About Inex Llc. - Flanges Supplier in Azerbaijan

Inex Llc. operates from Azerbaijan and lists 16 active products across its catalogue. The portfolio includes plastic piping solutions such as single‑layer corrugated HDPE pipes (HS 3917.31), PE‑100 pipes, winding HDPE pipes (HS 3917.21), and manhole bodies (HS 3917.40). Metal and composite fittings are represented by stainless‑steel and carbon‑steel welded fittings (HS 7307.29), ductile‑iron flange adaptors (HS 7307.19), and injected carbon‑steel or stainless‑steel fittings (HS 7307.91). The company also offers polypropylene items like PPR pipes (HS 3917.23), three‑layer fiberglass‑reinforced PPRC (HS 3917.40), and PPH sewage pipes (HS 3917.21).

Additional catalogue entries cover HDPE stadium seating (HS 9401.79), HDPE drop‑irrigation pipes (HS 3917.21), and polypropylene PPRC reinforced with fiberglass (HS 3917.40). Thermoformed fittings made from PVC, PP or ABS are listed under HS 3917.40, while the product set also includes plastic crates and agricultural handling equipment that lack specific HS codes in the data. The range therefore spans polymeric pipe systems, metal and composite fittings, and ancillary plastic goods for construction and agriculture. Folding tables and chairs are also mentioned, indicating a broader focus on lightweight plastic furniture.

Product Range and Specialties of Inex Llc.

The catalogue lists HDPE pipe variants such as single‑layer corrugated (HS 3917.31) and winding pipes (HS 3917.21) that in the industry conform to ISO 4427 and are commonly supplied in pressure classes DN 40 - DN 630 with a minimum wall thickness of 2 mm. PE‑100 material meets the EN 12201‑2 standard for high‑density polyethylene used in water and gas distribution, and manufacturers usually provide a melt flow index between 0.2 - 0.5 g/10 min. Polypropylene PPR pipes (HS 3917.23) are typically produced to ISO 15874, offering temperature resistance up to 95 °C and pressure ratings up to PN 16. Fiberglass‑reinforced PPRC combines a PPR matrix with 30 % glass fibre, delivering a higher modulus that meets ASTM D638 tensile requirements. Metal fittings listed under HS 7307 are generally fabricated to ASTM A105 for carbon steel and ASTM A240 for stainless steel 304/316, with dimensions matching DIN 770/EN 1092‑1 flange standards. Thermoformed PVC/PP/ABS fittings follow EN 1452 for pressure pipe systems, and welded steel fittings are often supplied with a mill‑test report confirming chemical composition and hardness.

Plastic crates for agricultural products are usually injection‑moulded from HDPE with a typical weight of 0.8 kg per crate and comply with ISPM 15 phytosanitary treatment when exported. Stadium seats made from HDPE meet fire‑safety standards such as EN 13501‑1 Class B, and folding tables and chairs are often produced to a 1500 mm × 750 mm × 750 mm footprint with a payload of 120 kg.

Trade and Export Information - Inex Llc.

Azerbaijan’s polymer pipe and fitting manufacturers primarily serve markets in the CIS region, the Middle East, and the EU, where demand for water‑distribution and irrigation infrastructure drives imports of HDPE and PPR systems. The HS 3917 family (plastic pipes and fittings) is subject to customs checks for compliance with EN 1329 and often requires a Certificate of Conformity or CE marking for EU destinations, while the HS 7307 metal‑fitting category usually demands mill test reports and, for stainless steel, a 316L certification to meet corrosion‑resistance specifications. Export shipments are typically loaded in 20‑ft or 40‑ft containers on wooden pallets, with pipe bundles wrapped in PE film to prevent damage, and are quoted on FOB Baku or CIF Mediterranean ports. Buyers importing stadium seating or agricultural crates also need to verify ISPM 15 treatment for wood pallets and may request fire‑safety test reports for HDPE seating that comply with EN 13501‑1. Lead times for polymer pipe orders from Azerbaijan range from 30 to 60 days depending on production scheduling and required testing documentation.

Sourcing from Inex Llc. - Buyer Guidance

When sourcing HDPE or PPR pipe systems from Inex Llc., buyers should request the latest ISO 9001 quality‑management certificate, material test certificates confirming melt flow index and density, and pressure‑test reports that demonstrate compliance with ISO 4427 or ISO 15874. For metal fittings, a mill‑test report showing chemical composition, tensile strength, and hardness, together with a conformity declaration to ASTM A105 or ASTM A240, is standard practice. Samples of pipe sections (e.g., 1 m length) and fitting prototypes can be requested to verify dimensions, socket design, and surface finish before finalizing an order. Verify that packaging will protect pipe ends with end caps or foam and that containers are sealed with moisture‑resistant film, especially for long‑haul sea freight. Typical minimum order quantities are 500 kg for HDPE pipe coils and 1 ton for metal fittings, with production lead times of 4 - 8 weeks once all required certifications are confirmed.

What types of plastic pipes does Inex Llc. offer and under which HS codes?

Inex Llc. lists single‑layer corrugated HDPE pipes (HS 3917.31), winding HDPE pipes and drop‑irrigation pipes (HS 3917.21), manhole bodies (HS 3917.40), PPR pipes (HS 3917.23), and three‑layer fiberglass‑reinforced PPRC (HS 3917.40). All items are manufactured from HDPE, PP, or PPR materials in accordance with the relevant ISO pipe standards.

Which metal fittings are included in the catalogue and what standards apply?

The company provides welded fittings made of stainless‑steel 304/316 or carbon steel ASTM A105 (HS 7307.29), ductile‑iron flange adaptors (HS 7307.19), and injected carbon‑steel or stainless‑steel fittings (HS 7307.91). These products are typically supplied with mill‑test reports meeting ASTM A105 or ASTM A240 specifications.

Are there certifications that buyers should verify for the polymer products?

Buyers should ask for an ISO 9001 quality‑management certificate, material test certificates indicating melt flow index and density, and pressure‑test reports confirming compliance with ISO 4427 (HDPE) or ISO 15874 (PPR). For EU shipments, a CE‑type conformity declaration may also be required.

What packaging and shipping methods are used for the pipe products?

Pipes are usually coiled or bundled, wrapped in polyethylene film, and palletised on standard 1200 mm × 1000 mm wooden pallets. Shipments are loaded in 20‑ft or 40‑ft containers and quoted on FOB Baku or CIF Mediterranean ports.

What are the typical minimum order quantities and lead times?

Minimum order quantities are generally 500 kg for HDPE pipe coils and 1 ton for metal fittings. Production lead time ranges from 30 to 60 days after receipt of approved samples and required test documentation.

Can buyers obtain samples of the fittings or pipe sections?

Inex Llc. can provide sample lengths of 1 m for pipe types and individual fitting units for dimensional verification, usually shipped under a prepaid DAP term.

How are stadium seats and agricultural crates classified for export?

Stadium seats are classified under HS 9401.79 and are typically made from HDPE that meets fire‑safety standard EN 13501‑1. Plastic crates for agricultural products are classified under the generic HS 3923 heading and are treated according to ISPM 15 when exported on wooden pallets.