About Nanjing Xuedian Lighting Co., Ltd. - Photographic & Optical Equipment Supplier in China

China hosts the supplier Nanjing Xuedian Lighting Co., Ltd., which currently lists six active products in its catalogue. All items fall under the Photographic & Optical Equipment category, specifically lighting and mast solutions used for vehicular and site illumination. The product set includes a night‑scan tower for trucks and police vehicles, a Q235 steel street pole available in lengths from 6 m to 20 m, a 4 m portable camera pole, an 8 m pneumatic mast with tripod, a 10 m telescoping mast for mobile antenna use, and a 12 m telescopic antenna mast mounted on a trailer. Each entry references a distinct functional application such as mobile lighting, surveillance or telecommunications. The catalogue does not provide HS codes, so classification follows the typical HS chapters for lighting structures (chapter 94) and steel constructions (chapter 73).

The listed masts and poles are offered in standard steel grades and lengths, with the street pole explicitly described as Q235, a low‑carbon structural steel commonly used for outdoor pole applications. The telescoping and pneumatic masts are described by their maximum extension heights, indicating suitability for temporary or mobile deployments where height flexibility is required. The truck‑mounted night scan tower suggests integration of high‑intensity lighting for emergency or law‑enforcement vehicles. The product descriptions focus on dimensional specifications rather than performance metrics, leaving load capacity and coating details to be confirmed with the supplier.

Product Range and Specialties of Nanjing Xuedian Lighting Co., Ltd.

The catalogue’s six items cover a spectrum of lighting‑support structures, from fixed street poles to portable telescoping masts. In the Chinese market, street poles designated as Q235 steel comply with GB/T 3077 standards for hot‑rolled structural sections and are often hot‑dip galvanized to meet corrosion‑resistance requirements for outdoor service. Portable camera poles of 4 m length are typically fabricated from aluminium alloy (e.g., 6063‑T5) to reduce weight while maintaining stiffness, and are finished with powder coating for durability. Pneumatic and telescoping masts used for mobile lighting or antenna deployment commonly employ aluminium or high‑strength steel frames, with lift capacities ranging from 50 kg to 200 kg depending on the extension length. Industry‑wide, such masts are classified under HS code 7308 for structures of iron or steel, while lighting fixtures themselves fall under HS 9405. Buyers often specify IEC 60598 compliance for lighting safety and EN 40 for pole strength.

Trade and Export Information - Nanjing Xuedian Lighting Co., Ltd.

China remains a major exporter of lighting support equipment, supplying Asia‑Pacific, the Middle East, Africa and parts of Europe. Export shipments of steel poles and telescoping masts are usually packed in wooden crates or metal pallets, loaded into 20‑ft or 40‑ft containers, and shipped under Incoterms FOB Shanghai or CIF destination port. Buyers typically request CE marking, ISO 9001 quality‑management certification, and, where applicable, RoHS compliance for any integrated lighting modules. Customs authorities often inspect the HS chapter 73 or 94 declarations for correct tariff treatment and may request material test certificates for Q235 steel.

Regulatory checks in importing countries may include verification of load‑test reports and wind‑load classifications (e.g., IEC 60721‑3‑3 for environmental conditions). Suppliers from China frequently provide a factory‑issued test report confirming compliance with the relevant national standards (GB/T 3843 for steel quality, GB/T 20234 for street lighting). Buyers should also confirm that packaging meets ISPM 15 standards for wooden pallets to avoid quarantine delays.

Sourcing from Nanjing Xuedian Lighting Co., Ltd. - Buyer Guidance

When sourcing the listed masts and poles, buyers should request the material certificate for Q235 steel, the coating specification (galvanized, powder‑coated or painted), and load‑bearing test results that correspond to the advertised height. For the portable camera pole and pneumatic mast, a weight‑capacity chart and a brief performance video can help assess suitability for field deployment.

In addition, buyers are advised to obtain the supplier’s ISO 9001 certification copy and any CE or RoHS declarations that apply to integrated lighting units. Clarifying the packaging dimensions, container loading plan and the preferred Incoterm (FOB or CIF) before order confirmation reduces the risk of shipment delays. Sampling a single unit of each mast type is standard practice to verify dimensional accuracy and surface finish.

What lighting support structures does Nanjing Xuedian Lighting list?

The catalogue includes a truck‑mounted night scan tower, Q235 steel street poles in lengths from 6 m to 20 m, a 4 m portable camera pole, an 8 m pneumatic mast with tripod, a 10 m telescoping mast for mobile antenna use, and a 12 m telescopic antenna mast on a trailer.

Which material grade is used for the street poles?

The street poles are specified as Q235 steel, a low‑carbon structural steel that complies with Chinese GB/T 3077 standards for hot‑rolled sections.

Are the telescoping masts suitable for temporary installations?

Yes, the 8 m pneumatic mast, the 10 m telescoping mast and the 12 m trailer‑mounted mast are designed for mobile or temporary deployment, offering height adjustability and generally supporting loads between 50 kg and 200 kg, subject to supplier confirmation.

What certifications should a buyer verify for these products?

Buyers should request the supplier’s ISO 9001 quality‑management certificate, any CE marking for integrated lighting components, and material test certificates confirming the Q235 steel grade. RoHS compliance may be relevant if electronic lighting modules are included.

What are the typical packaging and shipping methods?

Products are normally packed in wooden crates or metal pallets, loaded into 20‑ft or 40‑ft containers, and shipped under FOB Shanghai or CIF to the destination port. Wooden pallets should meet ISPM 15 treatment requirements.

What documentation is needed for customs clearance?

Customs typically requires the commercial invoice, packing list, HS code declaration (chapter 73 for steel structures or chapter 94 for lighting fixtures), and the material test certificate for the steel components.

What is the minimum order quantity for these masts?

The catalogue does not state an MOQ; buyers should negotiate directly with the supplier, though Chinese manufacturers commonly accept single‑unit sample orders and then scale to container loads.

How long is the lead time for a standard street pole?

Lead times vary by product and order size; a typical production lead time for a Q235 street pole ranges from 15 to 30 days after order confirmation, subject to the supplier’s current capacity.