About Marlins Medico - Wires & Cables Supplier in India

India hosts Marlins Medico, a supplier listed with six active products. The company’s catalogue falls under the Wires & Cables category, focusing on interventional medical devices. Products include the Octopus TS2000 system, Sprinter Legend Balloon, Guiding Catheter, Abbott Guide Wire, Data Scop Balloon, and Octopus Maquet. These items are classified within the medical device HS sections for catheters and guide wires, typically HS 9018 and 9019. The listing does not provide additional corporate details beyond product count and category.

The guide wires and catheters are generally manufactured from stainless steel or nitinol cores with polymer coatings to balance torque transmission and flexibility. Balloon devices such as the Sprinter Legend and Data Scop are usually made of compliant polymer blends rated for pressures up to 12 atm. Industry standards for these products reference ISO 10555 for intravascular catheters and ISO 25539 for cardiovascular guide wires. Typical dimensions include guide‑wire diameters from 0.014 to 0.036 inches and catheter lengths of 120 to 260 cm. Product packaging is commonly sterile, sealed in medical‑grade pouches suitable for container loading.

Product Range and Specialties of Marlins Medico

Based on the catalogue, Marlins Medico offers guide wires (Abbott Guide Wire), guiding catheters, and balloon catheters such as Sprinter Legend Balloon and Data Scop Balloon. Typical guide‑wire grades range from low‑profile 0.014 in to high‑support 0.038 in, with PTFE or hydrophilic polymer coatings, while balloon catheters are classified by compliance level and burst‑pressure rating, commonly available in diameters from 2 mm to 20 mm and lengths from 10 mm to 40 mm. In the medical wires and cables segment, manufacturers often use stainless‑steel 316L or nitinol for wire cores, polymer jackets of polyurethane or Pebax, and balloon materials of nylon‑PET blends. Quality checks usually include tensile strength above 30 N, torque resistance over 0.5 Nm, and balloon inflation leakage below 0.1 ml/min. Buyers typically expect CE marking for EU markets and ISO 13485 quality‑management certification for this product class.

Trade and Export Information - Marlins Medico

India is a major exporter of interventional medical devices, supplying Europe, North America and the Middle East. The relevant HS code families fall under chapter 90 - HS 9018 for surgical instruments and other medical devices (guide wires, catheters) and HS 9019 for other medical devices such as balloon catheters. Export shipments are normally packed in sterile barrier pouches and loaded into 20‑ft or 40‑ft containers, with Incoterms like FOB or CIF frequently used. Importers generally require ISO 13485 certification, CE conformity assessment and, where applicable, FDA 510(k) clearance. Inspection regimes may involve pre‑shipment sampling and compliance with the EU Medical Device Regulation (MDR) or comparable national regulations. Indian exporters often work with logistics providers experienced in temperature‑controlled transport for devices sensitive to humidity.

Sourcing from Marlins Medico - Buyer Guidance

Buyers should request a detailed material specification sheet for each device, covering wire core composition, coating type, balloon polymer formulation and dimensional data. Verification of ISO 13485 registration, CE Declaration of Conformity and any FDA clearance should be obtained before order finalisation. Samples are typically supplied in sterile packaging, allowing buyers to perform functional tests such as torque, kink resistance and balloon burst‑pressure. Confirm that the HS code declared on the commercial invoice matches the product category (e.g., 9018 for catheters, 9019 for balloons). Request a packing list that details container load, sterility indicators and expiry dates where applicable. Lead times for medical devices from India usually range from four to eight weeks after order confirmation, depending on batch size and required regulatory documentation.

What product categories does Marlins Medico list?

Marlins Medico lists six medical‑device items that fall under the Wires & Cables category, including guide wires, guiding catheters and balloon catheters such as Octopus TS2000 and Sprinter Legend Balloon. The catalogue does not include other categories.

Which HS codes are applicable to the listed products?

The guide wires and catheters are normally classified under HS chapter 90, specifically HS 9018 for surgical instruments and other medical devices, while balloon catheters are often recorded under HS 9019. The supplier’s data does not provide explicit HS codes, so buyers should verify the correct tariff code at customs.

What material specifications should a buyer check for the guide wires?

Buyers should confirm whether the wire core is made of stainless‑steel 316L or nitinol and whether the outer coating is PTFE, hydrophilic polymer, or a combination. Additional details such as diameter (0.014‑0.038 in) and tensile strength (>30 N) are typical performance metrics.

Are any certifications listed for Marlins Medico?

The supplied facts do not mention any certifications held by the supplier. Buyers are advised to request copies of ISO 13485, CE Declaration of Conformity and any FDA 510(k) clearance relevant to the specific device.

What are typical packaging and shipping formats for these devices?

Medical devices are usually packed in sterile, sealed pouches placed in corrugated boxes, with container loads of 20 ft or 40 ft containers. Incoterms such as FOB or CIF are commonly used for Indian exporters.

What is a reasonable lead time for an order from Marlins Medico?

Lead times for medical‑device production in India generally range from four to eight weeks after order confirmation, depending on order size and required documentation. Buyers should confirm exact timings during the quotation process.

How can a buyer obtain a sample before placing a full order?

Samples are typically provided in sterile packaging and may be shipped under a small‑parcel service or as part of a pilot container load. The buyer should request a sample quote and specify any required test reports, such as torque or burst‑pressure data.