About Hidayat export - Furniture Supplier in Indonesia

Indonesia, Jawa Tengah region, hosts Hidayat export with an active catalogue of seven distinct products. The list includes Old teak wood (HS 970) identified as teak wood, a Carved front item (HS 9403.60) made from solid Mahogany (Khaya spp.), and an Antique Victorian bed (HS 9403.50) also in solid Mahogany. Additional entries are a Standing tray garden furniture piece, an Executive partner desk, a Gazebo structure, and a 3‑seater sofa, which are presented without explicit HS codes. The supplier’s top categories span Dining Set, Tables, Chairs & Sofa, Tableware, Cabinets, Garden & Outdoor Furniture, Office Furniture, Beds, and Wooden Furniture, indicating a broad furniture focus. All products are described using the material names and HS‑code families supplied in the catalogue.

Product Range and Specialties of Hidayat export

The catalogue shows solid wood items such as teak and Mahogany, both commonly graded for moisture content below 12 % and classified as grade‑A or grade‑B depending on grain pattern and defect count. In the wooden furniture sector, buyers often specify ISO 9001 quality management, FSC chain‑of‑custody certification, and compliance with ISPM 15 for any wood packaging. Typical dimensions for teak panels range from 2 m × 0.5 m to 3 m × 0.6 m, while Mahogany furniture components are frequently produced in thicknesses of 20 - 30 mm for structural stability. The garden‑type pieces such as the standing tray and gazebo are usually finished with outdoor‑grade varnish meeting ASTM D-4236 for low VOC emissions. Sofa and desk items are often upholstered or laminated in accordance with EN 10204 material certification standards.

Trade and Export Information - Hidayat export

Indonesia is a major exporter of solid wood furniture, with primary markets in the United States, European Union, the Middle East, and Southeast Asian countries. HS chapter 94 (e.g., 9403.50, 9403.60) covers furniture of wood, while HS 97 is used for antiques and works of art, which applies to the Old teak wood entry. Importers typically require phytosanitary certificates under ISPM 15, as well as compliance with destination‑country regulations such as the EU REACH chemical safety framework or the US Lacey Act declaration for protected species. Standard export packaging includes crate‑lined pallets, moisture‑controlled containers, and 20‑ft or 40‑ft containers with a loading capacity of up to 23 metric tons for solid wood items. Incoterms most frequently used are FOB Jakarta Port and CIF destination ports, allowing buyers to manage freight and insurance according to their preferences.

Sourcing from Hidayat export - Buyer Guidance

Buyers should request material test reports confirming species identification, moisture content, and dimensional tolerances for teak and Mahogany items. FSC or equivalent forest‑origin certificates, along with a phytosanitary clearance, are standard documents that should be verified before contract finalisation. Samples of finished surface treatments are advisable to assess colour consistency and durability, especially for outdoor furniture that must meet UV‑resistance standards such as ASTM D-4329. Minimum order quantities often start at one 20‑ft container (approximately 10 - 12 cubic meters of solid wood furniture), with typical production lead times of 30 - 45 days after sample approval. Packaging specifications normally include sealed, moisture‑proof crates and palletisation that complies with ISPM 15 to avoid treatment delays at port of entry.

What types of wood does Hidayat export list in its catalogue?

The catalogue lists Old teak wood identified under HS 970 and solid Mahogany wood (Khaya spp.) for the Carved front and Antique Victorian bed items, both classified under HS 9403.60 and 9403.50 respectively.

Are HS codes provided for all listed products?

HS codes are supplied for three items: Old teak wood (970), Carved front (9403.60) and Antique Victorian bed (9403.50). The remaining four products are listed without HS codes in the source data.

Which certifications should a buyer request for solid wood furniture from Indonesia?

Buyers typically request FSC chain‑of‑custody certification, ISO 9001 quality management documentation, and a phytosanitary certificate complying with ISPM 15 for any wood packaging.

What are the common moisture content limits for teak and Mahogany furniture?

Industry standards usually require moisture content below 12 % for both teak and Mahogany to prevent warping and ensure dimensional stability during shipping.

What packaging and container sizes are standard for these furniture items?

Standard export packaging uses sealed wooden crates on ISPM 15‑treated pallets, loaded into 20‑ft or 40‑ft containers with a typical payload of up to 23 metric tons for solid wood furniture.

What lead time should a buyer expect for an order of a 3‑seater sofa?

After sample approval, production and preparation for shipment generally take 30 to 45 days, depending on order size and any required finishing treatments.

Which markets commonly import Indonesian solid wood furniture?

The United States, European Union member states, Middle Eastern countries such as the UAE, and regional Asian markets are the primary import destinations for Indonesian wooden furniture.

What documentation is needed to comply with EU REACH when importing these goods?

Importers should obtain a REACH compliance statement from the supplier, confirming that the wood finishes and adhesives used do not contain substances of very high concern (SVHC) above the regulatory thresholds.