About Aobote Rubber Co., Ltd. - Conveyor Systems & Parts Supplier in China

Aobote Rubber Co., Ltd. is based in China and currently lists five active products in its catalogue. The company focuses on conveyor systems and parts, specifically a variety of conveyor belts. Its product list includes a Steel Cord Conveyor Belt, Chevron Conveyor Belt, Fabric Conveyor Belt, Corrugated Sidewall Conveyor Belt, and a Bucket Elevator Conveyor Belt. Each item is described using the generic category terminology found in international trade listings. The catalogue is organized under the broader machinery‑parts segment that is common for export documentation.

Product Range and Specialties of Aobote Rubber Co., Ltd.

The supplier’s catalogue covers several belt constructions. Steel‑cord belts combine high‑strength steel wires with rubber or fabric carriers, offering tensile strengths often above 150 MPa and widths from 300 mm to 2000 mm. Chevron‑type belts feature a V‑shaped pattern that improves traction and are typically specified by pitch length, belt thickness (3 - 10 mm) and rubber durometer. Fabric belts use polyester or cotton fabrics as the carrier and are graded by tensile load and elongation percentages. Corrugated sidewall belts provide side protection and are measured by sidewall height and core thickness. Bucket‑elevator belts are designed for vertical lift applications and are classified by bucket spacing and belt speed. Buyers generally compare these specifications against ISO 9001‑based quality systems and industry standards such as EN 1317 for safety and performance.

Trade and Export Information - Aobote Rubber Co., Ltd.

China is a major exporter of conveyor belt systems, supplying equipment to manufacturing hubs in Southeast Asia, Europe and North America. Export shipments usually employ 20‑ft or 40‑ft containers, with belts coiled on wooden pallets or rolled on steel drums, and are protected with moisture‑resistant wrapping. Importers often require test reports that confirm compliance with standards such as IEC 60204 for electrical safety of associated drive units, and CE marking for market access in the EU. Typical certifications requested by buyers include ISO 9001 quality management, ISO 14001 environmental management, and material‑specific test certificates for tensile strength, elongation and abrasion resistance. Freight terms frequently used are CIF or FOB, with buyers arranging inland transport after container discharge.

Sourcing from Aobote Rubber Co., Ltd. - Buyer Guidance

When sourcing conveyor belts from this supplier, request a product data sheet that lists belt width, thickness, core material, tensile strength and recommended operating temperature. Ask for a recent laboratory test report that includes tensile load, elongation at break and abrasion wear index, as these parameters verify durability. Verify whether the supplier can provide ISO 9001 or CE documentation, and confirm that the belts meet any regional safety standards required by the end‑use industry. It is advisable to obtain a short sample or a small‑quantity trial run to assess belt alignment, tracking and compatibility with existing drive systems before placing a full order. Confirm packaging details, such as coil diameter and pallet dimensions, to ensure efficient loading and handling at the destination port.

What types of conveyor belts does Aobote Rubber Co., Ltd. offer?

The catalogue lists Steel Cord, Chevron, Fabric, Corrugated Sidewall and Bucket Elevator conveyor belts, each designed for specific handling and transport applications.

Are technical specifications available for each belt type?

Yes, the supplier provides data on belt width, thickness, tensile strength, core material and recommended operating temperature in the product data sheets.

Which certifications should a buyer request for these belts?

Buyers typically request ISO 9001 quality management certificates, CE conformity declarations and material test reports covering tensile load and abrasion resistance.

What is the usual minimum order quantity for a steel‑cord belt?

Minimum order quantities vary by width and length, but a common baseline is a single coil of 500 mm width, which can be confirmed with the supplier for each specification.

What lead time can be expected for a standard fabric conveyor belt?

Lead times generally range from 30 to 45 days after order confirmation, depending on belt dimensions and any custom printing requirements.

How are the belts packaged for export?

Belts are typically coiled on wooden pallets or wound on steel drums, then wrapped in moisture‑resistant film and secured for container loading.

Which incoterms are most frequently used for shipping these belts?

Buyers often use FOB or CIF terms; FOB places responsibility on the buyer after the goods are loaded on the vessel, while CIF includes freight and insurance to the destination port.

Can samples be provided before a full order?

The supplier can supply a short length sample, usually up to 5 meters, to allow testing of material properties and compatibility with existing equipment.