About MSD Lighting Co., Ltd. - Aluminum Profiles Supplier in China

MSD Lighting Co., Ltd. is based in China and currently lists nine active products in its catalogue. The supplier groups its offerings under the categories Light Emitting Diode, Aluminum and Household Furniture, focusing on aluminium extrusion profiles that are used to mount or protect LED strip lighting. Each entry describes a specific shape or application, such as corner channels, O‑shape suspend extrusions, or window decoration profiles. Two of the nine items include explicit HS codes (7604.29) and material specifications, indicating the use of Aluminum Alloy 6063‑T5 or a generic aluminium alloy with 90‑97 % aluminium content. The remaining items are described by function only, but all fall within the same HS‑code family for extruded aluminium products.

The catalogue mentions products such as “IP65 Aluminium Profile For LED Strip”, “Classic Aluminum Profile For LED Flexible Strip” and “Housing Furniture Fixture Strip Light Channels”. These titles reveal that the profiles are intended for indoor and outdoor lighting installations, with at least one item highlighting an IP65 protection rating. The presence of “Aluminium Profile Extrusion” terminology confirms that the items are produced by extrusion processes typical for aluminium alloy 6000 series. The supplier’s active product count of nine suggests a focused offering rather than a broad hardware line.

Product Range and Specialties of MSD Lighting Co., Ltd.

The nine catalogue items cover standard linear profiles, corner channels, O‑shape suspend extrusions and decorative window sections. Typical aluminium extrusion for LED fixtures uses the 6000 series alloys, most commonly 6063‑T5, which provides good surface finish and corrosion resistance. Industry practice grades these profiles to meet dimensional tolerances of ±0.2 mm and surface roughness Ra ≤ 1.6 µm, with optional anodising for enhanced durability. LED strip sections often require an IP65 rating for outdoor use, meaning the profile must prevent water ingress under low pressure spray. Buyers also look for profiles that accommodate standard LED strip widths of 8 mm, 10 mm or 12 mm and allow for heat dissipation through the aluminium body.

Trade and Export Information - MSD Lighting Co., Ltd.

China is a leading exporter of aluminium extrusion products for LED lighting, and the HS code 7604.29 is routinely used for extruded aluminium sections not elsewhere specified. Typical import markets include the European Union, the United States, and Southeast Asian countries where LED retro‑fit projects are common. Buyers usually request certificates such as ISO 9001 quality management, CE conformity for EU markets and RoHS compliance for electronic components. Shipping is frequently arranged in 20 ft or 40 ft containers with wooden pallets or bulk crates, using FOB or CIF Incoterms. Chinese exporters often provide mill test reports (MTR) for the alloy composition and may apply anti‑corrosion treatments before dispatch.

Sourcing from MSD Lighting Co., Ltd. - Buyer Guidance

When sourcing aluminium profiles from this supplier, request a mill test report that confirms the alloy designation (e.g., 6063‑T5) and the exact chemical composition. Verify the IP rating, especially for items labelled IP65, by asking for an independent test certificate or a third‑party inspection report. Samples of the profile cross‑section are useful to confirm dimensional accuracy, surface finish and compatibility with the intended LED strip width. Request documentation of any surface treatment such as anodising or powder coating, and confirm that the packaging will protect the extrusions during sea freight (e.g., double‑wall cardboard or wooden crates).

What types of aluminium profiles are listed in the catalogue?

The catalogue includes linear extrusion profiles for LED strips, corner channels, O‑shape suspend sections, window decoration sections and furniture fixture channels. Each item is designed to house or protect LED tape or strip lighting.

Are any of the profiles rated for outdoor use?

One product is described as “IP65 Aluminium Profile For LED Strip”, indicating it meets the IP65 standard for protection against dust and water jets. Buyers should request the IP test report to confirm compliance.

Which HS code applies to the listed aluminium products?

Two products specify HS code 7604.29, which covers other extruded aluminium articles not elsewhere classified. This code is commonly used for custom aluminium profiles.

What material specifications are provided for the profiles?

One item cites Aluminum Alloy 6063‑T5, a standard alloy for extrusion with good formability and surface finish. Another mentions an aluminium alloy with 90‑97 % aluminium, silicon, magnesium and manganese as secondary elements.

What certifications are typically required for aluminium LED profiles?

Buyers usually request ISO 9001 for quality management, CE marking for EU market entry and RoHS compliance for electronic component safety. These certificates should be supplied by the exporter upon request.

What is the typical minimum order quantity and lead time?

Minimum order quantities for custom aluminium extrusions often start at one container load, roughly 20 ft, but the exact MOQ depends on profile dimensions and finish. Lead times in China for extrusion and finishing are generally 30‑45 days from order confirmation.

How are the profiles packaged for international shipment?

Standard practice is to pack extruded sections in wooden crates or bulk pallets with protective cardboard inserts to prevent deformation. Containers are sealed and may include moisture‑absorbing packs for longer voyages.

How can a buyer request a sample or technical data?

A buyer should contact the supplier with the specific product name and request a dimension drawing, material certification and, if needed, a physical sample. Samples are typically shipped in a small parcel under FOB terms.