About Mora Calibration - Tools & Instruments Supplier in Indonesia

Indonesia, Jakarta, lists six active products in its catalogue. The supplier focuses on tools and instruments, specifically calibration and measurement devices. The product list includes Fluke Pressurements P3111-BAR, Additel ADT760-MA-DL VIP Kit, DH-Budenberg / Mensor CPB3800-DUALST-10000PSI, WIKA Instrument PASCAL100IS-2IPS-2IN-1OUT-EPS-PR, Additel ADT760, and Ametek MG PK2-404WC-SS-1A. These items cover pressure measurement, torque testing, and data logging functions. The catalogue is presented under the single top category of Tools & Instruments.

Mora Calibration serves customers in aerospace, automotive, electronics, wind energy, solar energy, oil and gas pipeline, power transmission, utilities, and natural gas sectors. The supplier is classified as an imported tier with a harbor trust tier. Its profile emphasizes a broad range of calibration instruments, dimensional measuring tools, electrical test instruments, environmental testing equipment, process instruments, recorders/data loggers, temperature measurement devices, power quality meters, torque tools, and preventative maintenance equipment. No additional product categories are listed beyond the six items. The description does not include specific certifications held by the supplier.

Product Range and Specialties of Mora Calibration

The listed catalogue contains pressure transducers, torque kits, and data logging devices from brands such as Fluke, Additel, DH‑Budenberg, Mensor, WIKA, and Ametek. In the pressure measurement segment, instruments like the Fluke Pressurements P3111-BAR and the DH‑Budenberg/Mensor CPB3800‑DUALST‑10000PSI typically operate up to 10 000 psi, offer accuracy of ±0.25 % of full scale, and meet IEC 61010 safety standards. Torque testing kits such as the Additel ADT760 series commonly provide a torque range of 1 Nm to 500 Nm with repeatability of ±0.1 % and are often calibrated against NIST traceable standards. Data logger models like the Ametek MG PK2‑404WC‑SS‑1A usually feature multiple channels, sampling rates of up to 1 kHz, and memory capacity sufficient for several days of continuous recording. Buyers generally expect CE marking, ISO 9001 quality management, and calibration certificates conforming to ISO/IEC 17025 for these types of instruments.

Trade and Export Information - Mora Calibration

Indonesia has a growing export segment for industrial measurement and calibration equipment, with HS chapter 90 covering most of the listed items. Pressure gauges and transducers fall under HS code 9026.10, while torque and testing devices are classified under HS code 9032.89. Export shipments from Jakarta often use 20‑ft containers packed in wooden crates with moisture‑resistant liners, and sea freight on FOB terms is common for bulk orders. Typical destination markets include Europe, North America, and the Middle East, where aerospace, automotive, and energy industries import such instruments for quality control and compliance testing. Importing parties frequently require CE conformity, UL listing, and calibration certificates aligned with NIST or ISO/IEC 17025 standards. Indonesian exporters also adhere to local customs regulations that mandate a commercial invoice, packing list, and certificate of origin for HS code 9026 and 9032 classifications.

Sourcing from Mora Calibration - Buyer Guidance

When sourcing from this supplier, request the latest data sheet for each instrument, along with a calibration certificate that specifies traceability to NIST or an equivalent national standard. Verify that the product complies with IEC 61010 safety requirements and that CE or UL markings are documented on the certificate of conformity. Minimum order quantities for precision instruments are often a single unit, but lead times of two to four weeks should be confirmed, especially for calibrated kits that may require additional testing. Packaging is typically in insulated wooden crates with anti‑static lining for electronic components, and buyers should arrange sea freight on FOB Jakarta or air freight for urgent deliveries. Prior to finalizing the order, confirm the HS code classification, required import permits, and any additional testing reports demanded by the destination country.

What measurement instruments are listed in Mora Calibration’s catalogue?

The catalogue includes six items: Fluke Pressurements P3111‑BAR, Additel ADT760‑MA‑DL VIP Kit, DH‑Budenberg / Mensor CPB3800‑DUALST‑10000PSI, WIKA Instrument PASCAL100IS‑2IPS‑2IN‑1OUT‑EPS‑PR, Additel ADT760, and Ametek MG PK2‑404WC‑SS‑1A. These cover pressure measurement, torque testing, and data logging functions.

How can a buyer obtain a sample of the Fluke Pressurements P3111‑BAR?

A buyer should contact the supplier to request a pre‑shipment sample and specify the intended application. The supplier typically ships a single unit in a protective wooden crate with anti‑static padding, and the buyer may be asked to cover the cost of air freight for expedited delivery.

Which certifications are commonly required for the pressure and torque instruments offered by this supplier?

Importers usually request CE or UL marking for safety compliance, an ISO 9001 quality management certificate, and a calibration certificate that follows ISO/IEC 17025 or NIST traceability. Documentation confirming adherence to IEC 61010 is also standard for measurement devices.

What is the typical lead time for the DH‑Budenberg / Mensor CPB3800‑DUALST‑10000PSI unit?

Lead time for this pressure transducer is generally two to four weeks from order confirmation, depending on stock availability and any required calibration verification. Expedited production may be arranged for an additional fee.

What packaging is used for the WIKA Instrument PASCAL100IS series?

The WIKA instrument is normally packed in a reinforced wooden crate with moisture‑resistant liners and anti‑static inner padding to protect the electronic components. The crate is sized to fit a standard 20‑ft container pallet slot.

Are the Additel ADT760 kits calibrated against NIST standards?

Buyers should request the calibration certificate for the Additel ADT760 kits to confirm NIST traceability. The supplier can provide a copy of the report that details the reference standards used during calibration.

Which HS codes apply to the products in this catalogue?

Pressure transducers such as the Fluke and DH‑Budenberg models typically fall under HS code 9026.10. Torque testing kits and related instruments like the Additel and Ametek units are usually classified under HS code 9032.89. Data loggers may be recorded under HS code 9025.80, depending on their primary function.

Which regions commonly import these Indonesian calibration instruments?

European Union countries, the United States, and Gulf Cooperation Council states are the main importers of calibration and measurement equipment from Indonesia. These regions use the instruments in aerospace, automotive, renewable energy, and oil‑and‑gas sectors for quality assurance and regulatory compliance.