About Bioshell - Diverse Commodity Supplier in Malaysia

Bioshell is based in Malaysia and currently lists 22 distinct products across several commodity groups. The catalogue covers metal commodities such as copper cathode (HS 7403.11) and primary aluminium ingots (HS 7601.20). It also includes major agricultural and oil products, including diesel fuel, various grades of palm oil, urea fertiliser, and a range of vegetable oils such as rapeseed, sunflower, canola, soybean and olive oil. Additional items comprise bulk commodities like spodumene concentrate (HS 2530.90) and livestock products such as beef and lamb. The product list reflects both refined and crude forms, for example refined rapeseed oil and crude sunflower oil.

Product Range and Specialties of Bioshell

The Bioshell catalogue includes metal products under HS chapter 74 and 76, such as copper cathode (HS 7403.11) and copper wire (HS 7404.00) made from electrolytic copper, as well as primary aluminium ingots (HS 7601.20) of at least 99.7 % aluminium. Agricultural and energy commodities are listed under HS chapters 15, 27 and 38, featuring diesel gasoil (GOST 305‑82), several palm oil grades (CP08, CP10), urea 46 % N in prilled and granular forms, and a suite of vegetable oils including refined rapeseed, crude sunflower, non‑GMO crude canola, refined soybean and extra‑virgin olive oil. Spodumene concentrate (HS 2530.90) is presented with a lithium‑oxide content of 5.5‑6.5 %, while livestock entries cover beef (Angus) and lamb.

Typical industry specifications complement these listings. Copper cathode is usually required at 99.99 % Cu purity, while millberry copper wire is graded at a minimum of 99.9 % Cu and specified by tensile strength in the range of 200‑250 MPa. Primary aluminium ingots commonly meet a minimum of 99.7 % Al and are supplied in standard 500 kg ingot sizes. Palm oil grades CP08 and CP10 correspond to cloud points of approximately 8 °C and 10 °C respectively, and buyers often request free fatty acid levels below 0.1 % for refined oils. Vegetable oils are typically graded by ICUMSA colour (e.g., ICUMSA 45 for refined rapeseed) and iodine value, with moisture limits under 0.1 % for refined products. Urea fertiliser grades are defined by nitrogen content (46 % N) and particle size distribution for prilled versus granular forms. Spodumene concentrate is evaluated for Li₂O content and particle size (often 0‑5 mm).

Trade and Export Information - Bioshell

Malaysia is one of the world’s largest exporters of palm oil, copper cathode, primary aluminium and nitrogen fertilisers, supplying buyers in East Asia, the European Union, the Middle East and North America. HS chapter 74 commodities (copper and copper wire) are frequently inspected under SGS or Bureau Veritas protocols, with certificates of origin and metal analysis reports required for customs clearance. Aluminium ingots (HS 7601.20) are shipped in 40‑ft containers on wooden pallets, and buyers typically request ISO 9001 quality management certificates and melt‑analysis certificates. Palm oil grades (CP08, CP10) are subject to RSPO compliance, ISO 22000 food safety standards and may need a phytosanitary certificate for certain destination countries. Diesel gasoil listed under GOST 305‑82 is classified under HS 2710 and often requires a Certificate of Analysis confirming sulphur content below 10 ppm for EU markets. Spodumene concentrate (HS 2530.90) is exported in bulk bags or bulk carriers, with buyers usually asking for a detailed assay report and a customs‑approved origin certificate. Livestock products such as beef and lamb are governed by the CITES and HACCP frameworks and are typically packed in chilled containers with temperature monitoring.

Export logistics from Malaysia usually employ FOB or CIF Incoterms, with containerisation for oils, metals and fertilisers and bulk carrier shipments for spodumene. Common packaging includes 20 kg polypropylene bags for oils, 500 kg steel drums for diesel, and 25 kg paper bags for urea. Importing countries often require pre‑shipment inspection (PSI) reports, especially for metals and fertilisers, to meet anti‑dumping and safety regulations.

Sourcing from Bioshell - Buyer Guidance

When sourcing from Bioshell, buyers should request the latest Certificate of Analysis for each commodity, confirming purity (e.g., 99.99 % Cu for cathode), moisture or free‑fatty‑acid levels for oils, and nitrogen content for urea. For metal products, obtain a mill test report that includes tensile strength, elongation and chemical composition, and verify that the HS code matches the invoice to avoid customs discrepancies. Vegetable‑oil buyers typically ask for an ICUMSA colour test, cloud‑point measurement and a phytosanitary certificate where required. Fertiliser purchasers should ensure the nitrogen analysis report shows exactly 46 % N and request a bulk sample for particle‑size verification. For spodumene concentrate, request a full assay covering Li₂O percentage and impurity levels, and confirm container seal integrity before loading. Verify that any required third‑party certifications (e.g., RSPO for palm oil, ISO 9001 for metals) are provided before confirming the order.

What HS codes does Bioshell use for its metal products?

Copper cathode is listed under HS 7403.11, copper wire under HS 7404.00 and primary aluminium ingots under HS 7601.20. These codes align with the standard international classification for electrolytic copper and primary aluminium.

Which purity levels are specified for the copper products?

The catalogue states electrolytic copper cathode at 99.99 % Cu purity and millberry copper wire at a minimum of 99.9 % Cu. Buyers normally request a melt‑analysis report to confirm these figures.

What are the typical quality parameters for the palm oil grades CP08 and CP10?

CP08 and CP10 refer to cloud‑point grades of approximately 8 °C and 10 °C. Standard quality checks include free‑fatty‑acid content below 0.1 % and moisture under 0.05 %.

How is urea 46 % N presented and what documentation is needed?

Urea is offered in prilled and granular forms with a guaranteed nitrogen content of 46 % N. Importers should request a nitrogen analysis certificate and, where required, a fertilizer registration document for the destination market.

What specifications apply to the refined vegetable oils?

Refined oils such as rapeseed, soybean and olive oil are typically graded by ICUMSA colour (e.g., ICUMSA 45 for rapeseed) and have limits on free fatty acids (<0.1 %) and moisture (<0.1 %). A Certificate of Analysis confirming these parameters is standard practice.

What packaging and container sizes are used for bulk shipments?

Metals are usually shipped in 40‑ft containers on wooden pallets, oils in 20‑kg polypropylene bags, diesel in 20‑kg drums, and urea in 25‑kg paper bags. Spodumene concentrate is packed in bulk bags (typically 1‑ton capacity) for bulk‑carrier transport.