About Ci Network Technologies Pvt. Ltd. - Safety & Security Equipment Supplier in India

India hosts Ci Network Technologies Pvt. Ltd., which currently lists 14 distinct products in its catalogue. The supplier’s top categories include Cupboards, Doors, Gates, Grills & Windows, Blankets, Traffic Safety Devices, Safety & Security Equipment, Light Emitting Diode, Fencing Materials, CCTV & Accessories and Surveillance Equipments. Each listed item belongs to one of the product families identified in the catalogue, and the HS‑code families that appear are 8479.89 for automatic door and gate systems, 9020.00 for a bomb‑blanket type, and 6307.90 for textile‑based ballistic blankets. The company’s catalogue does not provide additional quantitative details such as production capacity or employee numbers, and all statements are limited to the supplied facts.

The catalogue contains a 9 W LED bulb (CINT 9Watt LED Bulb), three automatic door or gate operators (Swing Door System, Sliding Door, Swing Gate Operator) all classified under HS 8479.89 and built from aluminum, stainless steel and galvanized steel components, a range of fencing and barrier products (Iron Solar Fencing, Bollard, Boom, Tripod and Flap Barriers), two CCTV camera types (Dome Camera and Bullet Camera), and three bomb‑blanket textiles of sizes 1.5 × 1.5 m, 1.5 × 2 m and 1 × 1.5 m with HS codes 9020.00 and 6307.90. Materials mentioned include aluminum alloy frames, steel drive components, aramid/Kevlar‑type composites and galvanized steel, providing a clear view of the technical scope of the supplier’s offerings.

Product Range and Specialties of Ci Network Technologies Pvt. Ltd.

The 9 W LED bulb is positioned within the general lighting segment where typical specifications include a luminous flux of 800 - 900 lumens, a colour‑rendering index (CRI) of 80 or higher, and an efficacy of around 90 lm/W. For the automatic swing, sliding and gate operators, industry practice calls for compliance with EN 16005 (safety of door‑opening machines) and an IP‑rating of at least IP65 for outdoor installations; the aluminium housing and stainless‑steel gears cited align with those standards. Iron solar fencing and the various barrier devices are normally fabricated from hot‑dip galvanised steel meeting ASTM A123 or ISO 1461 coating requirements, with typical pole diameters of 40 - 60 mm and load capacities from 1 kN to 5 kN depending on design. CCTV dome and bullet cameras generally ship with resolutions of 1080p or higher, infrared night‑vision ranges of 20 - 30 m, and IP66/IP67 protection, matching the expectations of security integrators. The bomb blankets are textile‑based ballistic composites; standard grades for such products are NIJ Level III or IV, with areal densities between 30 g/m² and 60 g/m² and a minimum burst strength of 2 kN, which fits the material descriptions of aramid and UHMWPE blends.

Trade and Export Information - Ci Network Technologies Pvt. Ltd.

India is a significant exporter of security hardware, construction fittings and specialised protective textiles, and buyers from the Middle East, Africa, Southeast Asia and Eastern Europe regularly import these categories. HS 8479.89 covers a broad range of automatic door and gate mechanisms, while HS 9020.00 is used for safety‑related equipment such as bomb‑blankets, and HS 6307.90 applies to other textile articles not elsewhere specified. Typical import requirements include CE marking for mechanical safety, ISO 9001 quality‑management certification for the manufacturing process, and IEC 60529 IP ratings for weather resistance. For ballistic blankets, buyers often request test reports to NIJ or EN‑1522 standards and may also seek ISO 14001 environmental compliance from the exporter. Export shipments from India are commonly packed on standard 20‑ft or 40‑ft containers, with door systems and barriers palletised on wooden crates and textile blankets rolled and banded; common Incoterms used are FOB Indian ports such as Mumbai or CIF to the buyer’s destination.

Sourcing from Ci Network Technologies Pvt. Ltd. - Buyer Guidance

When evaluating Ci Network Technologies Pvt. Ltd., buyers should request product data sheets that list luminous flux, CRI and power factor for the LED bulb, and EN 16005 compliance certificates, IP‑rating test reports and motor torque curves for the automatic door and gate units. For fencing and barrier products, a galvanised‑steel coating certification (ASTM A123 or ISO 1461) and load‑test certificates will confirm structural capability. CCTV cameras should be accompanied by a type‑approval report showing resolution, frame rate and IP‑rating verification. Bomb‑blanket textiles require ballistic test certificates (NIJ Level III/IV or equivalent) and material composition analysis confirming aramid or UHMWPE content. Verifying these documents before order placement helps mitigate risk, and standard minimum order quantities in this segment range from 10 units for door operators to 100 pieces for barrier components, with typical lead times of 4 - 6 weeks after receipt of a confirmed purchase order.

What HS codes apply to the automatic door and gate products?

The automatic swing door system, automatic sliding door and swing gate operator are all classified under HS code 8479.89, which covers machines and mechanical appliances for opening, closing or lifting doors, gates, windows or similar openings.

Which certifications are usually required for the door operator systems?

Buyers typically request CE marking for mechanical safety, EN 16005 compliance for door‑opening machines, and an IP‑rating (commonly IP65) to confirm protection against dust and water.

What performance data should be obtained for the 9 W LED bulb?

Request a datasheet showing luminous flux (approximately 800 - 900 lm), colour‑rendering index (CRI ≥ 80), power factor (≥ 0.9) and the bulb’s operating voltage range.

Are there standard material specifications for the fencing and barrier items?

Fencing and barrier components are usually made from hot‑dip galvanised steel meeting ASTM A123 or ISO 1461 coating standards, with typical pole diameters of 40 - 60 mm and load capacities from 1 kN to 5 kN.

What test reports are expected for the bomb blankets?

Ballistic blankets are commonly required to provide NIJ Level III or IV test certificates, indicating areal density (30 - 60 g/m²) and burst strength (minimum 2 kN), together with a material composition analysis confirming aramid or UHMWPE content.

Which camera specifications are typical for the dome and bullet cameras?

Standard specifications include a minimum resolution of 1080p, infrared night‑vision range of 20 - 30 m, and an IP rating of IP66 or IP67 for outdoor durability.

What are the usual packaging and shipping methods for these products?

Door and barrier systems are generally palletised on wooden crates, bomb blankets are rolled and banded, and all items are shipped in 20‑ft or 40‑ft containers, often under FOB terms from Indian ports such as Mumbai.

What lead time and MOQ should a buyer anticipate?

Typical lead times are 4 - 6 weeks after order confirmation, with minimum order quantities around 10 units for automatic door operators and 100 pieces for barrier components; textile blankets may have higher MOQ depending on size and material batch.