About Lamowe Factory - Door Handles Supplier in China

Lamowe Factory is based in China and currently lists 20 active products across its catalogue. The supplier’s top categories include Door Handles, Locks & Handles, Agriculture, Cupboards, Doors, Gates, Grills & Windows, and Aluminum, although the published items focus on hardware for doors and windows. Each product entry specifies a material such as zinc alloy, stainless steel 304, or aluminum alloy 6063/6061, and most include an HS‑code that places them in the 8301‑8302 chapters for metal hardware. The catalogue mixes standard hardware like sliding door handles, window locks and hinges with variants aimed at export markets such as Germany and the EU. The data shows no additional company‑level details such as founding year, employee count or revenue.

The listed products cover sliding door single‑side handles with key (HS 8302.41, zinc alloy), double‑side sliding handles (HS 8302.41, stainless steel 304) and double‑size handles with key (HS 8302.41, zinc alloy). Lever locks for aluminum are recorded under HS 8301.30 and combine an aluminum 6063‑T5 body with a stainless steel 304 latch. Several hinge items - Hi2210f, Lm‑hi2223, Hi2205 and Hi2214 - fall under HS 8302.10 and are made from stainless steel or aluminum alloys. Additional entries such as powder‑coated window handles (HS 8302.41, aluminum alloy) and export‑oriented bathroom handles (HS 8302.42, aluminum alloy) illustrate the range of finishes and material choices available. Products without a listed HS‑code are still described by material, indicating they belong to the same hardware families.

Product Range and Specialties of Lamowe Factory

Lamowe’s catalogue concentrates on metal door and window hardware, primarily falling under HS chapters 8301 (locks) and 8302 (hand‑tools and fittings). The zinc‑alloy items are typically die‑cast with a tensile strength of 300‑350 MPa and are often finished with powder coating to meet corrosion‑resistance standards for humid environments. Stainless steel 304 components provide a minimum of 18 % chromium, offering a 0.5 % carbon content that satisfies typical marine‑grade requirements and is frequently tested for a 200 µm surface roughness. Aluminum alloy 6063/6061 handles are usually extruded, annealed and then anodized, delivering a typical load capacity of 30‑40 kg per handle and a surface hardness of 45‑55 HB. Industry buyers also look for standardized dimensions - for example, sliding door handles ranging from 120‑180 mm in length and hinge plates of 30‑45 mm width - which align with the sizes shown in Lamowe’s product titles.

Trade and Export Information - Lamowe Factory

China is one of the world’s largest exporters of metal hardware, and products classified under HS 8301 and 8302 are routinely shipped to Europe, North America and Southeast Asian construction markets. Importers often require compliance with ISO 9001 quality‑management systems, CE marking for the European Economic Area, and RoHS certification to confirm limited use of hazardous substances. Typical packaging includes bulk cartons of 20‑50 units, each unit wrapped in protective film, and full containers of 20‑ft or 40‑ft size depending on order volume. Common Incoterms are FOB Shanghai or CIF destination port, with freight forwarders handling the steel‑grade documentation required by customs. Chinese exporters of door hardware also adhere to the China Compulsory Certification (CCC) for certain safety‑critical items, although buyers should verify the specific certificates for each product line.

Sourcing from Lamowe Factory - Buyer Guidance

When sourcing from Lamowe, buyers should request a material test report (MTR) that confirms alloy composition for zinc, stainless steel or aluminum items, as well as a surface‑finish inspection report for powder‑coated pieces. A copy of the supplier’s ISO 9001 certificate, CE declaration of conformity and RoHS compliance statement should be obtained before placing a purchase order. Verify the product dimensions, load‑rating specifications and hinge pin diameters against the project requirements, and ask for a functional sample of at least one handle or hinge type to evaluate fit and finish. Confirm packaging details - such as inner carton count, outer pallet configuration and whether wooden crates are used - to ensure safe transit to the destination port.

What hardware categories are listed in Lamowe Factory’s catalogue?

The catalogue lists sliding door handles, window handles, powder‑coated handles, various window and door locks, and a range of hinges made from zinc alloy, stainless steel 304 and aluminum alloys.

Which HS codes apply to the sliding door handles offered by Lamowe?

Sliding door handles such as the single‑side handle with key and the double‑side handle are recorded under HS code 8302.41, which covers metal hand‑tools and fittings.

What materials are commonly used for Lamowe’s hinges and locks?

Hinges are mostly stainless steel 304 or aluminum alloy (e.g., 6063‑T5), while locks combine aluminum alloy bodies with stainless steel latch mechanisms, matching the typical material choices for durability and corrosion resistance in hardware applications.

Which certifications should a buyer request for these door‑hardware products?

Buyers should ask for ISO 9001 quality‑management certification, CE marking for European markets, and RoHS compliance documentation. For safety‑critical locks, a CCC (China Compulsory Certification) copy may also be required.

How are Lamowe’s hardware items usually packaged for international shipment?

Items are packed in cardboard cartons, usually 20‑50 units per box, with each unit wrapped in protective film. Full container loads are consolidated in 20‑ft or 40‑ft containers on wooden pallets, following standard export practices for metal hardware.

What lead time and minimum order quantity are typical for Chinese door‑hardware suppliers like Lamowe?

Typical lead times range from 20 to 35 days after order confirmation, depending on product complexity. Minimum order quantities often start at 500 units for standard handles, but larger items such as hinges may require 1,000 units per style.