About Hebei Lantan Import And Export Co., Ltd. - Pipe Supplier in China

China is the origin country of Hebei Lantan Import And Export Co., Ltd., which lists 20 active pipe products in its catalogue. The catalogue spans several HS‑code families, primarily 3917.21 for polyethylene and PVC‑U pipes, 3917.23 for polypropylene‑based and FR‑P pipes, 3917.39 for other modified polypropylene, and 7304.51 for hot‑dipping steel pipe with polymer coating. The supplier’s top categories include flanges, plastic items and steel pipes, but the majority of listed items are plastic and composite piping solutions. Products cover water supply, drainage, irrigation and industrial power transmission applications. Each entry specifies the base material such as HDPE, PVC‑U, PP‑R, MPP or glass‑fiber reinforced polyester.

The product list includes a polyethylene double‑wall corrugated pipe, PVC‑U water supply and drain pipes, PP‑R pipe, MPP electric power pipe, FRP pipe, hot‑dipping plastic steel pipe, HDPE water supply pipe, PVC‑U irrigation pipe, HDPE winding‑reinforced (Carat) pipe, HDPE silicone core pipe, PVC grid pipe, polybutylene (PB) pipe and fittings, HDPE honeycomb pipe, MPP single‑wall corrugated pipe, PE‑RT pipe and fittings, PE composite pipe with steel wire mesh, and PVC square pipe. Materials range from HDPE PE‑80/PE‑100 to health‑grade PVC‑U resin, PP‑R random copolymer, and carbon steel grades Q195‑Q345 with polymer coating. The catalogue therefore covers both smooth and corrugated profiles, reinforced and non‑reinforced designs, and pressure classes commonly used in municipal and industrial water distribution.

Product Range and Specialties of Hebei Lantan Import And Export Co., Ltd.

Hebei Lantan’s catalogue features HDPE pipes such as PE‑80, PE‑100 and PE‑RT, which in the industry are supplied to ISO 4427 and ASTM D3035 specifications with pressure ratings from PN 0.6 MPa up to PN 16 MPa. PVC‑U water and irrigation pipes are typically produced to health‑grade resin standards, conforming to ISO 1452 and EN 1329 for pressure classes PN 0.6‑PN 10. PP‑R and MPP pipes are commonly graded to ISO 4427‑2 and meet impact resistance requirements of ≥ 30 J at 23 °C. FRP pipes use glass‑fiber reinforced unsaturated polyester resin and are often classified under EN 1463 for chemical‑resistant applications. The hot‑dipping steel pipe (HS 7304.51) combines carbon steel grades Q195‑Q345 with an HDPE coating, a construction that satisfies ASTM A53 for the steel core and ISO 14692 for the polymer coating.

Typical dimensions for these products range from DN 20 mm to DN 1200 mm, with wall thicknesses expressed as SDR (Standard Dimension Ratio) 7 to 17 for HDPE and PVC‑U. Corrugated variants are supplied in standard lengths of 3 m, 4 m or 6 m and are often bundled in 20‑ft or 40‑ft containers with protective film. Reinforced variants such as the HDPE winding‑reinforced (Carat) pipe or PE composite pipe with steel wire mesh achieve higher burst pressures, frequently exceeding 20 MPa, and are used in high‑load or high‑temperature installations.

Trade and Export Information - Hebei Lantan Import And Export Co., Ltd.

China is a major exporter of plastic and coated steel piping, with the majority of shipments destined for Southeast Asia, the Middle East, Africa and Latin America. The HS‑code 3917.21 family covers most PE and PVC‑U pipes, while 3917.23 includes PP‑R, MPP and FRP variants; 3917.39 is used for other modified polypropylene products, and 7304.51 applies to hot‑dipped steel pipe with polymer coating. Importing countries typically require compliance with ISO 9001 quality management, ISO 14001 environmental management, and product‑specific standards such as ISO 4427 for water‑grade HDPE or EN 1329 for PVC‑U pressure pipes. CE marking or NSF certification is often requested for potable‑water applications.

Logistically, the pipes are packed in bundles or pallets suitable for 20‑ft and 40‑ft containers, with moisture‑resistant film to prevent deformation. Common Incoterms used by Chinese pipe exporters include FOB Tianjin or CIF Dubai, depending on the buyer’s preferred destination port. Chinese customs inspection (CIQ) and third‑party laboratory testing are standard pre‑shipment steps, providing material test reports and dimensional inspection certificates that align with the buyer’s import regulations.

Sourcing from Hebei Lantan Import And Export Co., Ltd. - Buyer Guidance

Buyers should request a Material Data Sheet (MDS) and a recent test report covering tensile strength, impact energy, hydrostatic pressure test and dimensional tolerance for each pipe type. For HDPE and PVC‑U water‑grade pipes, verification against ISO 4427 or EN 1329 is essential, while FRP and MPP pipes should be checked for compliance with EN 1463 and relevant chemical‑resistance tests. Confirm that the HS code on the commercial invoice matches the declared material to avoid customs rejections.

Samples of the intended diameter and wall thickness are advisable before full‑scale orders; most suppliers provide a 1‑m sample at a nominal charge. Verify the presence of any required certifications such as ISO 9001, CE, NSF or local water‑safety approvals. Typical lead times for production and packaging range from 30 to 45 days, and minimum order quantities are often expressed in container loads - approximately 12 tons for a 20‑ft container of HDPE pipe or 8 tons for PVC‑U grid pipe.

What pipe materials are included in Hebei Lantan’s catalogue?

The catalogue lists pipes made from high‑density polyethylene (HDPE/PE‑80/PE‑100), health‑grade PVC‑U, polypropylene random copolymer (PP‑R), modified polypropylene (MPP), glass‑fiber reinforced polyester (FRP), polybutylene (PB) and carbon steel (Q195‑Q345) with an HDPE coating.

Which HS codes correspond to the listed pipe products?

Plastic pipes such as HDPE, PVC‑U and PE‑RT are classified under HS 3917.21 or 3917.23, modified polypropylene under 3917.23 or 3917.39, FRP pipe under 3917.23, and the hot‑dipping steel pipe with polymer coating under HS 7304.51.

What international standards apply to the HDPE water‑supply pipes?

HDPE water‑supply pipes typically conform to ISO 4427 (water‑grade polyethylene pipe) and ASTM D3035, with pressure classes expressed as PN 0.6 MPa to PN 16 MPa and SDR 7‑17 for dimensional control.

How can I obtain a sample of a specific pipe type?

Buyers can request a 1‑meter sample of the desired diameter and wall thickness by submitting a sample request through the supplier’s trade platform; the sample is usually shipped in a small parcel and may incur a nominal handling fee.

Which certifications should I ask for when sourcing PVC‑U irrigation pipes?

Request the Material Data Sheet, a recent test report, and confirmation of compliance with ISO 1452, EN 1329 and any local potable‑water certification such as NSF or CE marking.

What are the typical minimum order quantities and packaging for these pipes?

Orders are generally measured in container loads; a 20‑ft container can hold roughly 12 tons of HDPE pipe (about 1 000 m of DN 200) or 8 tons of PVC‑U grid pipe. Pipes are bundled, palletised and wrapped in moisture‑resistant film.

Which regions are the main import markets for Chinese pipe products like those offered by Hebei Lantan?

The main import destinations are countries in Southeast Asia, the Middle East, East Africa and Latin America, where municipal water, irrigation and industrial power‑distribution projects frequently source Chinese‑manufactured plastic and coated‑steel pipes.