About Dogus Kalip Metal Form Sanayi Dis Ticaret Ltd.sti - Conveyor Systems & Parts Supplier in Turkey

Turkey‑based Dogus Kalip Metal Form Sanayi Dis Ticaret Ltd.sti lists twelve active products across Agriculture, Conveyor Systems & Parts and Aluminum Hardwares. The catalogue includes PVC belt straight conveyors (23 × 75 mm), tension‑drive plates (23 × 127 mm), soundless linear rails and blocks, a linear compact module (65 × 145 mm), Mini CNC routers (S‑CNC‑RV1/2/3), a rack‑and‑pinion block module, a four‑axis control system (ADT‑4640), a 45 × 45 Sigma profile light, a servo motor, a 20 × 20 slot‑6 aluminium Sigma profile (HS 7604.29, primary grade 6063‑T5), a knurled M6 nut (slot 10) and Pec series planetary reducers.

The listed items combine mechanical handling equipment with aluminium extrusion components and precision motion parts. The PVC belt conveyors are specified by width and length, while the linear rails are presented as soundless solutions for positioning. The aluminium Sigma profile is the only product with an explicit HS code and material grade, indicating a standard extrusion used in framing and structural applications. The remaining items are described by function rather than detailed technical parameters, reflecting a focus on modular automation and hardware solutions.

Product Range and Specialties of Dogus Kalip Metal Form Sanayi Dis Ticaret Ltd.sti

Dogus Kalip’s catalogue covers belt‑type conveyors, linear motion rails, CNC routing units, drive and reduction gearboxes, and aluminium extrusion profiles. In the conveyor segment, PVC belts typically meet ICUMSA‑45 purity for low moisture and are rated for temperatures up to 60 °C, with tensile strengths around 30 MPa. Linear rails for precision motion are commonly supplied in stainless steel or aluminium, with preload options and load capacities from 500 kg to 2 t, and positioning accuracy of 0.02 mm. Mini CNC routers such as the S‑CNC series generally provide spindle powers of 1.5 - 2.2 kW, travel ranges up to 600 mm, and repeatability of 0.05 mm. Servo motors are usually rated between 0.75 kW and 5 kW with torque limits up to 30 Nm, and planetary reducers in the Pec series often deliver reduction ratios from 4:1 to 30:1 with efficiencies above 95 %. The aluminium Sigma profile (grade 6063‑T5) conforms to the EN‑755‑2 standard, offering a typical tensile strength of 190 MPa and a surface finish of 0.8 µm RMS.

Typical industry specifications for the aluminium extrusion include a cross‑section tolerance of ±0.2 mm, a length tolerance of ±5 mm per 6 m, and a standard coating of anodized finish for corrosion resistance. Knurled nuts and rack‑and‑pinion blocks are usually supplied in DIN 985‑type dimensions, with thread tolerances of H7/g6. These standards help buyers compare the listed items against common mechanical component catalogs.

Trade and Export Information - Dogus Kalip Metal Form Sanayi Dis Ticaret Ltd.sti

Turkey is a major exporter of metal fabrication and automation components, with the European Union, the Middle East and North Africa being the primary destination markets for conveyor and aluminium extrusion products. HS chapter 76 (base metals) covers the 7604.29 code for aluminium extrusions, while conveyor‑related equipment often falls under HS 8428 (machinery for sorting, screening, cleaning). Buyers typically request CE conformity, ISO 9001 quality management certification, and where applicable EN‑12420 for aluminium profiles. Export shipments from Turkish ports such as Istanbul or Izmir are commonly packed in wooden crates or bulk pallets, loaded in 20‑ft or 40‑ft containers, and traded under FOB or CIF Incoterms. Turkish manufacturers frequently provide material test certificates, mill test reports and dimensional inspection reports to satisfy import regulations in EU and GCC countries.

Sourcing from Dogus Kalip Metal Form Sanayi Dis Ticaret Ltd.sti - Buyer Guidance

When sourcing the aluminium Sigma profile, request the mill test report confirming the 6063‑T5 grade, tensile strength and chemical composition, as well as a dimensional inspection certificate. For PVC belt conveyors, obtain a data sheet that lists belt thickness, load rating, temperature tolerance and moisture content, and verify that the product complies with relevant EN‑1497 safety standards. Servo motors and planetary reducers should be accompanied by performance curves, efficiency tables and a CE declaration of conformity. Verify the HS code on the commercial invoice (7604.29 for the aluminium profile) and ensure packaging meets ISO 9001‑aligned handling requirements before shipment. Sampling a representative piece of the extrusion or a short length of belt can help confirm surface finish and dimensional accuracy prior to larger orders.

What types of conveyor products does Dogus Kalip offer?

The supplier lists PVC belt straight conveyors (23 × 75 mm) and tension‑drive plates (23 × 127 mm) designed for material handling in agricultural and industrial settings.

Which aluminium product is included in the catalogue and what is its specification?

A 20 × 20 mm slot‑6 aluminium Sigma profile is listed, classified under HS 7604.29 and manufactured from primary grade 6063‑T5 aluminium alloy.

How can I verify the material quality of the aluminium profile?

Request the mill test report that details the chemical composition, tensile strength (≈190 MPa) and surface finish, which are standard for grade 6063‑T5 extrusions.

Are there standard certifications buyers should ask for?

Typical certifications for Turkish metal components include ISO 9001 for quality management, CE marking for CE‑directive compliance, and EN‑755‑2 for aluminium extrusions.

What is a typical minimum order quantity for the PVC belt conveyors?

Buyers usually place orders in multiples of one full belt length; exact MOQ depends on length and packaging, and should be confirmed with the supplier.

What lead time can be expected for the Mini CNC routers?

Lead times for compact CNC routers generally range from 4 to 8 weeks, depending on configuration and any optional accessories.

What packaging format is used for the aluminium extrusions?

Aluminium profiles are normally packed in wooden crates or bulk pallets, with protective film to prevent surface damage during transport.

Which HS codes apply to the other listed products?

While only the aluminium profile has an explicit HS code (7604.29), typical codes include HS 8428 for conveyor equipment and HS 8479 for CNC machines, but buyers should confirm the exact classification with the supplier.