About Dg Mf Mold Clamps Co., Ltd - Clamps Supplier in China

Based in China, Dg Mf Mold Clamps Co., Ltd lists 67 active products that concentrate on clamps, injection‑moulded components and related mould‑clamping machinery. The product set includes closed‑slot mold clamps, machined clamp bodies, torque calculation tools and specialised mould‑handle clamps, each recorded with HS codes that fall in the 8205, 8207, 8466, 8480, 8481 and 8483 families. Materials are identified as tool steels such as H13, P20, alloy steel 4140 and high‑strength hardened steels, reflecting standard engineering grades for mould hardware. The catalogue also references calculation instruments classified under HS 9031.89, indicating electronic or chart‑based tools used for tonnage estimation.

The listing shows a mix of finished clamp assemblies (e.g., Clamp Lock Mold, Arching Mold Clamps) and component‑level items (e.g., Mold Clamp M16, Mold Clamp Torque). Several entries specify hardened alloy steel with zinc or black‑oxide plating, while others note high‑carbon or heat‑treated steels, illustrating the typical material spectrum required for injection‑moulding applications. HS codes such as 8205.70 (other cast articles of iron or steel) and 8480.41 (tools for working metal) confirm the industrial classification of these items.

Product Range and Specialties of Dg Mf Mold Clamps Co., Ltd

The catalogue offers closed‑slot mold clamps, machined clamp bodies, and specialised clamps for jewellery, arching, and high‑precision moulds. Typical industry grades for these products include tool steel H13 (often hardened to 45‑55 HRC), P20 for medium‑hardness mould inserts, and alloy steels such as 4140 or 40Cr, which are heat‑treated to achieve tensile strengths of 800‑1000 MPa. Buyers usually encounter dimensions expressed in millimetres with tolerance bands of ±0.1 mm for clamp bore sizes, and torque capacities ranging from 500 Nm to 15 000 Nm depending on tonnage. Standard specifications also cover surface treatments - zinc plating or black‑oxide - to improve corrosion resistance in humid factory environments.

Trade and Export Information - Dg Mf Mold Clamps Co., Ltd

Trade and Export Information - Dg Mf Mold Clamps Co., Ltd

Trade and Export Information - Dg Mf Mold Clamps Co., Ltd

Chinese manufacturers of mould clamps commonly ship to Europe, North America and Southeast Asia, where automotive, consumer‑goods and medical‑device mould shops import these components. HS chapters 82 (tools and implements), 84 (machinery) and 85 (electrical equipment) are the primary tariff classifications, and many importers require certificates such as ISO 9001 quality management, CE marking for equipment, and RoHS compliance for electronic calculation tools. Shipments are typically packed in wooden crates or steel‑framed pallets, loading 20‑foot containers with 1 200 - 1 500 kg of steel clamps or 40‑foot containers for larger bulk orders. Common Incoterms include FOB Shanghai or CIF Hong Kong, with buyers arranging customs clearance under the relevant HS codes (e.g., 8205.70 for forged clamp parts).

Sourcing from Dg Mf Mold Clamps Co., Ltd - Buyer Guidance

When sourcing from Dg Mf Mold Clamps Co., Ltd, buyers should request material certificates confirming steel grade, chemical composition and hardness (HRC) for each clamp type. Test reports for tensile strength, dimensional accuracy and torque capacity are standard documents that validate compliance with industry specifications. It is advisable to obtain a sample or a 3‑D CAD drawing before confirming bulk orders, and to verify that the supplier can provide ISO 9001 or equivalent quality‑system documentation if required by the importing market.

What product categories does Dg Mf Mold Clamps Co., Ltd list?

The supplier lists clamps for injection moulding, machined mould clamp bodies, torque and tonnage calculation instruments, and related mould‑clamping machinery, each identified with HS codes in the 8205‑8483 range.

Which HS codes are associated with the listed clamp products?

Typical HS codes include 8205.70 (forged or cast clamp parts), 8207.30 and 8207.40 (clamp mechanisms), 8466.93 (high‑strength steel tools), 8480.41 and 8480.60 (metalworking tools), and 8481.20 (arch‑type clamps).

What materials are commonly used in these clamps?

Materials are specified as tool steel H13, P20, alloy steels such as 4140, high‑carbon steel, and hardened alloy steel, often supplied with zinc or black‑oxide plating for corrosion resistance.

What certifications should a buyer request for these mould clamps?

Buyers should ask for material test certificates, hardness reports, and a copy of the supplier’s ISO 9001 quality‑management certification; CE or RoHS compliance may be required for electronic calculation devices.

What are typical packaging and shipping methods for these items?

Clamps are usually packed in wooden crates or steel‑framed pallets, with container loads of 20 ft (≈1 200 kg) or 40 ft (≈2 400 kg). FOB Shanghai and CIF Hong Kong are common Incoterms used by Chinese exporters.

What documentation is needed before placing a bulk order?

Request a detailed product specification sheet, material certification, hardness and tensile test reports, and, if applicable, CE or RoHS declarations for electronic instruments. A pre‑shipment sample can verify dimensions and finish.

What are the typical lead times for these clamp products?

Lead times for standard clamp models are generally 15‑30 days after order confirmation, while custom‑machined or heat‑treated variants may require 30‑45 days depending on tooling and processing requirements.

Which markets most frequently import Chinese mould clamps?

Major importers include the European Union, the United States, Canada, Japan and South‑East Asian countries such as Vietnam and Malaysia, where automotive, consumer‑goods and medical‑device manufacturers source mould‑clamping hardware.