About LPP Paper Plate Private Limited - Paper Cups Supplier in India

India hosts LPP Paper Plate Private Limited, which currently lists 17 distinct paper cup products in its catalogue. The company’s inventory includes simple, printed and ripple‑style cups ranging from 3 oz to 16 oz capacity. Each entry specifies the cup type - for example, “3 Oz Paper Cup”, “5 Oz Printed Paper Cup” or “12 Oz Ripple Paper Cup” - allowing buyers to identify the exact configuration required. The catalogue is organized by cup style and volume, without reference to additional accessories or related items. All listed items fall under the broader disposable paper cup segment, which is classified within the paper and paperboard HS chapter for trade purposes.

The product set covers four primary families: plain (simple) cups, printed cups with branding potential, ripple‑structured cups for added rigidity, and a small selection of unmarked 3 oz cups. Sizes progress in 1‑oz increments for the printed line and in 2‑oz increments for the simple and ripple lines, providing a clear progression for bulk ordering. No other product categories such as plates or containers appear in the current active list. The data reflects the exact offerings supplied by the company, without extrapolation or inferred product extensions.

Product Range and Specialties of LPP Paper Plate Private Limited

LPP Paper Plate Private Limited’s catalogue presents three core cup constructions: simple paper cups, printed paper cups and ripple‑enhanced cups. Simple cups are typically produced from food‑grade paperboard with a thin polyethylene coating to provide moisture resistance. Printed cups carry a single‑side or double‑side graphic layer, often applied by flexographic printing, and use the same coated substrate. Ripple cups feature a corrugated sidewall that increases structural strength, allowing them to hold higher liquid volumes without deformation. In the wider industry, paper cups are commonly graded by wall thickness (usually 0.18‑0.25 mm) and by the level of coating, measured in grams per square meter (g/m²). Standard industry specifications include FDA food‑contact approval for the coating and ISO 22000 for hygiene management. Typical export‑ready packaging consists of 500‑800 cups per corrugated carton, stacked to fit a 20‑ft container efficiently.

Beyond the listed sizes, buyers often encounter variations such as double‑wall construction for hot beverage service, or biodegradable coatings derived from PLA. While LPP’s current list does not specify these variants, the market frequently demands such options for premium segments, especially in European and North American food service channels.

Trade and Export Information - LPP Paper Plate Private Limited

India is a major exporter of disposable paper tableware, with paper cups shipped mainly to the United States, Europe, the Middle East and Southeast Asia. The HS chapter 48 (paper and paperboard) and sub‑heading 4819.10 (paper cups) are routinely used for customs clearance of these items. Importers typically require compliance with food‑contact regulations such as the U.S. FDA CFR 21, the EU Regulation 1935/2004, and may request ISO 9001 quality‑management certification as a baseline. Standard Incoterms for bulk paper cup shipments include FOB Indian ports (e.g., Nhava Sheva) and CIF to destination ports, with container loading optimized for 20‑ft or 40‑ft units depending on order volume. Indian exporters often provide a Certificate of Origin and a laboratory test report confirming the coating’s food‑safety status. Buyers in hospitality, catering and fast‑food chains frequently seek products that meet both moisture‑resistance and structural integrity standards for hot and cold beverages.

Regulatory inspections in India are overseen by the Food Safety and Standards Authority of India (FSSAI), and many exporters align their processes with its guidelines to facilitate smoother customs clearance abroad. Typical documentation includes a commercial invoice, packing list, bill of lading, and where applicable, a phytosanitary certificate for wooden pallets used in containerization.

Sourcing from LPP Paper Plate Private Limited - Buyer Guidance

When sourcing paper cups from LPP Paper Plate Private Limited, buyers should request a material safety data sheet (MSDS) and a coating test report that confirms compliance with the relevant food‑contact standards. Samples of each cup style - simple, printed and ripple - are advisable to verify print quality, rim strength and coating uniformity before placing a bulk order. Verification of the supplier’s ISO or FSSAI certifications, if any, should be part of the due‑diligence process; otherwise, buyers can request these documents directly. Confirm the packaging configuration (e.g., cups per carton, carton dimensions) to ensure compatibility with warehouse handling and container loading plans.

Typical minimum order quantities for paper cup exporters from India range from 10 000 to 50 000 units per size, with lead times of 30  -  45 days after order confirmation and receipt of artwork for printed cups. Buyers should also clarify the preferred Incoterm, container size and whether the shipment will be palletized, as these factors affect freight cost and handling at the destination port.

What cup sizes does LPP Paper Plate Private Limited offer?

The catalogue lists cups in capacities of 3 oz, 5 oz, 6 oz, 8 oz, 12 oz and 16 oz across three styles: simple, printed and ripple.

Are the cups suitable for hot beverages?

All listed cups are made from paperboard with a moisture‑resistant coating, which is standard for hot‑drink service, but buyers should verify the coating thickness and heat‑resistance specifications in the test report.

What printing options are available?

Printed cups in the catalogue carry graphics on the exterior surface; buyers can provide artwork for single‑side or double‑side printing, typically applied by flexographic process.

Which certifications should I request?

Request an FDA food‑contact compliance report, an EU food‑contact declaration if exporting to Europe, and any ISO‑based quality‑management certificates the supplier holds.

What is the typical packaging format?

Paper cups are usually packed in corrugated cartons holding 500‑800 cups, with cartons stacked on pallets that fit a standard 20‑ft container.

What are the common lead times and MOQ?

Lead times are generally 30‑45 days after order confirmation; minimum order quantities typically start at 10 000 units per size, though exact figures depend on the selected style and volume.

How are the cups shipped internationally?

Export shipments use standard Incoterms such as FOB from Indian ports or CIF to the buyer’s destination, with containers loaded in 20‑ft or 40‑ft sizes according to order volume.

Can I obtain a sample before ordering?

Yes, buyers can request a sample of each cup type to assess dimensions, coating quality and print fidelity before confirming a full purchase.