About Hebron Engineering - Fasteners Supplier in India

India hosts Hebron Engineering, which currently lists eight distinct products in its catalogue. The items span the top categories of Fasteners, Automobile Gears, Shafts & Clutches, Flanges, and Metal Castings & Forgings, each identified by a specific HS‑code family. The catalogue includes both cold‑forged fasteners and a range of forged or cast components made from alloy steel, carbon steel, stainless steel, phosphor bronze, brass and cast iron. All products are classified under HS chapters 72, 73 and 84, reflecting their status as steel or iron articles and mechanical parts.

The eight catalogue entries are: Forging Flange/Gear/Shaft (HS 7326.19, alloy or carbon steel); Connecting Rod - Forging (HS 8409.99, forged alloy steel 4340 or carbon steel 1045/4140); Casting Flange (HS 7307.21, stainless steel 304/304L); Bush Machining (HS 8483.30, phosphor bronze, brass or carbon steel); Casting Top Cover (HS 7325.10, grey or ductile cast iron); Forging Inner Rings (HS 7207.19, carbon steel C45 or alloy steel 4140); Fasteners Cold Forging (HS 7318.15, carbon steel grades 8.8, 10.9, 12.9 or stainless steel 304/316); Fasteners (HS 7318.15, stainless steel 304 or various carbon‑steel grades).

Product Range and Specialties of Hebron Engineering

The catalogue covers typical automotive and machinery components. Fasteners are offered in ISO 898‑1 grades 8.8, 10.9 and 12.9 for carbon steel and in stainless grades 304/316, which meet common corrosion‑resistance specifications for engine and chassis applications. Forged shafts, gears and connecting rods use alloy steels such as Cr‑Mo 4340 or 4140, materials that satisfy ASTM A322 or EN 10217 strength and toughness requirements. Castings include stainless 304/304L flanges, which align with ASTM A240, and cast iron top covers that meet EN 1563 for grey or ductile iron. Bushings machined from phosphor bronze or brass provide typical wear‑resistance and conductivity values (Cu > 80 %, Pb < 0.1 %).

Trade and Export Information - Hebron Engineering

India is a major exporter of steel forgings, castings and fasteners, supplying automotive, heavy‑machinery and infrastructure sectors in Europe, North America, the Middle East and Southeast Asia. HS chapter 73 items such as flanges and forged shafts are often shipped in 20‑ft or 40‑ft containers with protective wood pallets and moisture‑resistant film, while HS chapter 84 components like connecting rods may be packed in bulk steel crates. Buyers typically request ISO 9001 certification, mill test certificates and, where applicable, CE marking for parts entering the EU market. Common Incoterms used by Indian manufacturers include FOB Mumbai or CIF Dubai, reflecting the country’s well‑developed port infrastructure and logistics networks.

Sourcing from Hebron Engineering - Buyer Guidance

When sourcing from Hebron Engineering, request a Mill Test Certificate (MTC) that confirms chemical composition and mechanical properties for each alloy or stainless grade. For fasteners, buyers should verify compliance with ISO 898‑1 and request a hardness test report (Rockwell or Vickers) matching the stated grade (e.g., 8.8 ≈ HR B 140). Samples of forged shafts or connecting rods are usually supplied in standard lengths for dimensional inspection; confirm the supplier can provide a 3‑month validity test report for tensile strength and impact energy. Typical minimum order quantities range from 5 tonnes for standard fasteners to 10 tonnes for custom forged components, with lead times of 30‑45 days after final drawing approval.

What HS codes are associated with Hebron Engineering’s fastener products?

Both fastener listings use HS code 7318.15, which covers other threaded fasteners of iron or steel, including carbon‑steel grades 8.8, 10.9, 12.9 and stainless‑steel 304/316.

Which material standards apply to the forged connecting rods?

The connecting rods are forged from alloy steel 4340 or carbon steels 1045/4140 and typically conform to ASTM A322 for forged steel fittings, with heat‑treatment to achieve the specified tensile strength.

Are mill test certificates available for the cast iron top covers?

Yes, mill test certificates for cast iron (grey or ductile) under HS 7325.10 can be provided, showing compliance with EN 1563 limits for tensile strength and elongation.

What are the typical packaging methods for the flange castings?

Flange castings (HS 7307.21) are usually packed in wooden crates with internal bracing and a moisture‑resistant film, then palletised for container loading.

Which certifications should an international buyer request before purchase?

Buyers should request ISO 9001 quality‑management certification, relevant material standards (e.g., ASTM, EN), and any regional conformity marks such as CE for EU shipments.

What is the standard lead time for a custom‑machined bush?

Custom‑machined bushes (HS 8483.30) typically require 30‑45 days from receipt of final drawing, including machining, heat‑treatment and final inspection.

Can sample pieces be obtained for the forged inner rings?

Sample pieces of forged inner rings (HS 7207.19) can be supplied in standard dimensions for hardness and dimensional checks before a full order is placed.

What are the common incoterms used for shipping these steel products?

Freight terms most often used are FOB from Indian ports such as Mumbai or Chennai, and CIF to destination ports in Europe or the Middle East, depending on the buyer’s logistics preference.