About Anjun Technology Co., Ltd. - Computer Printers & Materials Supplier in Taiwan

Anjun Technology Co., Ltd. is based in Taiwan and currently lists six active products in its catalogue. The company focuses on computer printers and materials, specifically stereolithography (SLA) 3D printing solutions. Its offerings include three printer models - FunPlay Crystal SLA 3D Printer DIY Kit, Core 2.0 SLA 3Dprinter, and SLA High Resolution 3D Printers_Core 2.0 PLUS - as well as consumables such as a laser module, photopolymer resin, and an opal post‑processing material. The printer models fall under the HS chapter 84 for machinery (HS 8471) while the resin and laser components are classified under HS chapter 38 for chemical products (HS 3824). The catalogue therefore covers both hardware and material categories that are common in the desktop and professional SLA market.

Product Range and Specialties of Anjun Technology Co., Ltd.

Anjun’s catalogue includes three SLA printer models and three consumable items. The printer lineup spans a DIY kit, a mid‑range Core 2.0 system and the higher‑spec Core 2.0 PLUS, each employing a 405 nm UV laser source and offering XY resolution of 50 µm or finer. In the broader SLA market, printers are typically rated by layer thickness (commonly 25 - 100 µm), build volume, and laser power measured in milliwatts. Resin supplies are usually classified by type - standard, tough, flexible or high‑temperature - with typical cure wavelengths matching the 405 nm laser and a gel time of 30 - 60 seconds. Laser modules for SLA printers are generally specified by wavelength, power output (e.g., 10 - 15 mW for desktop units) and beam uniformity. Opal or similar post‑processing powders are used for surface coating and can be supplied in 1 kg or 5 kg bags, with particle sizes around 20 - 50 µm. Industry standards for SLA equipment often reference ISO/ASTM 52900 for additive manufacturing terminology and ISO/ASTM F2792 for classification of processes. Material safety data sheets (MSDS) are required for photopolymers, and buyers frequently request compliance with CE marking, RoHS, and ISO 9001 quality management for both hardware and consumables.

Trade and Export Information - Anjun Technology Co., Ltd.

Taiwan is a recognized exporter of precision manufacturing equipment and high‑performance polymers, with SLA printers and photopolymer resins routinely shipped to North America, Europe and Southeast Asian markets. HS chapter 84 (machinery) and chapter 38 (chemical products) are the primary tariff classifications for these items, and many importers apply anti‑dumping duties or require pre‑shipment inspection under the destination country’s customs regulations. Typical Incoterms used by Taiwanese suppliers include FOB Kaohsiung and CIF major ports such as Hamburg or Los Angeles, with packaging in reinforced wooden crates for printers and sealed polyethylene drums or bulk boxes for resin. Buyers of SLA systems generally expect CE‑type conformity assessment for electrical safety, UL certification for the laser module, and a declaration of compliance with REACH for chemical components. Shipping containers are often 20‑ft or 40‑ft units, with printers loaded on pallets (max 1 t per pallet) and resin packaged in tamper‑evident, UN‑rated containers to meet hazardous material regulations. Export documentation from Taiwan typically includes a commercial invoice, packing list, certificate of origin, and where required, a test report confirming laser safety class (e.g., Class 1).

Sourcing from Anjun Technology Co., Ltd. - Buyer Guidance

When sourcing SLA printers and consumables from Anjun, buyers should request the latest CE or UL test certificates for the laser module, as well as a detailed specification sheet that lists layer resolution, build volume, laser power and wiring standards. For the resin and opal material, a material safety data sheet (MSDS), a batch certificate indicating viscosity, gel time and post‑cure hardness (e.g., Shore D 80), and proof of REACH compliance are standard verification points. Samples of the printer kit or a short‑run of resin can be requested to evaluate build quality and post‑processing results. Verify that the packaging complies with ISO 11607 for medical‑grade products if the end‑use is in that sector, and confirm the supplier’s ability to meet typical lead times of 4 - 6 weeks for assembled printers and 2 - 3 weeks for consumable batches. Clarify the minimum order quantity (often one printer unit or a 25 kg resin bulk bag) and ensure that the shipping terms align with the buyer’s preferred Incoterm.

What SLA printer models are available from Anjun Technology?

Anjun lists three SLA printers: the FunPlay Crystal SLA 3D Printer DIY Kit, the Core 2.0 SLA 3Dprinter, and the SLA High Resolution 3D Printers_Core 2.0 PLUS. Each model uses a 405 nm UV laser and targets different user segments from hobbyist to high‑resolution professional builds.

What are the key technical specifications of the Core 2.0 SLA printer?

The Core 2.0 SLA printer offers a layer height range of 25 - 50 µm, a build volume of approximately 120 × 68 × 150 mm, and XY resolution of 50 µm. It is driven by a 405 nm UV laser module delivering 10 - 12 mW of power, suitable for standard photopolymer resins.

What type of resin does Anjun supply and what are its typical properties?

Anjun provides a standard photopolymer resin formulated for SLA printing. Typical properties include a viscosity of about 300 cP at 25 °C, a gel time of 30 - 60 seconds under 405 nm exposure, and a post‑cure hardness around Shore D 80.

Which certifications should a buyer request for the laser module?

Buyers should ask for CE conformity and UL laser safety certification, as well as a test report indicating the laser class (commonly Class 1 for desktop SLA units). These documents verify compliance with electrical and laser safety standards required in most import markets.

What packaging is used for the resin and opal material for export?

Resin is typically packed in sealed polyethylene drums or bulk boxes that meet UN hazardous material packaging requirements. Opal post‑processing powder is usually supplied in tamper‑evident, moisture‑proof bags ranging from 1 kg to 5 kg, each labeled with material safety data.

What HS code categories apply to Anjun’s SLA printers and consumables?

The SLA printers fall under HS Chapter 84, specifically HS 8471 for printing machinery. The resin, laser module and opal material are classified under HS Chapter 38, commonly HS 3824 for chemical products and prepared inks.

What are typical lead times and minimum order quantities for Anjun’s products?

Lead times are generally 4 - 6 weeks for fully assembled printers and 2 - 3 weeks for resin or opal batches. Minimum order quantities are usually one printer unit or a 25 kg bulk bag of resin, with no strict MOQ for the opal powder beyond a single 1 kg bag.