA 21 CFR 177.2600 certification. Standard export packaging includes sealed drums, pails, or bulk cartons, and logistics often use FOB or CIF terms with 20‑ft containers holding up to 1 800 kg of adhesive material. Regulatory inspections may involve customs‑origin verification and safety data sheet (SDS) submission.

Sourcing from Ningbo Pioneer Adhesive Co., Ltd. - Buyer Guidance

When sourcing from Ningbo Pioneer Adhesive, buyers should request the latest technical data sheet, material safety data sheet, and any third‑party test reports such as ASTM D1002 for shear strength or ASTM D2240 for hardness. Verifying that the products meet the relevant industry standards - neutral‑cure silicone for automotive gaskets, rapid‑cure epoxy for electronic encapsulation, or ISO‑graded cyanoacrylate for medical devices - helps ensure suitability. Clarify packaging dimensions, MOQ (commonly 500 units for tube‑type adhesives) and lead time, which is typically 2 - 4 weeks after order confirmation.

What adhesive product categories does Ningbo Pioneer Adhesive list?

The supplier lists six items covering silicone sealants (RTV gasket maker and general‑purpose sealant), a modified acrylic AB glue, a 5‑minute clear epoxy AB glue, a blister‑pack super glue, and a 20 g cyanoacrylate adhesive.

Which HS code family is applicable to these products?

Polymer adhesives from this catalogue are generally classified under HS chapter 35, most commonly HS 3506.00 for adhesive preparations.

What certifications should a buyer request for silicone sealants from China?

Buyers should ask for REACH registration, ISO 9001 quality‑management certification, and, where food‑contact is required, FDA 21 CFR 177.2600 compliance.

What typical performance specifications apply to the RTV silicone gasket maker?

RTV silicone gasket makers are usually neutral‑cure, with operating temperature ranges from - 40 °C to +200 °C, compression set below 5 % after 24 h, and tensile strength around 3 - 5 MPa.

How is the 5‑minute clear epoxy AB glue commonly tested?

The epoxy is evaluated for gel time (approximately 5 minutes at 25 °C), tensile strength (≈30 MPa) and shear strength according to ASTM D1002.

What are the usual packaging and shipping formats for the 20 g cyanoacrylate adhesive?

It is supplied in 20 g sealed tubes, packed in bulk blister trays or cartons, and shipped in 20‑ft containers with typical load capacity of 1 800 kg.