About Fujian Hengjie New Material Plastic Pipe Co., Ltd. - Flanges Supplier in China

China‑based Fujian Hengjie New Material Plastic Pipe Co., Ltd. lists five active products in its catalogue. The items are classified under HS code 3917.23 for plastic pipes and 3917.40 for plastic fittings, covering PPR pipe DN20 mm, HDPE PE100 pipe for gas distribution, HDPE PE100/PE80 pipe for water supply, and two PE100 fitting types (reducing tee and equal tee). Each product description includes the polymer grade - PPR Type 3, HDPE PE100 (GB/T 19472) or PE80 - and references to standards such as ISO 15874 and DIN 8077/8078. The supplier’s catalogue therefore spans both pipe and fitting families within the broader flange‑related market segment.

The catalogue focuses on polymeric pressure‑rating solutions used in water, gas and general utility networks. Products are specified by material grade (e.g., PE100, PE80, PPR) and by standard dimensions, such as DN20 mm for the PPR pipe. The fitting entries fall under HS 3917.40 and are described as PE100 reducing and equal tees, which are typical components for branch connections in pipe systems. All items are manufactured from high‑density polyethylene or polypropylene random copolymer, materials that meet the mechanical and chemical resistance requirements of municipal and industrial distribution networks.

Product Range and Specialties of Fujian Hengjie New Material Plastic Pipe Co., Ltd.

The five listed items comprise three pipe types - PPR pipe DN20 mm (ISO 15874), HDPE PE100 pipe for gas distribution, and HDPE PE100/PE80 pipe for water supply - plus two PE100 fittings (reducing tee and equal tee). In the global market, HDPE pipe for gas is commonly produced to ISO 4427‑2 or EN 12201 standards, with pressure classes ranging from PN 6 to PN 16 and SDR (standard dimension ratio) values of 7.2 to 11. The PPR pipe segment typically follows ISO 15874, offering temperature resistance up to 70 °C and pressure ratings up to PN 10. PE100 fittings are usually supplied with CE marking and conform to ISO 4437‑3, featuring butt‑fusion or electro‑fusion joint designs. Buyers often request data sheets that list dimensions, wall thickness, pressure class, and chemical resistance profiles for each grade.

Trade and Export Information - Fujian Hengjie New Material Plastic Pipe Co., Ltd.

China is one of the world’s largest exporters of plastic piping, with HS 3917.23 and 3917.40 products regularly shipped to Southeast Asia, the Middle East, Africa and parts of Europe. Importers generally require conformity to ISO, EN or ASTM standards and may request CE, ISO 9001 or RoHS documentation, although such certificates are not listed for this supplier. Typical packaging involves wooden pallets loaded in 20‑ft or 40‑ft containers, with moisture‑barrier films to protect the polymer surfaces. Common Incoterms are FOB Fujian or CIF destination port, and customs authorities often verify the HS code, material composition and compliance with local pipe‑installation regulations before clearance.

Sourcing from Fujian Hengjie New Material Plastic Pipe Co., Ltd. - Buyer Guidance

When sourcing from Fujian Hengjie, buyers should ask for the latest material test reports (e.g., melt flow index, tensile strength, impact resistance) and certification copies that demonstrate compliance with ISO 15874 for PPR or ISO 4427 for HDPE. Request dimensional inspection reports that confirm DN size, wall thickness and pressure class, as well as fusion‑procedure specifications for fittings. Verify the HS codes on the commercial invoice (3917.23 for pipes, 3917.40 for fittings) and confirm packaging details such as pallet configuration and container load plan before finalizing the order.

What polymer grades are offered for the HDPE pipe products?

The catalogue lists HDPE PE100 for gas distribution and a PE100/PE80 blend for water supply, both complying with the GB/T 19472 classification for high‑density polyethylene.

Which standard dimensions are available for the PPR pipe?

The PPR pipe is specified as DN20 mm and follows ISO 15874, which defines the nominal diameter and wall‑thickness tolerances for pressure‑rated polypropylene pipe.

Are the PE100 fittings compatible with standard fusion methods?

The reducing and equal tees are made from PE100 and are intended for butt‑fusion or electro‑fusion joining, in line with ISO 4437‑3 requirements for polyethylene fittings.

Which HS codes should be used for customs documentation?

PPR and HDPE pipe entries use HS 3917.23, while the PE100 fitting entries use HS 3917.40.

What certifications should a buyer request before purchasing?

Buyers typically request ISO 9001 quality‑management certificates, material test reports, and any CE or RoHS compliance documents relevant to the pipe or fitting grade.

What are typical packaging and shipping arrangements for these products?

Products are usually bundled on wooden pallets, wrapped in moisture‑barrier film, and loaded into 20‑ft or 40‑ft containers under FOB Fujian or CIF terms.

What is the usual minimum order quantity for the listed pipe products?

While the supplier does not publish a fixed MOQ, exporters of HDPE and PPR pipe often set a minimum order of several hundred meters per product line, subject to negotiation.

How long is the typical lead time from order confirmation to shipment?

Lead times for polymer pipe and fittings from Chinese manufacturers generally range from four to six weeks, depending on order size and required certifications.