About Entrac Premium Pvt. Ltd. - Floor Tiles Supplier in India

India, with a catalogue of 10 active products, supplies a mix of ceramic and floor tiles alongside industrial chemicals. Entrac Premium Pvt. Ltd. lists ceramics under the generic label Ceramic Tiles and four distinct floor tile lines - Intel, Aura, Crystle and Meta - as well as a wall tile line named Star. The chemical portfolio includes bromine, citric acid, bentonite (HS 2508.10, montmorillonite clay) and ammonium sulfate (HS 3102.30, (NH4)2SO4). The supplier’s top‑level categories are recorded as Floor Tiles, Tiles, Industrial Chemicals, Ceramic Tiles, Wall Tiles, Bentonite and Ammonium Sulphate. All products are sourced from India and are presented for export.

The floor and wall tile entries fall under the broader HS chapter 69 for ceramic products, while the chemicals are classified under chapters 28 (bromine) and 31 (citric acid, ammonium sulfate). No additional certifications are listed for the supplier, so buyers typically verify compliance with ISO 9001 quality management and relevant material safety standards. The catalogue does not specify dimensions or finishes for the tiles, nor purity levels for the chemicals, which are common data points in international trade. Entrac Premium’s trust tier is recorded as “harbor”, indicating a mid‑level verification status on the platform.

Product Range and Specialties of Entrac Premium Pvt. Ltd.

The tile portfolio comprises generic Ceramic Tiles and four branded floor‑tile series - Intel, Aura, Crystle and Meta - plus a Star wall‑tile line. In the ceramic tile market, buyers usually require ISO 13006 compliance, water absorption below 0.5 %, a PEI rating that matches the expected traffic load, and standard dimensions such as 600 × 600 mm or 300 × 300 mm with thickness of 8‑10 mm. Chemical products follow industry norms: bromine is typically supplied at 99.5 % purity for water‑treatment, citric acid at food‑grade 99.5 % purity, bentonite (HS 2508.10) as Na/Ca‑montmorillonite with moisture 12‑14 % and a montmorillonite content of 70‑80 %, and ammonium sulfate (HS 3102.30) as a fertilizer grade with a nitrogen content around 21 % and low impurity levels. Buyers often request certificates of analysis, material safety data sheets, and compliance with BIS or ISO standards for each of these chemicals.

Trade and Export Information - Entrac Premium Pvt. Ltd.

India is a major exporter of ceramic tiles to the Middle East, Africa, the European Union and the United States, with shipments normally classified under HS 69‑07 (glazed ceramic tiles). Industrial chemicals such as bromine, citric acid and ammonium sulfate are shipped to agricultural, water‑treatment and manufacturing customers worldwide, frequently using HS codes 2805, 3106 and 3102 respectively. Typical export documentation includes a commercial invoice, packing list, certificate of origin, and, where required, an ISO 9001 quality certificate or BIS certification for chemicals. Containers for tiles are usually loaded in 20‑ft or 40‑ft units on wooden pallets with internal cardboard separators, while bulk chemicals are packed in drums or fiber‑board bags and secured for transport under CIF or FOB terms.

Sourcing from Entrac Premium Pvt. Ltd. - Buyer Guidance

When sourcing tiles from this supplier, request a technical data sheet that details size, thickness, glaze type, PEPE rating and any applicable ISO 13006 test results. For the chemical line, obtain a current Material Safety Data Sheet, a Certificate of Analysis showing purity and moisture levels, and verify that the product meets any regional fertilizer or food‑grade standards before shipment. Confirm the HS codes listed in the catalogue, ask for sample units where feasible, and ensure that packaging meets the buyer’s logistics requirements, such as crate dimensions for tiles or drum specifications for liquids.

What tile sizes are available from Entrac Premium?

The catalogue does not list specific dimensions, so buyers should request a technical data sheet that includes standard sizes such as 600 × 600 mm or 300 × 300 mm, thickness, and surface finish.

Which quality standards apply to the ceramic tiles?

Ceramic tiles are generally required to meet ISO 13006 specifications, have a water absorption rate below 0.5 % and carry a PEI rating appropriate for the intended traffic level.

How is the bentonite classified and what specifications are typical?

The bentonite is listed under HS 2508.10 as montmorillonite clay (Na/Ca‑Montmorillonite). Typical specifications include a moisture content of 12‑14 % and a montmorillonite purity of 70‑80 % for drilling or sealing applications.

What documentation should be requested for ammonium sulfate?

Buyers should ask for a Certificate of Analysis, a Material Safety Data Sheet, and proof of compliance with Indian Fertilizer Standards (IS 1646) that define nitrogen content and soluble salts.

Is bromine supplied for industrial use and what purity is expected?

Bromine is commonly supplied for water‑treatment and chemical synthesis with a purity of 99.5 % or higher; buyers should request a purity certificate and handling guidelines.

Which HS codes cover the listed products?

Bentonite uses HS 2508.10, ammonium sulfate HS 3102.30, while ceramic and floor tiles fall under HS chapter 69 (e.g., 6907 for glazed ceramic tiles), and bromine and citric acid are classified under chapters 28 and 31 respectively.

What are typical incoterms and packaging for these exports?

Export shipments from India are frequently quoted on CIF or FOB terms; tiles are packed in wooden crates with internal cardboard separators, and chemicals are placed in 20‑ft or 40‑ft containers with bulk drums or fiber‑board bags as appropriate.