About Dongying Gardener Oilfield Equipment Co., Ltd - Industrial Equipment Supplier in China

Dongying Gardener Oilfield Equipment Co., Ltd is located in Dongying, China and currently lists ten active products. The catalogue spans categories such as automobile gears, wires & cables, electric motors, machined components, CNC machines, industrial pumps, stainless steel pipe systems, and magnetic products. Each entry specifies material grades like stainless steel 304/316L, alloy steel 41xx, and samarium‑cobalt for magnets, and several items are paired with HS codes that locate them in the global customs taxonomy. The supplier’s portfolio therefore covers both mechanical sub‑assemblies and high‑performance magnetic components used in oilfield and industrial applications.

The product list includes a submersible motor housing and pump housing, an oil‑electric submersible protector shaft (HS 8483.60, stainless steel 410 or AISI 4140), an API Q1‑rated cable protector for ESP cables, motor stator laminations and rotors, TEC power cables, ESP motor and pump shafts (HS 8483.40, stainless steel 316L or alloy steel 41xx), high‑precision CNC machining parts (HS 8466.93, stainless steel 304/316, carbon or alloy steel), a Monel 500 submersible pump shaft, stainless steel capillary pipe (HS 7304.11, SS 304/316), and sintered/bonded SmCo magnets (HS 8505.19, grades YXG‑26/28/30).

Product Range and Specialties of Dongying Gardener Oilfield Equipment Co., Ltd

The catalogue’s mechanical items are typical of oil‑field equipment where corrosion resistance and high‑strength alloys are essential. Stainless steel 304 and 316L comply with ASTM A240 for pipe and housing applications, while alloy steels such as AISI 4140 or the 41xx series meet ISO 683‑2 strength specifications. CNC‑machined components are often produced to tolerances of ±0.01 mm and surface finishes of Ra 0.8 µm, matching industry standards for precision parts. SmCo magnets are commonly supplied in grades YXG‑26 to YXG‑30, delivering energy products of 30 - 35 MGOe and operating temperatures up to 250 °C, which aligns with IEC 60404‑5 requirements for high‑temperature magnetic assemblies.

Trade and Export Information - Dongying Gardener Oilfield Equipment Co., Ltd

China is a major exporter of oil‑field mechanical components, and shipments from Dongying typically move to the Middle East, Southeast Asia, and European markets where offshore drilling and heavy‑industry sectors are expanding. The HS‑code families in the catalogue (8483, 8466, 7304, 8505) fall under customs duties that often range from 0 % to 8 % depending on the destination’s tariff schedule. Buyers usually request ISO 9001 quality‑management certification, API Q1 compliance for oil‑field gear, IEC 60332 fire‑rating for power cables, and ASTM material certificates for stainless steel and alloy parts. Standard export packaging includes wooden crates, steel drums for shafts, and bulk pallets for pipes, with container loads fitting 20‑ft or 40‑ft containers and typical Incoterms of FOB Dongying or CIF destination port.

Sourcing from Dongying Gardener Oilfield Equipment Co., Ltd - Buyer Guidance

When sourcing from Dongying Gardener, request material test reports that reference ASTM A240 for stainless steel, ASTM A29 for alloy steel, and ASTM B211 for Monel 500. For the SmCo magnets, ask for magnetic property certificates that list remanence (Br), coercivity (Hc), and maximum energy product (BHmax) in line with IEC 60404‑5. Cable protectors and power cables should be accompanied by IEC 60228 conductor class certificates and API Q1 inspection reports, while CNC‑machined parts benefit from dimensional inspection reports (CMM data) and surface‑finish verification. Verifying these documents before order confirmation helps ensure compliance with downstream specifications and reduces the risk of non‑conformity at customs.

What product categories are included in Dongying Gardener’s catalogue?

The supplier lists ten items covering submersible motor and pump housings, protector shafts, API Q1 cable protectors, motor stator and rotor laminations, TEC power cables, ESP motor and pump shafts, high‑precision CNC machined parts, Monel 500 pump shafts, stainless steel capillary pipe, and SmCo magnets.

Which HS codes correspond to the listed products?

The catalogue assigns HS 8483.60 to the oil‑electric protector shaft, HS 8483.40 to ESP motor and pump shafts, HS 8466.93 to CNC machining parts, HS 7304.11 to stainless steel capillary pipe, and HS 8505.19 to the sintered SmCo magnets. Other items are classified within the same chapter groups but without specific codes provided.

What material standards apply to the stainless steel components?

Stainless steel parts such as the pump housing and capillary pipe are manufactured from SS 304 and SS 316L, which conform to ASTM A240 chemical and mechanical requirements. These grades also meet ISO 15510 for corrosion‑resistant steel used in oil‑field environments.

Which certifications are typically required for the cable protectors and power cables?

Buyers usually request API Q1 certification for oil‑field cable protectors and IEC 60228 or IEC 60332 fire‑rating certificates for power cables. Documentation should also include UL or CE marking where the destination market mandates it.

How are the products typically packaged for export?

Mechanical shafts and housings are shipped in wooden crates with foam padding, while pipes are coiled or bundled on steel pallets. Magnets are packed in anti‑static bags inside reinforced boxes, and all items are loaded into 20‑ft or 40‑ft containers according to volume and weight constraints.

What are the usual minimum order quantities and lead times?

Lead times vary by product; CNC‑machined parts and custom shafts generally require 4‑6 weeks, while standard pipe and magnet orders may be ready in 2‑3 weeks. Minimum order quantities range from a single custom shaft to bulk packs of 1 000 meters of cable, depending on the item.

How can a buyer request samples or test reports?

Buyers should submit a formal inquiry specifying the product code, material grade, and required test parameters. The supplier can then provide material test reports, dimensional inspection sheets, and magnetic property certificates prior to full‑scale production.