About Guangzhou Baitang Medical Instrument Co., Ltd. - Medical Instruments Supplier in China

Guangzhou, China hosts Guangzhou Baitang Medical Instrument Co., Ltd., which lists 15 active products across categories such as Agriculture, Surgical Equipments & Disposables, Medical Scissors, Silicon, Orthopedic Equipments & Implants, Titanium and Cosmetics & Beauty Parlour Equipments. The catalogue includes items ranging from LED surgical headlights to silicone facial implants and titanium eyelid devices, with two entries recorded under HS code 9018.90 for medical instruments that are not otherwise classified. Each product entry specifies material composition where available, for example the titanium double‑eyelid device uses Surgical Titanium (Ti‑6Al‑4V Grade 5). The supplier’s portfolio therefore spans both electromechanical devices and implantable polymer or metal components used in aesthetic and reconstructive procedures.

The product set features a Medical Led Headlight With Battery, an Electric Liposuction Machine For Fat Grafting, multiple Fat Transfer Cannula sets, a Vacuum Liposuction Aspirator, a Nano Fat Transfer Set, Silicone Ocular Shield With Suction Cup, Thermoplastic External Nasal Splint, Rhinoplasty Apparatus Kit, Chin Augmentation Silicone Implants, Carvable Silicone Blocks, a Titanium Double Eyelid Device, an Electric Vibration Device For Liposuction, a Xenon Fiber Cold Light Source, a Silicone Forehead Implant and Silicone Malar Implants. Materials include medical‑grade silicone, stainless steel 304, ABS plastic, and surgical titanium, reflecting the mix of disposable and reusable devices common in modern surgical practice.

Product Range and Specialties of Guangzhou Baitang Medical Instrument Co., Ltd.

The catalogue concentrates on aesthetic and reconstructive surgical tools. LED headlights typically deliver 450‑600 lumens with colour temperatures around 5600 K, while xenon fiber cold light sources provide high intensity illumination for microsurgery. Fat‑transfer liposuction equipment is usually supplied with cannulas of 2‑4 mm outer diameter and vacuum pressures up to 600 mm Hg. Silicone facial implants are cast in Shore A 30‑50 hardness blocks and are available in volumes from 0.5 ml up to 3 ml for chin or malar augmentation. The titanium double‑eyelid device is fabricated from Ti‑6Al‑4V Grade 5, a material meeting ASTM F136 standards for implantable alloys. Electrical vibration devices for liposuction often combine a stainless‑steel 304 housing with medical‑grade silicone seals to ensure biocompatibility and durability.

Trade and Export Information - Guangzhou Baitang Medical Instrument Co., Ltd.

China is a major exporter of medical devices classified under HS chapter 90, with the 9018.90 sub‑heading covering a broad range of surgical instruments and accessories. Typical import destinations for Chinese aesthetic‑surgery equipment include the United States, European Union members, Japan and Southeast Asian markets such as Singapore and Malaysia. Buyers usually require conformity to ISO 13485 quality‑management systems, CE marking for the EU and, where applicable, FDA 510(k) clearance for the US. Export shipments are commonly packed in sealed, sterilizable containers - often bulk boxes of 20 ft or 40 ft containers with temperature‑controlled interiors for light‑sensitive items. Documentation normally includes a commercial invoice, packing list, certificate of origin, and a Declaration of Conformity referencing the relevant standards.

Sourcing from Guangzhou Baitang Medical Instrument Co., Ltd. - Buyer Guidance

When sourcing from this supplier, request material test reports confirming the grade of silicone (e.g., Shore A hardness, tensile strength) and the alloy specification for titanium components (ASTM F136 compliance). Ask for a copy of the supplier’s ISO 13485 certificate and any CE Declaration of Conformity that applies to the specific device you intend to import. Verify that the LED and xenon light sources meet IEC 60601‑1 electrical safety standards and provide photometric data sheets. Samples of implantable silicone blocks or titanium devices should be supplied sterile, with sterility validation reports (e.g., ISO 11137 for radiation sterilization). Typical minimum order quantities for reusable devices range from 10 units to 100 units, with lead times of 30‑45 days after order confirmation and receipt of required certifications.

What HS code is used for the titanium double eyelid device?

The titanium double eyelid device is listed under HS code 9018.90, which covers other medical instruments not elsewhere specified.

Which material standards apply to the silicone facial implants?

Silicone facial implants are generally produced from medical‑grade silicone that complies with ISO 10993‑1 for biocompatibility and are often characterized by Shore A hardness between 30 and 50.

What certifications should a buyer request for the LED surgical headlight?

Buyers should ask for IEC 60601‑1 electrical safety certification, a CE Declaration of Conformity and, if exporting to the US, evidence of FDA 510(k) clearance.

Are the liposuction cannulas supplied sterile?

The catalogue does not state sterility; buyers should request a sterility validation report (ISO 11137) and packaging that maintains sterility until use.

What typical packaging is used for the silicone carving blocks?

Silicone carving blocks are usually packed in sealed, moisture‑resistant bulk boxes, often placed on pallets for 20 ft or 40 ft container loading.

What is the usual lead time for the electric vibration liposuction device?

Lead times for electromechanical devices from this supplier are typically 30‑45 days after order confirmation and receipt of required test reports.

Which material is used for the housing of the electric vibration device?

The housing combines stainless‑steel 304 for the handle and tubing with ABS plastic for the outer shell, and medical‑grade silicone seals for moving parts.

How can a buyer verify the titanium alloy grade?

Buyers should request an alloy certification that confirms the material meets Ti‑6Al‑4V Grade 5 specifications, referencing ASTM F136 or equivalent standards.