About Inter Sourcing International LLC - Cushions & Pillows Supplier in United States

Inter Sourcing International LLC is based in the United States and currently lists nine active products across its catalogue. The catalogue covers four top categories - Cushions & Pillows, Bed Linens & Sheets, Printing Paper and Blankets - and includes items such as A4 printing paper, a premium goose‑down comforter (HS 9404.90), a sateen down‑alternative comforter (HS 9404.40), a brushed microfiber blanket (HS 6301.40) and four memory‑foam pillow or cushion variants, all classified under HS 9404.90. Each bedding item specifies its core material, for example white goose down with a 500‑thread‑count cotton cover or 100 % cotton sateen shell with polyester fill. The memory‑foam products are described by their visco‑elastic polyurethane composition and cover fabrics of cotton or polyester. The paper entry is listed without an HS code but is identified simply as A4 printing paper.

The supplier’s product set reflects typical B2B bedding and paper offerings that require precise specification. The comforters and blankets are grouped under Chapter 94 of the HS system, which governs furniture and bedding, while the blanket falls under Chapter 63 for textile articles. The A4 paper, though lacking an HS code in the data, would normally be classified under Chapter 48 (paper and paperboard). All nine items are presented with material details that allow buyers to match required performance standards such as down fill power, thread count, fabric GSM, or foam density.

Product Range and Specialties of Inter Sourcing International LLC

The catalogue lists one paper product (A4 size) and eight textile or foam items. The premium goose‑down comforter combines white goose down with a down‑proof cotton cover of 500 thread count, a specification commonly associated with high‑grade down products that target ICUMSA 45‑50 purity and fill powers above 600 cu in. The sateen down‑alternative comforter uses a 100 % cotton sateen shell, which typically has a fabric weight of 150‑180 g/m² and a polyester fill that is measured by grams per square metre. The brushed microfiber blanket is made from polyester microfibers, a material that often meets a GSM range of 250‑350 and may be treated for anti‑pilling. The memory‑foam pillows and cushions are described as visco‑elastic polyurethane foam; industry standards usually specify densities between 30 - 45 kg/m³ for cervical pillows and 25 - 35 kg/m³ for seat cushions, with cover fabrics ranging from 200‑250 g/m² cotton to polyester blends.

Trade and Export Information - Inter Sourcing International LLC

United States exporters of bedding and paper typically ship to North America, Europe and the Middle East, where demand for premium down, down‑alternative and memory‑foam products remains strong. HS 9404.90 and 9404.40 items are subject to textile import regulations that often require compliance with Oeko‑Tex Standard 100, ISO 9001 quality management and, for down products, the Responsible Down Standard (RDS) verification. Blankets under HS 6301.40 are commonly inspected for fire‑retardant performance according to NFPA 701 or the EU Carrying‑Out‑of‑the‑Regulation 305 standards. A4 printing paper, classified under HS 4802.56, is usually sourced with FSC or PEFC certification to demonstrate sustainable forest management. Typical packaging includes bulk cartons of 20‑40 kg for paper, and poly‑bagged or box‑packed units for bedding, with container loading based on 20‑ft or 40‑ft standards. Incoterms such as FOB or CIF are frequently used for these product families, with freight forwarders handling palletized loads for the heavier comforters and blankets.

Sourcing from Inter Sourcing International LLC - Buyer Guidance

When evaluating Inter Sourcing International LLC’s bedding line, buyers should request specific test reports: down fill power and purity certificates for the goose‑down comforter, thread‑count verification and fabric GSM for the sateen shell, and polyester fill weight for the down‑alternative items. For memory‑foam products, density measurements (kg/m³), compression set values and cover fabric content should be confirmed through lab reports. Paper buyers should ask for FSC/PEFC chain‑of‑custody certificates and ISO 9001 compliance documentation. In addition, request the supplier’s Oeko‑Tex or similar textile safety certificates, especially if the end market imposes chemical‑restriction standards such as REACH. Verify packaging dimensions, container load plans and lead times before placing a purchase order to avoid mismatches in freight planning.

What HS codes are used for the bedding products listed by Inter Sourcing International LLC?

The premium goose‑down comforter and all memory‑foam pillows or cushions are classified under HS 9404.90, the sateen down‑alternative comforter uses HS 9404.40, and the brushed microfiber blanket falls under HS 6301.40.

Which material specifications should buyers verify for the goose‑down comforter?

Buyers should obtain the down fill power (typically ≥ 600 cu in), ICUMSA 45‑50 purity level, and confirmation that the cotton cover meets the stated 500‑thread‑count specification.

What typical certifications are expected for US‑origin bedding products?

Commonly required certifications include Oeko‑Tex Standard 100 for textile safety, ISO 9001 for quality management, and the Responsible Down Standard (RDS) for down‑filled items.

How is the down‑alternative fill in the sateen comforter measured?

The polyester fill is usually quantified by grams per square metre (g/m²) and should be matched to the buyer’s warmth‑performance requirements, often ranging from 200‑300 g/m² for medium‑weight comforters.

What density range is standard for memory‑foam cervical pillows?

Industry standards place cervical‑pillow foam density between 30 kg/m³ and 45 kg/m³, with a compression set below 15 % after 24 hours.

What documentation is advisable to request for the A4 printing paper?

Buyers should ask for FSC or PEFC chain‑of‑custody certificates, ISO 9001 compliance, and the paper’s basis weight (e.g., 80 g/m²) to ensure it meets printing specifications.

What packaging format is typical for the memory‑foam seat cushion?

Memory‑foam seat cushions are usually packed in sealed poly‑bags within corrugated cartons that fit standard 20‑ft container pallets, with each unit weighing approximately 2‑3 kg.

Which Incoterms are most frequently used for these US‑based export items?

Suppliers often quote FOB (Free on Board) at a US port or CIF (Cost, Insurance, Freight) to the buyer’s destination, depending on the buyer’s logistics preferences.